Product Description - 1/8" To 2" (BSP / NPT / Metrics) 1000 PSI to 20000PSI All Types Of Alloy Steel Grade -20 C to 350 C PRESSURE:- 1000 PSI to 20000PSI Product origin - MUMBAI Key Specifications/Special Features - Female x Female Connection, Female x Male Connection Male x Male Connection,OD Tube Connection (Metric) Minimum Order Size and Packaging details - 26 PIECE
Needle valves are usually used in flow-metering applications, especially when a constant, calibrated, low flow rate must be maintained for some time, such as the idle fuel flow in a carburetor. Needle valves sometimes referred to as plunger valves. A needle valve has a relatively small orifice with a long, tapered seat, and a needle-shaped plunger on the end of a screw, which exactly fits the seat. These needle valves are an ideal option for isolating or throttling applications. The self centering, non rotating stem ensures perfect seating. The rigid design gives repetitive bubble tight shut off, easy.s. Our range of needle valves has been designed with durability and performance in the spotlight. These needle valves are available in a variety of sizes (1/4, ½, 1/8 inch). Our range of needle valves has been designed with durability and performance in the spotlight. These needle valves are available in a variety of sizes (1/4, ½, 1/8 inch).
Valves are made from bar stock/forged material and are machined precisely. These valves used to Isolate, Calibrate and Drain the process lines. Range : :1/8" to 1" threaded.1/8"OD to 1"OD, 4mm OD to 25mm OD End connections :NPT/BSPT/BSP MOC :SS 304, SS 316, BRASS, MONEL, HASTALLOY, TEFLON, CS
Hitesh Metal is expertise trader & supplier for high quality Steel Needle Valves , which is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. Fatigue resistance is lower than that in butt - welded construction due to the use of fillet welds and abrupt fitting geometry, but it is still better than that of most mechanical joining methods. Stainless Steel Needle Valves offered by Hitesh Metal are used for lines conveying flammable, toxic or expensive material where no leakage can be permitted. Valves are used only in conjunction with ASME Pipe and are available in the same size range. Carbon Steel Needle Valves are used in areas where pipe - work is permanent and are designed to provide good flow characteristics. They are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller. Alloy Steel Needle Valves offered by Hitesh Metal is a good choice wherever the benefits of high leakage integrity and great structural strength are important design considerations. To join pipe to Valves and fittings or to other sections of pipe, fillet - type seal welds be used. Duplex Steel Needle Valves are produced to several ASTM standards and are manufactured in accordance with ASME B16.11. Hitesh Metal also offer these Nickel Alloy Needle Valves in different sizes, shapes and designs as per customers specifications at affordable rates. ANSI/ASME B16.10 Needle Valves Specifiactions: Materials CS, SS, Monel, Hastalloy, Duplex and High Nickel alloys Seat Metal or Soft. Connections Thread, Weld or Tube End Design Forged Body with Inline/Straight or Angle Pattern, Integral Bonnet Design Size 1/8 to 1, Custom Sizes available on request End Connection Male and Female NPT, BSPT, Socket Weld (SW) or Dual Ferrule Tube Connections, Male to Female, Female to Female Working Pressure Up to 6000 PSIG, Needle Valves are also available that can handle higher pressure Stainless Steel Needle Valves: up to 6000 psig (414 bar) Steel Needle Valves: up to 3000psig (207 bar) Brass Needle Valves: up to 3000 psig (207 bar) Temperature Rating PTFE 450F,(232C)/ Grafoil 700 F(371C) PTFE Packing: -65 F to 450 F ( -54 C to 232 C) PEEK Packing: -65 F to 600 F ( -54 C to 315 C)
Brass Needle Valve is used to connect the copper tubing, control the flow of liquids or gas requiring close regulating. Made of brass rods and brass material except for the gland O" rings. Technical Specification: 1. Applicable temperature will be -20 to 100 2. Max Pressure: 1.47Mpa (15kgf/cm2) 3. Recommended for use at less than 80% of max load pressure at temperature between 80 and 100.
Keywords:tognella valves, tognella gauge isolator needle-valves 90°angle, tognella gauge isolator needle-valves in line with lateral 1/2 interface We can supply a wide range of needle valves. Gauge isolator needle-valves in line with lateral 1/2 interface Gauge isolator needle-valves 90°angle Gauge isolator needle-valves 90° angle with lateral 1/2 interface Gauge isolator push button-valves interfaces Gauge isolator push button-valves plate interfaces We also can supply so many other kinds of valves: Tognella control valves, tognella braking valves, tognella check valves, tognella ball valves
Feature: Applicable medium: oil, water,gas and other medium. Pressure: 6000 to 10000PSI Temperature: up to 600 degree centigrade 3-way design has center-off position Flow can switch from single inlet to multiple outlets or multiple inlets to common outlet Material: SS304, 316, 316L carbon steel, brass,alloy Size : 1/8" to 1 1/2" End Connection : NPT, BSPT, ISO, G,R,PT,Socket weld, flanged end Butt weld, Tube fitting and etc. Orifice : 4.0mm Stem packing : PTFE, Grafoil. Screwed bonnet design. Leak tight seal with low operating torque. Rugged bar handle provides positive stem stem actuation Non-rotating and rotating stem tip available All valves are 100% Factory tested Specified specification available upon request OEM offered Packaging : Carton or wooden case or upon request
Single Bonnet Needle Valve
High Pressure Needle Valve
Angle Needle Valve
For the valve hole accuracy 1 m hydraulic needle valve, although AAK is 20% more expensive, its service life is twice that of its peers At the beginning of this year, Samuel asked by email about the production time of 1,000 hydraulic needle valves, He specially emphasized that the technical parameters of the hydraulic needle valves need to be the same as those samples made before, especially the valve hole accuracy must be 100% within 1 m or less. Samuel has been cooperating with AAK for 3 years. It is the first time that he deliberately emphasized as such in email. After communication, I learned that the hydraulic needle valves that AAK made samples for last time was 20% higher than that of other hydraulic valve manufacturers, so he placed the order with another manufacturer. However, now this batch of hydraulic needle valves have been complained by customers that the hydraulic winch is stuck. The root cause is that the accuracy of the hydraulic needle valve holes is uneven, and some are less than 1 m, and some higher than 1 m. After the original hydraulic needle valves were replaced by the manufacturer, complaints still continued. The boss was very dissatisfied with Samuel's purchase this time and asked him to source another hydraulic needle valve supplier. Samuel can only get back to AAK, because the sample accuracy of AAK hydraulic needle valve hole was 1 m or less. I told Samuel that the shipment of AAK hydraulic needle valves has never been lower than the sample standard. The next day, Samuel sent us the PO of 1,000 hydraulic needle valves. After 45 days, AAK delivered 1,000 hydraulic needle valves. Last week, Samuel sent an email saying that AAK hydraulic needle valves had been installed on the equipment for more than half a year, and no complaint was received. His boss would rather spend 20% more cost and must purchase the hydraulic needle valves with valve hole accuracy 1 m for 100%. I told him that even if AAK hydraulic needle valve is used properly in another year, it will not get stuck. Samuel was surprised at how AAK ensured 100% accuracy of the hydraulic needle valve hole within 1 m? For the control of the manufacturing quality of hydraulic needle valves, AAK's 3 characteristics lead the majority of hydraulic valve manufacturers. 1. On the processing equipment, the valve hole is finished with the TAMIX one-time tool walking high-speed ultra precision honing mill imported from Japan, which is thoroughly ground without traces. In mass production, the wear-resistant SPA tool effectively ensures the stability of processing, and the valve hole accuracy is guaranteed to be 0.8-1.0 m and the surface roughness reaches Ra0.2-0.3. 2. In the processing process, AAK has more than 10 years of experienced technicians with special machines and special personnel, who have engraved the dimensional accuracy of each element in their minds.
Carter comes from an manufacturing company in , and the purchase of hydraulic needle valves has been smooth in recent years. At the beginning of last year, an excavator sold by their company for less than 6 months was complained by customer. The boom of the excavator falls too fast due to its own weight, which is easy to cause danger. Their technician found that there was a problem with the hydraulic needle valve of the hydraulic system. There were obvious wear marks at the contact point between the valve spool and valve seat of the hydraulic needle valve, which was easy to leak. The leakage of the hydraulic needle valve will cause the oil saving and speed limiting circuit of the hydraulic cylinder to be uncontrollable. The boss was very angry that the equipment sold for only half a year was complained and asked Carter to find out the cause of the hydraulic needle valve problem and solve it. Carter contacted the original manufacturer of the hydraulic needle valves and requested to replace the hydraulic needle valves. The manufacturer said that the service life of hydraulic needle valves under 450bar working condition is basically 6 months. The only way to solve this complaint is to replace the hydraulic needle valves every 6 months. Such reply made Carter speechless, because his customer would not accept the high-frequency replacement of hydraulic needle valves, which not only brought a bad user experience, but also the after-sales cost was not cheap. Carter contacted all of his hydraulic needle valve suppliers, and they all replied that they were not sure to achieve a hydraulic needle valve with a service life of 1 year under the working condition of 450bar. When browsing the website, he found and left a message on the How long is the service life of hydraulic needle valves with pressure resistance of 450bar We replied directly for 1 year or more. The next day, he told the problems encountered in purchasing hydraulic needle valves at the beginning of last year in detail. After receiving the drawing of the hydraulic needle valve, we found that the hydraulic needle valve needed by Carter has much higher requirements than the ordinary hydraulic needle valves. We replied that will select specific materials for samples, which can ensure that the hydraulic needle valves can be used for more than 1 year under normal conditions. If possible, he can directly test the samples.
Material - Stainless Steel Model - NVEE Design pressure - 6000 psi Max temp - 240 degree C Type needle valves with hard seat are disigned for use on applications requiring complete isolation or throttling of the media. The conical metal tip press fitted ensures perfect alignment for positive bubble tight shut-off. Available with end connections in sizes from 1/8" to 1" and a wide choice in connections of female screwd, male screwed, male to female screwed or socket weld. Applications: High pressure line shut of Instrument isolation Drain valve Liquid and vapor service Technical Data: All dimensions are in mm Stem Press fitted hard chrome plated Grand packing PTFE Stem packing are Burnished for smooth valve operation Safety feature Back seating for preventing stem blowout Optional: NVEE 10: High pressure valves for 10000 psi pressure Nvee 20: High pressure valves for 20000 psi pressure Specifications: Site Type Length A Handle D Handle OD E 1/8" FxF 50 40 10 MxF 55 40 10 MxM 60 40 10 1/4" FxF 55 40 10 MxF 65 40 10 MxM 60 40 10 3/8" FxF 55 40 10 MxF 65 40 10 MxM 65 40 10 1/2" FxF 65 50 12 MxF 75 50 12 MxM 70 50 12 3/4" FxF 70 50 12 MxF 75 50 12 MxM 80 50 12 1" FxF 90 70 12 MxF 105 70 12 MxM 105 70 12
*stainless steel 316 forged body *available with straight and angle pattern *panel mounting *working pressure 6000 psig Standard export package
Max Working Pressure : 30,000 PSI (2069 kg/cm2) @ 25ºC (77ºF) Max. Temperature : 210ºC (410ºF) Testing Pressure : Hydrostatic Body - 45,000 PSI (3103 Kg/cm2) Hydrostatic Seat - 30,000 PSI (2069 Kg/cm2) Pneumatic Seat - 569 PSI (40 Kg/cm2) Service Medium : Liquid Gas or Vapours Service Types of valves : Needle Valve - Straight Type, Angle Type (90º) Two way & Three way Two piece, nonrotating stem tip Two piece, nonrotating stem tip Connection Size : 1/4” , 3/8” , 9/16” Orifice Size : 2.4 mm (0.093”) Gland Seal (Packing) : Glass filled PTFE: Temperature Min. -73ºC (-99.4ºF) to max. 210º (410ºF) Material : SS 304, SS 316, SS 304L, SS 316 L with NACE MR-01-75 & NACE MR-01-03 (For Sour gas service) Material certificate according to EN 10204/3.1b Body - Cold worked stainless steel Stem - 17-4 PH Handle - Stainless steel Bar stock Finish : SS Natural Mounting Arrangement : Needle Valves - Integral through-holes for bracket mounting Panel Mounting option is also available. Standard Followed : ANSI B 16.34
The Hydraulic Cartridge Needle valve that HydraForce can't make, AAK has done it in 30 days Rogelio is from Spain and we met 1 year ago. He sent inquiries about hydraulic cartridge valves to AAK for several times. Some time ago, he came to me and asked for help to make a batch of hydraulic cartridge needle valves. The hydraulic cartridge needle valve used on the hydraulic cold drawing machine they sold to Vietnam has expired the warranty period and needs to be replaced. This hydraulic cartridge needle valve is purchased from HydraForce, and it is not a standard part. HydraForce said that this valve was produced 2 years ago, it is out of stock now and will take 3-4 months to produce it. But the customer was not satisfied with this time frame and complained to his boss. In order to catch time, Rogelio contacted more than 10 Chinese manufacturers of hydraulic cartridge needle valves. They either could not benchmark with HydraForce, or they could not meet the time, so Rogelio was anxious. Rogelio remembered that AAK had supplied HydraForce for 9 consecutive years. He believed that I can help him. According to the hydraulic cartridge needle valve drawings provided by Rogelio, the production time is only 30 days. I told him that the lead time was only 30 days, and the manufacturing quality of hydraulic cartridge needle valve was up to the standard of HydraForce, few Chinese hydraulic valve manufacturers could meet these requirements. Rogelio thought that I was ready to give up, he was willing to give AAK 40 days and paid for 100 hydraulic cartridge needle valves the next day. 30 days later, AAK sent 100 hydraulic cartridge needle valves to their Vietnam factory. Rogelio informed by email last week that it was out of his expectation that AAK still completed the production in 30 days. Their customer was very satisfied with their replacement of the hydraulic cartridge needle valves. Rogelio also specifically mentioned that he had asked more than 10 hydraulic cartridge needle valve manufacturers, their lead time was at least 50 days and can not 100% guarantee to benchmark the manufacturing quality of HydraForce. AAK was the only one that could catch up with the delivery date and also benchmarked the manufacturing quality of HydraForce. For this non-standard hydraulic cartridge needle valve, AAK has 3 advantages, which are beyond the reach of most hydraulic cartridge valve manufacturers: 1.AAK adopts Japanese OKK ultra precision machine tool, and the machining accuracy of components can reach 0.01~0.3�¼m. The precision of shape and contour is 0.003 - 0.1�¼m. Its production efficiency is 30% higher, which is the cornerstone of AAK's ability to catch up the delivery. 2. AAK has been hydraulic cartridge valve ODM manufacturer of 3 world top 500 companies for 10 years. Its quality control process is more strict than the ISO certification system. We have been focusing on details and constantly optimizing technology.
Dimon is a new buyer of a hydraulic equipment manufacturing company in the United States. In the second half of last year, he purchased 100 hydraulic needle valves from an old supplier. After receiving the goods, the hydraulic needle valves were installed on the equipment. A few months later, some users complained that the pressure supply of some equipment was insufficient. Their technicians judged that the radial jamming of the valve spool of the hydraulic needle valve resulted in no flow regulation, which would lead to the failure of the power unit. The hydraulic needle valves need to be replaced with new ones as soon as possible to eliminate user complaints. His boss is not very satisfied that problem happened on even such a small number purchasing of hydraulic needle valves. Dimon is confused why the hydraulic needle valve supplier who had cooperated for 2 years would have such quality problems. He sent some problematic hydraulic needle valves back to the factory. The manufacturer replied that the accuracy of these hydraulic needle valves met the standard, but a small deviation in the size of the valve spool was caused by the deviation of the assembler. At that time, several valves were assembled at the same time in the assembly workshop, and a few deviations were difficult to avoid. Dimon realized that even the original manufacturer replaced the hydraulic needle valves with new ones, it still can not solve the problem of the radial jamming of the valve spool for 100%. He was afraid that if there were more user complaints, could he keep his job during the probation period? Dimon decided to find a new supplier of hydraulic needle valves. He left a message on our website: Can you solve the problem of radial jamming of the valve spool of hydraulic needle valve? At first, it was hard to answer this question. After several rounds of communication, we learned the story of his purchase of these 100 hydraulic needle valves. After reviewing the working conditions and drawings of hydraulic needle valve from Dimon, as well as the pictures of hydraulic needle valves from the original supplier, AAK suggested him trying samples directly. 20 days later, AAK sent 10 samples of hydraulic needle valves made per his requirements. Two months later, Dimon sent an email to us saying that he selected 5 factories from more than 20 hydraulic needle valve manufacturers to make samples. Only the samples from AAK and another factory did not have the problem of radial jamming of valve spool during the test. Their engineers suggested that AAK should be selected to replace the 100 hydraulic needle valves with potential quality problems, because the parameters of AAK hydraulic needle valve are the most stable. The boss knew that he dared to develop new suppliers and solved the hidden quality problems, although the probation period is not over yet, Dimon was approved to become a regular in advance. He told us this story privately.
Needle Valves Product Details� Nominal Size: 1/8~3/4��DN3~DN20� Working pressures up to 6000 psig (413 bar) Temperatures up to 500°F (260°C) with standard PTFE packing; up to 600°F (315°C) with optional flexible graphite packing Body Material: 316SS, Alloy 400, Titanium alloy available. Valve Type: Straight and angle-pattern valves End Connection: Tube fitting, Male and female NPT and ISO pipe. Instrument Valves , Instrument Manifold Systems , Needle Valves For Sale Supplier.
For Hydraulic Fully Adjustable Needle Valve equivalent to SUN NFBC, AAK received inquiries from a new customer in Russia Last week, we received an inquiry from a new customer in Russia for SUN NFBC Fully Adjustable Needle Valve. This is a valve that we posted in March this year, under part number E-NFBC. It has passed our internal testing for performance and durability. The advantages of AAK Hydraulic Fully Adjustable Needle Valve E-NFBC are: 1. The quality of this valve is benchmarking SUN, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-NFBC Fully Adjustable Needle Valve: Max. Operating Pressure: 350 bar (5000 psi) Capacity: 20 lpm (5 gpm) Adjustment - No. of CCW Turns from Fully Closed to Fully Open: 5 Cavity: T-162A AAK E-NFBC Hydraulic Fully Adjustable Needle Valve, benchmarking SUN NFBC, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (802) 2024-06-24
American hydraulic needle valve can not solve the problem of oil temperature rise, and AAK solved it at one time by changing the throttle area Levi is from a Canadian hydraulic equipment manufacturing company. He has purchased hydraulic needle valves from AAK for several years. We often have some discussion about hydraulic valves. In the second half of last year, they wanted to launch a new high-frequency four column hydraulic press, but the test was not successful. The hydraulic oil temperature is too high, resulting in unstable equipment running speed. Their engineers checked each circuit and found no problems. No abnormality was found in each hydraulic component, including the hydraulic needle valve. Levi contacted the original hydraulic component suppliers and did not receive any positive suggestions. A week passed without any progress, and the boss was worried. Levi thought of AAK. Although this batch of hydraulic needle valves was purchased from American manufacturer due to time constraint, some problems of the hydraulic needle valves in previous times were solved by AAK. AAK engineers found out the problem 1 day later according to the system schematic diagram, commissioning video and drawings of core hydraulic components provided by Levi. The probable reason is that the hydraulic needle valve has a problem. Levi doesn't believe it, because the hydraulic needle valves come from an American factory, they also tested the hydraulic needle valves separately, and there is no abnormality. AAK can redesign the hydraulic needle valve and send samples within 3 weeks. If AAK hydraulic needle valve can not solve the running speed problem of the equipment, we will return the trial order fee. Levi thinks there is no risk. Maybe this is also hope. 3 weeks later, we sent out the trial order of 10 hydraulic needle valves. Their engineers replaced the original hydraulic needle valves, and the four column hydraulic press was continuously tested for 48h. Although the oil temperature was also high, the speed of equipment operation was stable and the equipment operated normally. Levi was surprised that AAK newly designed hydraulic needle valve was more awesome than their American manufacturer. Their engineers admired AAK for finding and solving problems. Our customer in Belarus encountered similar problems last year, so our engineers quickly found the problem. The use frequency of this four column hydraulic press is twice as high as that of the normal one. The equipment works at high frequency for a short time, resulting in an increase in oil temperature and a decrease in oil viscosity. In this way, the flow of oil through the small hole of the hydraulic needle valve increases, which leads to a change in the originally set working speed and leads to the instability of the equipment. If the flow area of the orifice of the hydraulic needle valve is changed, the running speed of the equipment can be controlled by reducing the flow.
