Max Working Pressure : 30,000 PSI (2069 kg/cm2) @ 25ºC (77ºF) Max. Temperature : 210ºC (410ºF) Testing Pressure : Hydrostatic Body - 45,000 PSI (3103 Kg/cm2) Hydrostatic Seat - 30,000 PSI (2069 Kg/cm2) Pneumatic Seat - 569 PSI (40 Kg/cm2) Service Medium : Liquid Gas or Vapours Service Types of valves : Needle Valve - Straight Type, Angle Type (90º) Two way & Three way Two piece, nonrotating stem tip Two piece, nonrotating stem tip Connection Size : 1/4” , 3/8” , 9/16” Orifice Size : 2.4 mm (0.093”) Gland Seal (Packing) : Glass filled PTFE: Temperature Min. -73ºC (-99.4ºF) to max. 210º (410ºF) Material : SS 304, SS 316, SS 304L, SS 316 L with NACE MR-01-75 & NACE MR-01-03 (For Sour gas service) Material certificate according to EN 10204/3.1b Body - Cold worked stainless steel Stem - 17-4 PH Handle - Stainless steel Bar stock Finish : SS Natural Mounting Arrangement : Needle Valves - Integral through-holes for bracket mounting Panel Mounting option is also available. Standard Followed : ANSI B 16.34
Max Working Pressure : 10,000 PSI (689 BAR) @ 25ºC (77ºF) Max. Temperature : 540ºC (1004ºF) Testing Pressure : Hydrostatic Body - 15,000 PSI (1034 BAR) Hydrostatic Seat - 10,000 PSI (689 BAR) Pneumatic Seat - 569 PSI (39 BAR) Service Medium : Liquid Gas or Vapor Service Types of valves : Needle Valve - Straight Type, Angle Type (90º & 45º) Gland Seal : PTFE(Standard) : For temperature range -73ºC (-99.4ºF) to 210ºC (410ºF) Graphoil : For temperature range 180ºC (356ºF) to 540ºC (1004ºF) Material : Carbon steel, SS 304, SS 316, SS 316 L, Monel 400 NACE MR-01-75 & NACE MR-01-03 (For Sour gas service) can also be provide Material certificate according to EN 10204/3.1b Finish : Carbon steel - zinc plated & dichromated, SS Natural Mounting Arrangement : Needle Valves - Panel Mounting Design Standard : ANSI B 16.34
Supplier: Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,
Services: Buying office, oem, components sourcing, value added services
Buyer: In shell pecan nut, macadamia nut
Supplier: Chemical, chemical raw material, steel pipe, steel tube, stainless steel, pipe fitting, flange, fasteners, steel wire
Services: Transportation agent,customs clearance service,
Buyer: Import raw materials, bulk commodities
Pipe Clamp Fittings are connection pieces used for steel pipe frame structure and made from malleable cast iron to BS EN ISO 1562 or ASTM A197. Finish castings are hot dip galvanized to BS EN ISO 1461:1999 or ASTM A153 as standard. And it can also be supplied in a powder coated finish to RAL standard colors subject to quantity and availability from the coaters. Screws are made of stainless steel material.
Valve types: gate valve, globe valve, check valve, butterfly valve, ball valve, regulating valve, safety valve, diaphragm valve, drain valve, etc Valve body material: carbon steel, stainless steel, alloy steel Diameter: 1/2-24 (DN15-DN600) Pressure range: Class150~2500 (PN10~PN420) Connection method: RF, RTJ, BW Working temperature: -29 ~560 Operation mode: handwheel, worm gear, electric, etc
ANSI Standard : ASME B16.5 B16.36 B16.47(MSS SP-44,API 605) B16.48 Type : Welding Neck Flanges, Slip on Flanges,Threaded Flanges,Socket Welding Flanges, Blind Flanges, Orifice Flanges,Lap Joint Flanges, Ring Joint Flanges, Long Welding Neck Flanges, Figure 8 Blanks Perssure Grade : Class 150 300 400 600 900 1500 2500 EN Standard : EN 1092-1 Type : Type 01(Plate Flange),Type 02&04(Losse Plate Flange),Type 05(Blank Flange),Type 11(Weld-neck Flanges),Type 12(Hubbed Slip-on Flanges For Welding),Type 13(Hubbed Threaded Flange),Type 21(Integral Flange) Perssure Grade : PN 6 10 16 25 40 63 100 160 250 JIS Standard : JIS B2220 Type : SOP(Slip-on Plate Flange),SOH(Slip-on Hubbed Flange),SW(Socket Welding Flange),WN(Welding NeckFlange),LJ(Lap Joint Flange),TR(Threaded Flange),IT(Integral Flange),BL(Blind Flange) Perssure Grade : 5K 10K 16K 20K 30K 40K 63K GB Standard : GB/T 9124 Type : Plate Flange,Loose Plate Flange,Loose Flange,Blank Flange,Welding Neck Flange,Slip-on Flange,Threaded Flange,Integal Flange, Perssure Grade : PN 2.5 6 10 16 20 25 40 50 110 150 260 420 ISO Standard: ISO 7005 Type : Plate Flange,Loose Plate Flange,Loose Flange,Blank Flange,Welding Neck Flange,Slip-on Flange,Threaded Flange,Integal Flange, Perssure Grade : PN 2.5 6 10 16 20 25 40 50 110 150 260 420 GOST Standard : GOST 12820 12836 12821 Type : Plate Flanges, Blind Flanges, Wedling neck Flanges,Steel Butt-Welded Flanges Perssure Grade : PN 0.6-10 Contact Surface: FF RF MF TG RJ Size: 1/2" NB to 48" NB Material: Carbon Steel,Alloy Steel,Stainless Steel MOQ: 5 Nos Transportation: FCL&LCL by sea Delivery: 10-15 days after signed contract Payment: L/C or T/T or D/P or O/A
AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiCo magnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shape. Application of AlNiCo Magnet: *Electronic Ignition Systems *Watt Hour Meters *Medical Instruments *Guitar Pickups *Industrial Motors *Hand Tools *Automatic Control Appliance *Vending Machines
Supplier: Metals and minerals, steel products and agricultural products
1 steel tubes/pipes (ssaw, lsaw, erw and seamless steel pipes)
2] galvanized steel coils
3] galvanized steel sheets
4] pre painted galvanized steel sheets/coils
5] corrugated steel sheets
6] deformed steel bars / re inforcing steel bars
7] wire rods
8] wire nails
9] stainless steel coils
10] steel fence bar
11] steel strips
12] flat / round / square bars
13] pipes / fittings / flange
14} steel billets
15 agro products rices, pulses, sesame seeds, peanuts
Services: Traders
Buyer: Graphite, aluminium, quartz, steel, copper, zinc, pulses, rice, nuts and seeds