DC voltage: 2/20/200/1, 000V AC voltage: 2/20/200/700 DC current: 200ma to 20A AC current: 200ma to 20A Resistance: 200/2/20/200k/20/20m/200mω Capacitance: 20nf/2/200uf Temperature: -40 to 400/400 to 1, 000 Dwell: 3/4/5/6/8cyl Tach: 3/4/5/6/8cyl Diode test: Yes Hfe test: Yes Continuity: Yes Duty holds: Yes Date holds: Yes Backlight: Yes Maximum display: 1999 General character: Meter color: Ron-grey+ red Meter weight: 445g Size: 205 x 100 x 60mm Standard accessories: Test lead, battery, manual Standard inner packing: Color box Standard packing quantity: 30 Outer packing size: 470 x 370 x 480mm Standard CTN gross weight: 25.5kg. 30 per carton Outer packing size: 470*370*480mm Gw:24.5kg.
Function: Fuel pressure test Feature: Various connectors to fit various vehicle models Specifications: Range of fuel pressure test:0~800Kpa Range of fuel flow test:0.5~3L/Min Range of engine vacuum test:-100~0Kpa Range of backpressure test:0~60Kpa. Weight: 3.3Kg Dimensions: 400mmx315mmx95mm.
Features: 1. LCD display; 2. Ultrasonic cleaning trough built-in; 3. CE certification; 4. Tool trolley to make it more convenient; 5. Equipped with high quality Siemens pump to make it endurable; Functions: 1. Ultrasonic cleaning, dismantle the carbide of the injector; 2. Injector test, stimulate engine running condition, test injector in different speed range. Check and test injector's injection situation: atomization/spraying angle/spraying amount/spraying uniformity; 3. Leakage and block test; 4. Uniquely designed various compound bonder for all kinds of side-inlet injectors; 5. With reverse flush function, to clean inside out, to improve clean efficiency; 6. With a set of adaptor to clean injectors without dismantling it from the engine. Turning speed range: 0~15000r/min Timing pulse length: 0~9900times/step length 100 Pulse length: 0-20ms step length 0.1ms Timing: 0~10min System pressure: 0~0.6Mpa Ultrasonic cleaning power: 70W Power supply: AC220(110V)+-10% 50/60Hz Working temperature: 10¡ãC~40¡ãC Stimulant signals: 0+-5V Output scope of the pulsed signals: +5V,+12V.
Product synopsis Model:SRT-6210 1.Features: This instrument is compatible with four standards of site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD. * Multiple parameter measurement: Ra, Rz, Rq, Rt * Highly sophisticated inductance sensor * Four wave filtering methods : RC, PC-RC, GAUSS and D-P * Built-in lithium ion rechargeable battery and control circuit with high capacity * Small in size, light in weight and easy to use * Can communicate with PC computer for statistics, printing and analyzing by the optional cable and the software for RS232C interface. *Manual or automatic shut down. The tester can be switched off by pressing the Power key at any time. On the other hand, the tester will power itself off about 5 minutes after the last key operation. *The tester can memorize 7 groups of measurement results and measuring conditions for later use or download to PC. *Metric /Imperial Conversion 2.Specifications Display 4 digits, 10 mm LCD, with blue backlight Parameters: Ra, Rz, Rq, Rt Measuring Range Ra, Rq: 0.005-16.00um/0.020-629.9uinch Rz,Rt: 0.020-160.0um/0.078-6299uinch Accuracy: +10% Fluctuation of display value: Not more than 6% Sensor : Test Principle: Inductance type Radius of Probe Pin: 5um Material of Probe Pin: Diamond Dynamo-measurement of Probe: 4mN(0.4gf) Probe Angle: 90p Vertical Radius of Guiding Head: 48mm Maximum driving stroke: 17.5mm/0.7inch Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional Evaluation length: 5l Driving speed: Sampling length = 0.25mm Vt=0.135mm/s Sampling length = 0.8mm Vt=0.5mm/s Sampling length = 2.5mm Vt=1mm/s Returning Vt=1mm/s Profile digital filter Filtered Profile: RC Filtered Profile: PC-RC Filtered Profile: Gauss Non-Filtered Profile: D-P Resolution : .001m if reading ú+10m 0.01m if 10m_readingú+100m 0.1m if reading 100m Evaluation length : 5 cut-off Power Li-ion battery: rechargeable Operating conditions: Temp. 0~50µ Humidity
CNC-602A is an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle. Feature * Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely. * Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush. * Leakage test: To test the sealing and dribbling conditions of injectors under system pressure. * Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection. * Auto. test: To test injectors by simulating different working conditions. * On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle. Specification * Power supply: ?AC220V?0%, 50/60Hz;?AC110V?0%, 50/60Hz. * Input power: 250W; * Ultrasonic cleaner power: 100W; * Simulated RPM range: 10?9990rpm; step: 10rpm; Standard Lot Size , Weight , Dimensions
Description: 12 internal transducers Multi transducer systems offer a more effective and economical cleaning programme. Stand alone electrical generator Separate generator offers more protection against damage and ease service. 3 metre connecting cable 3 metre cable allows safe and secure location of important power supply. Double skinned tank Double skinned tanks give greater protection and long life. Finished in polished stainless steel Polished stainless steel is easy to clean and maintains a professional look. Internal drain & debris tracks Drain/debris tracks retain debris and maintains effective cleaning process. 12mm drain tap Allows quick draining of waste cleaning fluid. Complete with: lid and parts basket Lid keeps fluid clean and reduces fluid evaporatio
Description: The functions as following: 1 to test and analyze the injecting state. 2 to test the injector dribbling. 3 to test the injecting angle and atomizing. 4 to test the injecting volume. 5 to test the injector uniformity. 6 to test conduct the physical and chemical cleaning of the blocked or trouble injector, ultrasonic cleaning, test cleaning and on-vehicle cleaning. 7 to test the open and close injecting pressure of the injector. 8 can clean the engine without dismantling (choose matched connector). 9 can operate the auto static testdynamic test and selective test with the injecting dribblinganglesatomizationuniformity of one or more(1-6) injectors, can simulate any state of the vehicle to observe the complete process of injectors. 10 can operate automaticallyreverselyand ultrasonic cleaning with one or more injectors at different
Dealing with BMW complex electronic control Units (ECU) along the entire process chain requires reliable communication and data description, The Diagnostic Tool Set consists of a set of PC-based application which support developers, engineers and technicians in all aspects of communication with ECUs and vehicles via serial communication lines. Typical applications of the BMW Diagnostic tool include: *Specification of ECU\'s diagnostic data *Communication development *Reading and clearing error memory *Flash data uploading and downloading *Reading measurement values *Input/output control *Calibration of single ECU variables *Coding of ECU variables *Coding of ECU variants *CAN (controller Area Network) bus mode emulation *integrated solutions for on-board/off-board *fast and simple configuration of GUI and communication data instead of programming *customer specific protocols supported *long term application by supporting widespread ASAM standards *language is English and Germany Models covered: 1 series E87 3 series E30, E36, E46, E83 5series E34,E39,E53,E60,E61 6 series E63,E64 7 series E32,E38,E65,E66 8 series E31,E52 E90 Mini R50,R52,R53 X series E53 Rolls Royce Z series E85,E52.
Parameters: Motor Power: 7.5Kw x 2 Power Supply: 380V/50Hz Max Load: 5t Brake range: 0 - 9000N Speed: 2.5km/h Track: 830 - 2100mm Roller Diameter: 245mm Roller length:1000mm. Dimensions: 3100 X 840 x 420mm.
XP-STAR ú¦Benz XP-STAR realizes all the functions of official factory BENZ Star2000: Reading out and erasing fault code; Read the real-time data of sensor and actuator; coding and programming. It applies the latest high-tech central gateway system of car model 221/211/210 with software version updated to Feb. of 2007, can enter all the Benz cars, such as autobus truck, saloon car, sports car, smart car and so on. Function: Reads out and erases fault code, dynamic dataflow, ECU programming adaptation, component test, service information consulting, components location plan, wiring diagram. Testable system: Engine,AT, ABS, ASR, A/C, SRS, GM,ATA,DASX system, KEYLESS GO system, OBDII, and so on. BMW original diagnosing system software of latest version 44.0, It checks system of ENG/AT/SRS/ ABS/ EWS/LKE/BUS all of BMW 3, series 5, series7,series 8, series X and series Z. DAS: Automatic diagnosing, concise interface with easy operation, equipped with high touch screen computer, test the systems swiftly and accurately. WIS maintenance data system: Display the whole view of the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -----all in detail. Accessories: 1. Multiplexer 2. 16-PIN Cable 3. 38-PIN Cable 4. RS232 Adaptor 5. 14-Pin Sprinter Cable 6. Hard disk for software, and Cds attached Packing boxú+ Software including: Latest DAS, Wis/Wisnet, EPC/EPCnet, Star finder, ect. carton box
1)test injecting angle, atomization, dribbling and automatic testing and cleaning Press auto key. The pump start to work automatically, after work over, the pump turn off automatically, the injector keep injecting for 15s, the time valve decrease to 0, can observe the injecting angles, atomization and volume, replace or clean the injector, if appears gush, unusual angels and unusual volume, stop injecting for 30s, and observe injecting volume, time value shows 30s, the liquid will back to the fuel tank in the following 30s, then start dribbling testing for 60s, if no dribbling, the unit will starts regular testing automatically. 2)test mode at idling speed Conduct the injecting test as follows: Injecting rpm: 1600r/min Pulse width: 2.2ms Count: 3000 Timing: 112s When the producer is over, observe the injecting uniformity, and replace or clean it if the volume over 9% 3)test mode at maximum loading Conduct the injecting test as following: Injecting rpm: 4000r/min Pulse width 2.8ms Count 3000 This program can observe the injecting volume at the maximum loading 4)test mode at high speed Conduct the injecting test as following: Injecting rpm: 6500r/min Pulse width 2.5ms Count 4000 Timing 36s This program can observe the working state at the high speed. 5)test injecting with complete procedure During this procedure pulse width is 2.2ms, rpm is 1600r/min, then the rpm will up to 9975r/min, pulse width will up from 3ms to 12ms, then down to 1.1ms.Total cycle is 5 times, and running time is 20s, observe for 30s after the test, then the liquid will return for 30s. During the automatic test, press selection to pause it as you need. 53.5*48.5*55.5
Toyota Denso Test 2: (DST-2) for TOYOTA & LEXUS enables you to diagnose electronic control systems for engines, ABS's and airbags, even through Communication Diagnosis DST- 2 realizes more accurate diagnosis through CAN communication that speed is 50 times faster than conventional. Easy operation on LCD display with touch panel 5.7inch full color display with touch panel assists an easier operation. Voltmeter and Oscilloscope Not only communication basis diagnosis [Diagnostic code, ECU data monitor, Active test], but also voltmeter and oscilloscope detect alteration in the electric signal to find out the troubling part. Data recording to your PC saved data such as data-list can be downloaded to your PC. All type of Toyota(made after 2000) and Lexus included read code, clear code , data flow, action testing and guard against theft initialization function. And it also supports OBD-II. Toyota denso it2 character: 1. Touchscreen & back lighting control 2. Easy & quick 3. User needn't worry about the after service since factory has an open patio for maintenance. Toyota Tester2 Main Unit Specification: Dimensions: 145mm (W) x 223mm (H) x 71mm (D) Weight: Approx. 1380g Source Voltage: DC10-32V Power Consumption Normal: 7W (12VDC), Charging: 10W (12VDC) Operation Temperature: 0~45C Storage Temperature: -10~60C LCD display: 5.7 inch color STN (320x240), transparent type of 256 colors Adjustable brightness/contrast Touch panel Input: by finger or stylus pen Key: 4 (up, down, two function keys) Built-in clock for a time stamp PC Communication: PC card slot CFx1ch (CF standard type I, II) USB Host: 1ch. Toyota Denso IT2 Function: 1ch Serial 1ch (RS-232C) Vehicle communication CAN, ISO9141 .Back up power supply: Lithium-ion battery 7.4v 1000mAH Recharge hour ( at normal temperature) Approximate operating time: 5 hours ( fully discharge to full charge) 80 minutes (normal operation) Voltage Measurement Function Items Specification Maximum sampling rate 250s/sec Input channel 1ch Voltage range ( vertical scale) 1V/div, 2V/div, 5V / div Time range ( horizontal scale) 100ms / div, 200ms / div, 10s / div Oscilloscope Function Items Specification Maximum sampling rate 500ks/sec Input channel 2ch Trigger functions Mode Auto, normal, single Trigger 10%, 50%, and 90% of the monitor Voltage range ( vertical scale) 100mV / div, 200mV / div, 500mV / div ~10V / div Time range ( horizontal scale) 5us / div, 100us / div, 200us / div, ~10s / div( 200ms and higher is the Roll mode) Toyota denso IT2 Package List: - Mainframe -- 1pc - OBD-II -- 1pc - Charging line -- 1pc - Lin line -- 1pc - Measuring leads for multimeter 1 -- 1pc - Measuring leads for multimeter 2 -- 1pc. After sale service: 1) Free update during one year 2) Free repair and maintenance service in one year 3) Free technical support by internet or via phone.
BMW group tester one (GT1) GT1 is offered to the aftermarket in the same specification that is currently supplied to BMW franchised dealers. It is special-purpose tool of BMW Series. Gt1 is supplied with a Pentium based laptop PC on a Windows platform connected to a high specification communications and measurement interface. GT1 can complete coverage of ALL BMW systems, one thing that can only be done using the GT1, this function is called Electronic Control Unit (ECU) programming and configuration. Many of the original electronic systems on modern vehicles can now be re programmed using software; historically any changes to rectify software problems would involve a new ECU which would be purchased from the parts department and that is the only way that the independent market today is able to overcome these problems. The BMW GT1 system allows you re programme all BMW car ECU's to fix software or to install a blank ECU to a repaired vehicle. GT1 is the only system that allows you to do this and is absolutely essential if working on Freelander , the GT1 is also the only system that provides all diagnostics and programming for the very latest BMW launched this year. BMW GT1 software kit comprises of five system ,TIS system .DIS data system ; diagnosis system .measuring system and management system . you can to test and check data information same time in GT1. Test function : Read faulty code , clear faulty code , data stream. Activate state, programming , component test , maintenance data information , components location , wiring diagram etc..., tis and dis are supply all of system diagram of all of bmw car, components location, maintenance method and coding information etc. Can do completely of BMW car system. 1. GT1-SCAN Pro main body 2. Network cable 3. GT1 for vehicles with 20pin diagnostic connector 4. GT1 for vehicles with OBII diagnostic connector 5. Latest diagnostic version of software(one HDD).
Denso diagnostic tester-2 (dst-2) for toyota & lexus enables you to diagnose electronic control systems for engines, abs's and airbags, even through communication diagnosis dst- 2 realizes more accurate diagnosis through can communication that speed is 50 times faster than conventional. Easy operation on lcd display with touch panel 5.7inch full color display with touch panel assists an easier operation. Voltmeter and oscilloscope not only communication basis diagnosis [diagnostic code, ecu data monitor, active test], but also voltmeter and oscilloscope detect alteration in the electric signal to find out the troubling part. Data recording to your pc saved data such as data-list can be downloaded to your pc. Dst-2 main unit specification: Dimensions: 145mm (w) x 223mm (h) x 71mm (d) Weight: approx. 1380g Source voltage: dc10-32v Power consumption normal: 7w (12vdc), charging: 10w (12vdc) Operation temperature: 0~45c Storage temperature: -10~60c Lcd display: 5.7 inch color stn (320x240), transparent type of 256 colors adjustable brightness/contrast Touch panel input: by finger or stylus pen Key: 4 (up, down, two function keys) Built-in clock for a time stamp Pc communication: pc card slot cfx1ch (cf standard type i, ii) Usb host: 1ch. Package list: - mainframe -- 1pc -obd-ii -- 1pc -charging line -- 1pc -lin line -- 1pc -measuring leads for multimeter 1 -- 1pc - measuring leads for multimeter 2 -- 1pc Update and warranty: - update for free for one year by sending cd. - one year warranty. Standard packing
Description: The functions as following: 1o test and analyze the injecting state. 2o test the injector dribbling. 3o test the injecting angle and atomizing. 4o test the injecting volume. 5o test the injector uniformity. 6o test conduct the physical and chemical cleaning of the blocked or trouble injector, ultrasonic cleaning, test cleaning nd on-vehicle cleaning. 7o test the open and close injecting pressure of the injector. 8can clean the engine without dismantling (choose matched connector). 9can operate the auto static testdynamic test and selective test with the injecting dribblinganglesatomizationuniformity of one or more(1-4) injectors, can simulate any state of the vehicle to observe the complete process of injectors. 10.Can operate automaticallyreverselyand ultrasonic cleaning with one or more injectors at different
CE certified by kema quality B.V. / the Netherlands. This unique machine is used to correct and straighten all kinds Of defected steel and alloy rims ranging from 10 to 18. Dimensions Height....................................................................1250 mm Length.................................................................... 1110 mm Width..................................................................... 610 mm Net weight.............................................................. 370 kg Motor specifications Mechanic motor........................ .0, 55 kw, 1400 rpm, 0, 75 hp, 3 phase - single phase, 220v - 380 v Hydraulic Motor........................ 0,75 kw 1400 rpm, 1 hp, 3 Phase - single phase, 220V - 380 V Sound Level.............................. 35 db Hydraulic piston power Total pressure = =r2 x 160 (Working pressure bar) Total pressure = 3,14* (3,15 x 3,15) = 31,156kg Total pressure = 31,156 x 160 = 4 984,96kg Diameter of piston cylinder we used is 63mm which comes to as radius 3,15 cm. As you have seen above formula you can have 5 tons of total pressure while working on our RSM1800 / RSM2200 machines. Standard accessories list 1. 18 pcs rim attaching center 2. 1 pcs (mihengir) metal pointer 3. 7 pcs press tips 4. 3 pcs support axis for press tips 5. 1 pcs lever 6. 1 pcs lathe pen 7. 1 pcs upper support 8. 1 pcs lower support 9. 4 pcs Support pins 10. Flange nuts and bolts On standard export pallet 730 x 1130 x 1460 mm