Introduction : The GCAN-205 module is a CAN-Bus converter, used for Ethernet and CAN-Bus connection. It is an industrial-grade CAN-Bus converter, whose function is to realize bidirectional conversion between CAN-Bus and Ethernet of Modbus TCP protocol. Hardware Features : 1. High speed 32-bit industrial grade processor ; 2. Embedded Watchdog timer ; 3. External voltage (DC+24V, 40mA) ; 4. Electrostatic discharge (ESD) Immunity level: Contact Discharge±2KV, Air Discharge±15KV ; 5. Fast transient Burst Impedance Level: ±1KV ; 6. Surge immunity level: ±1KV ; 7. Working temperature: -40.00~ 85.00 ; 8. Working humidity: 5%~95%, no condensation ; 9. Dimensions: 115mm (L) * 100mm (W) * 22mm (H) ; 10. Support customization and OEM
The M160T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 10Mhz high speed pulse counter, 8 isolated 12bits analog inputs, supports 0~5V, 0~10V, 4~20mA, 0~20mA analog signal, 8 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure its reliable. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.
Introduction : GCAN-206 is a CAN-Bus adapter, used for data collection and data processing of CAN-Bus network. It is a high-performance adapter, whose function is to realize CAN-Bus message receiving/transmitting and monitoring. Features Computer interface: USB1.0, USB2.0, USB3.0 Support CAN2.0A and CAN2.0B, conform to ISO/DIS11898 Support Windows operating system: Windows XP, 7, 8, 10, etc Support secondary development, we can provide routine such as VC, VB, Net, Delphi, Labview, C + + builder and others Support ECANTools testing software Support customization Function The relay function of GCAN-206 can transmit the same or different baud rate's CAN-Bus data to each other.
Introduction: The GCAN-202(CANET II) is a CAN-Bus converter, used for Ethernet converting CAN-Bus. It is an industrial-grade CAN-Bus converter, whose function is to realize interconnection easier and extends the application scope of CAN-Bus. Function
: 1.Baud rate modification online Support the basic working parameters configuration of module by Ethernet transmitting data to module. Use this function, itâ??s more convenient to modify some basic CAN-Bus communication parameters.If you want to know more, please contact us. 2.CAN-Bus close to restart function: When CAN-Bus failed to receive/transmit data due to EMI, CAN-Bus hung on, GCAN-202 would restart the part of CAN-Bus, then restore communication. 3.Format conversion
GCAN-203 has a standard CAN-Bus interface. GCAN-203 can send CAN-Bus date to other equipment with Bluetooth. CAN-Bus baud rates range from 5Kbps to 1Mbps; CAN-Bus isolation module insulation voltage: DC 1500V; Maximum data traffic: 300 frames per second; Bluetooth using 2.0; Power supply: 9~30V (20mAï¼?24V DC); Installation method: DIN rail; temperature range: -40 â?? ~ +85 â??; Size: (L) 112mm * (W) 70mm * (H) 25mm.
309 Gcan 205 Ethernet Mobus Tcp To Can Bus Converter Suppliers
Short on time? Let Gcan 205 Ethernet Mobus Tcp To Can Bus Converter sellers contact you.
Introduction : The GCAN-211 is a CAN-Bus converter, used for WiFi and CAN-Bus connection. It is a high-performance CAN-Bus converter, whose function is to realize interconnection easier and extends the application scope of CAN-Bus. Hardware Features : 1. High speed 32-bit industrial grade processor ; 2. Embedded Watchdog timer ; 3. FLASH storage, can store parameters ; 4. External voltage (DC+9~30V), recommend voltage12V/24V ; 5. Current: 80mA, 24V DC ; 6. Electrostatic discharge (ESD) Immunity level: Contact Discharge±2KV, Air Discharge±15KV ; 7. Fast transient Burst Impedance Level: ±1KV ; 8. Surge immunity level: ±1KV ; 9. Working temperature: -40.0~ 85.; 10. Working humidity: 5%~95%, no condensation ; 11. Dimensions: 118mm (L) * 94mm (W) * 23mm (H) Function : The GCAN-211 module can integrate CAN-Bus equipment into Ethernet, conform to common PC-CAN equipment.
Support 10/100m remote manageable fx media converters, 10/100/1000m remote manageable fx media converters, 1 fx + 2 RJ45 ethernet media converter, 125m~4.25g oeo, and 10g oeo managed at the same time
Cover all functions of common fiber media converters, what's more, it supports protocols like snmp, web, telnet and console
They can realize the integrated management to all chassis.
Media converter card supports protocols like q-in-q double tag vlan, ieee802.1q tag vlan and ieee802.3x flow control
Interface for management: rs232 console port (RJ45) and 10/100mbps RJ-45 ethernet port.
Supporting remote and local management.
With centralized management and top tree, several chassis can be managed in the same interface at the same time; with grouping management any converter can be conveniently manipulated among many converters.
-10/100M self-adaptive Ethernet Interface
-Support ATUO MDI/MDIX, allowing crossover cable connection or straight-through cable connection
-Selectable Baud rate between 1299bps and 921.6Kbps -Build-in WEB server, allowing users to configure their webpage easily
-Auto reconnection after a network break, ensure the reliable TCP connection for the whole network
-Support DNS, can achieve a communication using the domain name
-Compatible to SOCKET working modes (TCP Server, TCP Client, UDP and etc.), the upper layer machine software is written strictly following the SOCKET rules
-TCP modes supports multi connections, specific data sending after password verifying, allowing up to 4 user to manage a single embedded device at a same time
-Advanced security mechanisms, prevent illegal access from unauthorized visitors, provide IP verifying firewall, and up to 8 configurable IP or IP segment certifications
-Support the local and remote upgrading of the firmware;Support AT Command configuration;Support remote configuration
-16 bits ARM7 CPU;
-Ethernet: 10/100Mbps
-Protections: build-in 2KV surge protection
-Type:RS232, RS485
-Control Signals :TXD,RXD,GND
-Parity: None, Even, Odd
-Data Bit: 5, 6, 7 or 8 bits
-Stop Bit: 1 or 1.5 bits
-Flow Control: Non
-Baud Rate: 1200bps~921.6Kbps
-Compatible Protocol: Ethernet, ARP, IP, UDP, TCP, BootP
-Network Services: DHCP, DNS, PPPoE, TFTP, HTTP, UDP Broadcasting -Client/Server: Server
-Ethernet Connector: RJ-45
-Ethernet Speed/Duplex: Auto-negotiation 10/100Mbps, Full/Half duplex -Auto-MDIX: Yes -WOL: Magic Packet, Wakeup Frame, Link-Up events
-Software Tool: VSP Driver, DS Manager, Web Server
-Configuration Mode: Web browser configuration tool, Windows Hyper Terminal, Telnet, Serial port configuration
-Power Input: 3.3V DC
-Physical Size (Wí-Dí-H): 77.5í-41.7í-22.7(mm)
Gigabit Fiber Media Converter with 10/100/1000M single mode Single Fiber Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100/1000M UTP interface (TX) and 1000M Fiber interface (FX). The traditional 10/100/1000M Ethernet can be extended to the distance of 100km through Single Optical Fiber link. The performance and quality of the products are excellent because of adopting latest IC from Taiwan. It must be used in couples, because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe the conditions of network. The Series product with reasonable price is especially designed for network end-users. There are also many other advantages such as isolation protection, good data security, working stability and easy maintenance.
2.Technical Parameters
Technical Parameters for 10/100/1000M Adaptive Fast Ethernet Optical Media Converter
Number of Network Ports1 channel
Number of Optical Ports1 channelFTTH 10/100/1000M WDM Gigabit Ethernet Fiber Optic Media Converter
Transmission Rateself-adaptive 10/100/1000M
Protocol supportedIEEE802.3/IEEE802.3U etc.
Fiber TypeSingle Fiber
Optic modeSingle Mode
Transmission modehalf / full duplex
Overall Power
Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter
SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly.
Features:
Web, SNMP, Console management
Hot-swappable module
Available with ST, SC, or WDM Simplex SC single-fiber connectors
Auto MDI/MDI-X on copper port
Auto-negotiation on copper port
LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision
Link-Fault Signaling illuminates to indicate link failure
Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link
Local and remote loopback
The fiber media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.
Main features:
Support ieee802.3u 10/100base-tx/fx ieee802.3x protocol.
With the function of automatic recovery to prevent system halt.
Indicate the working status.
Avoiding the interference of electromagnetic wave, radio frequency and terrestrial current.
Optional inside and outside power supply.
No adjust electrical and optical environment.
Led indicator light shows the working performance status.
Duplex mode:
Fiber media converter supports full duplex and semi duplex modes, 10/100mbps automatic protocol.
Inserting to 14 slots rack with play and plug.
Led status indicator light makes easy diagnosing network and checking troubleshooting.
Good flow control and reset fuction prevent system halt.
The fiber media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.
Main features:
Support ieee802.3u 10/100base-tx/fx ieee802.3x protocol.
With the function of automatic recovery to prevent system halt.
Indicate the working status.
Avoiding the interference of electromagnetic wave, radio frequency and terrestrial current.
Optional inside and outside power supply.
No adjust electrical and optical environment.
Led indicator light shows the working performance status.
Duplex mode:
Fiber media converter supports full duplex and semi duplex modes, 10/100mbps automatic protocol.
Inserting to 14 slots rack with play and plug.
Led status indicator light makes easy diagnosing network and checking troubleshooting.
Good flow control and reset fuction prevent system halt.
GVE-Tplus is an upgrade of GVE-T. It is based on the ASIC circuitry design technology. It is a multi-functional, multi-purpose E1/G.703 to V.35 and LAN three-in-one multiplexer, which is also knowns as the three-in-one interface converter.
GVE-Tplus can not only be set up into GVE-T, but also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N*64Kbps(N=1--31). The work mode can be either internal clock and slave-clock, or N*64Kbps(N=1--31) external clock to achieve end-linking line.
GVE-Tplus can be set up into long-range Ethernet bridge from V.35 to LAN interface. With low cost, it is suitable for use in bridge connection which is sensitive to cost or use in LAN as a stretcher or subsection. It can learn automatically MAC address in the connected LAN and only transmit the aim address to frame in another LAN. There are more than 10000 addresses in its LAN table. And they can be updated automatically. The highest speed of filtrating and transmission is 30000 frame/second(line speed). The buffer size is 64M. The throughput delay is 1 frame. When it is used as a stretcher or subsection, it can forbid filtration so that all traffic can be broadcasted in WAN. 10baseT interface can run in full duplex Ethernet with topology and improve data throughput by eliminating filled blanks in the 64 bytes frames. Without any negotiation in V.35 port, it is specially suitable for use in satellites and other wireless broadcast.
GVE-Tplus(E1/G.703 to V.35 Ehernet converter
Detaile Selling Lead Description
Features:
1) GVE-T plus can convert E1 to both V.35 interface and LAN interface
2) Bandwidth of every port can be set into N x 64kbps (N=1-31) continuous data stream, although the total bandwidth of the two ports must be no more than 31 and must be inserted into PCM time slot of E1. It supports choices of CRC4 on/off and CAS/CCS (30 & 31 time slot)
3) GVE-T plus also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N x 64kbps (N=1-31). The work mode can be either internal clock and slave-clock, or N x 64kbps (N=1-31) external clock to achieve end- linking line
4) GVE-T plus can be set up into long-range Ethernet Bridge from V.35 to LAN interface
5) GVE-T plus has two transmission modes to choose from: data and image
6) GVE-T plus has local and remote loop backs. Therefore user can use circuitry-test and malfunction diagnosis conveniently to perform port-to-port integrity test
Detailed Product Description
Ethernet features:
1) LAN table: 10,000 automatic learning and updating
2) Filtering and forwarding: 30,000 frames / second
3) Buffer size: 64M
4) Throughput delay: 1 frame
5) VLAN: comply with 802.1Q
LAN feature:
1) Standard: conforms to IEE802.3 / Ethernet
2) Work mode: full duplex / half duplex
3) Data rate: 10Mbps
4) Physical interface: 10 BaseT (UTP), shielded RJ-45
5) WAN E1 / G.703 feature:
6) Line transmission rate: N 64Kbps (N=1-31) 2048Kbps
7) Line coding options: HDB3
8) Format of line frame: G.703 (framed / unframed)
9) Line interface: BNC; RJ45
Transmission features:
1) Comply with G.703
2) Rate of data transmission: N 64Kbps (N=1-31)
3) Transmission mode: synchronization
4) Data interface: V.35 or V.24 / RS232C DCE
5) Clock: master clock; slave clock; external clock
6) Testing methods: local analogy loopback test; remote digital loopback test
Feature:
1) Power supply: 220VACf+10%, 50Hz 48V DC (optional)
2) Power consumption: 5W
3) Volume: 225 x 145 x 40mm; 9" (L) x 5.8" (W) x 1.6" (H)
4) Temperature: 0 - 40fpC
Managed Media Converter is a 10/100Base-TX auto negotiation and auto MDI/MDIX cable selection Fast Ethernet Media Converter with intelligent network management that translates transmission signals from a twisted-pair 10Base-T or 100Base-TX cable to 100Base-FX fiber optic cable. It enables network managers and network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime. With its SNMP manager, user can monitor and configure the Copper Port and Optical Port of center chassis and remote standalone easily. Besides, user can control the bandwidth rate limiting as N*32Kbps.
Hardware Function
Support 10Base-T, 100Base-TX, 100Base-FX
Fully compatible with IEEE802.3, IEEE802.3u, IEEE802.3x standards
Up to 5km distance on multi mode optical port and 120km distance on single mode optical port
High-performance auto-negotiation chips make sure the data transfer with higher
Security, stability and without block.
Up to 1916 bytes package forwarded
Support half/full duplex mode Auto-negotiate
Low power consumption, low heat generation and excellent compatibility
10Watt professional communication power supply module inside the standalone.
Chassis supports double redundant power supply modules and each power supply module
Supports up to 100 Watt power output for the security and stability
Support hot-swap for all the modules, but not including management module
Single-strand/dual-strand optical module selectable, FC/SC/ST optical port slectable and standalone/16-slot chassis selectable.
Supports SNMP management (only for management device) MDI-MDIX Auto-crossover supported
Plug-and-Play installation
Support Jumbo frame (64-9216 Byte)
Support Voltage Monitor
Support full/half duplex auto-negotiation
Provides one RJ-45 twisted pair 1000Mbps Ethernet port and one 1000BASE-Fx port
Comply with IEEE802.3z 1000Base-SX/LX &IEEE 802.3ab 1000Base-T
LED indication: 1000M,FX, POW, TXD, FRX, FDX/HDX
Description:
10-100-1000M designed to fit the emerging deployment needs of optical fiber network. This stand-alone converter allows you to connect Gigabit twisted-pair network to optical-fiber network easily and cost effectively to a maximum distance 120KM.
10-100-1000M is fully compliant with IEEE 802.3z & 802.3ab standards. The Installation & operation procedures of the -10-100-1000M are simple & straightforward. User can monitor the real time operation status easily via a set of LEDs located in the front panel.
Scunoe video digital fiber converter transceivers can simultaneously transmit 1-64 channels of 8-bit digitally encoded video / return or bidirectional data / unidirectional or bidirectional audio / ethernet /telephone / dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in alications where the cameras have p/t/z capabilities. Plug and play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. Led indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation , which is suitable for different working environment .
Product characteristics
1. 8-bit digitally encoded and non-compression video transmission
2. Directly compatible with ntsc, pal, and secam cctv camera systems and support rs-232, rs-422, and rs-485 data protocols
3. Support any high-resolution video signal
4. Automatic compatible pal, ntsc and secam video system
5. Power supply and other parameter state indication, which can monitor the operation condition of system
6. Support no-damage regenerative trunk of video
7. Constant input optical power, and large dynamic range , no electrical or optical adjustments required .
8. Special asic design .
9. Industry-grade of operating temperature from -10 to 75 , which is alied to the different working environment
10. Hot-swap function
11. Stand-alone type or card-type installed in 19í»í» 2u or 4u rack-mount chassis.
Operating voltage: dc5v (we will offer external ower suly from ac96-240v to dc5v for each unit)
Operating temperature: -10 to +75
Storing temperature: -55 to +85
Humidity: 0 to 95% non-condensing
Application :
Intelligent transportation system
Connection of sub-network for surveillance center
Public security surveillance
High way & toll station surveillance
Industrial closed circuit television surveillance
PI7600 series energy saving (frequency inverter AC drives)
Main technical features:
1) Power range: 0.75~11KW
2) Voltage: 3AC 220/380/440V -15%~15%
3) Output frequency: 0.00 ~ 800.00Hz
4).Central control module based on DSP,realizes high-speed and high performance control.
5).Integrate V/F control,V/F+PG control,vector+PG control.
6).3 space voltage vector waveform produce methods.
7).Dead compensate function,realize low frequency and large output torque control.
8).Automatic slip compensate .
9).At most 7 steps speed control and 8 steps acceleration control can be realized.
10).6 programmable output control terminals.
11).Internal PID function,realize high performance closed loop control.
12).PID regulate DC braking.
13).Speed pursue starting and restart after momentary power loss.
14).Forced communicated function ,support standard RS485 and Can Bus,supply remote keyboard control function.
15).Special converse module (IGBT) temperature control function,adjustable fan control,timely reduce motor noise and temperature.
16).High-efficient faults inquiry and record function ,conveniently obviate the fault.
17).paramater protection function
18).Unique design,make frequency converter least pollution to the power.
19).Outstanding behave 3-phase AC synchronous motor of permanent magnetism control.
20) Control mode: Vector control with PG (VC), sensorless vector control (SVC), V/F control
21) Overload capacity: 150% rated current for 60 s (SVC), 180% rated current for 10 s (VC)
22) Multi-functional Quick/Jog key: Access common used parameter quickly
23) Ambient temperature: -10~40 degree
24) Altitude: 0~1000 m, 1000~4000 m with derating
25) 30 kinds of protection function
26) User can plug in option card to achieve specialized inverter for different application
27) Avoid high temperature and moisture and avoid being wetted due to raining, with the humidity below 90%RH (not dewing).
Typical application:Injection molding machine, Air compressor, Pressing machine, Air conditioner .
PI7800 series energy saving cabinet (frequency inverter AC drives)
Main technical features:
1) Power range: 11~630KW
2) Voltage: 3AC 220/380/440V -15%~15%
3) Output frequency: 0.00 ~ 800.00Hz
4).Central control module based on DSP,realizes high-speed and high performance control.
5).Integrate V/F control,V/F+PG control,vector+PG control.
6).3 space voltage vector waveform produce methods.
7).Dead compensate function,realize low frequency and large output torque control.
8).Automatic slip compensate .
9).At most 7 steps speed control and 8 steps acceleration control can be realized.
10).6 programmable output control terminals.
11).Internal PID function,realize high performance closed loop control.
12).PID regulate DC braking.
13).Speed pursue starting and restart after momentary power loss.
14).Forced communicated function ,support standard RS485 and Can Bus,supply remote keyboard control function.
15).Special converse module (IGBT) temperature control function,adjustable fan control,timely reduce motor noise and temperature.
16).High-efficient faults inquiry and record function ,conveniently obviate the fault.
17).paramater protection function
18).Unique design,make frequency converter least pollution to the power.
19).Outstanding behave 3-phase AC synchronous motor of permanent magnetism control.
20) Control mode: Vector control with PG (VC), sensorless vector control (SVC), V/F control
21) Overload capacity: 150% rated current for 60 s (SVC), 180% rated current for 10 s (VC)
22) Multi-functional Quick/Jog key: Access common used parameter quickly
23) Ambient temperature: -10~40 degree
24) Altitude: 0~1000 m, 1000~4000 m with derating
25) 30 kinds of protection function
26) User can plug in option card to achieve specialized inverter for different application
27) Avoid high temperature and moisture and avoid being wetted due to raining, with the humidity below 90%RH (not dewing).
Typical application:Injection molding machine, Air compressor, Pressing machine, Air conditioner
Paper Carton or Wooden Carton.
309 Gcan 205 Ethernet Mobus Tcp To Can Bus Converter Suppliers
Short on time? Let Gcan 205 Ethernet Mobus Tcp To Can Bus Converter sellers contact you.
