Gve(e1, g.703 to v.35, v.24 converter) Gve(e1, g.703 to v.35, v.24 converter) Detailed selling lead description Features: 1) v-gve is an asic-based converter using one e1/g.703 to convert to v.35 2) can convert successive n x 64k (n=1-32) data stream into pcm signal of e1, the data rate is up to 2048kbps 3) placed in e1 frame, data user just needs necessary timeslot 4) setting timeslot is continuous and according to rate of data port 5) the data ports have v.35 and v.24/rs232c which are optional 6) the ports support external clock and become linking end line 7) v-gve satisfies the requirements of g.703, g.704&g.706 of itu 8) v-gve has local and remote loop backs. Therefore user can use circuitry-test and malfunction diagnose conveniently Detailed product description Features: 1) rate of data transition: n x 64kbps (n=1-31), 2, 048kbps 2) transmission mode: synchronization 3) line interface: impedance 75 ohm, physical interface bnc; impedance 120 ohm, physical interface rj45 4) transmission features: comply with g.703 5) clock: line; external 6) testing method: local analogy loopback, remote digital loopback 7) dce interface: v.35 or v.24/rs232c 8) power supply: 220v f+ 10%, 50hz; 48v dc (optional) 9) power consumption: 5w 10) volume (l x w x h): 225 x 145 x 40mm; 9" x 5.8" x 1.6" 11) temperature: 0 - 40fpc 12) humidity: 0~95%
Gve-tplus(e1/g.703 to v.35 ehernet converter GVE-Tplus(E1/G.703 to V.35 Ehernet converter Detaile Selling Lead Description Features: 1) GVE-T plus can convert E1 to both V.35 interface and LAN interface 2) Bandwidth of every port can be set into N x 64kbps (N=1-31) continuous data stream, although the total bandwidth of the two ports must be no more than 31 and must be inserted into PCM time slot of E1. It supports choices of CRC4 on/off and CAS/CCS (30 & 31 time slot) 3) GVE-T plus also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N x 64kbps (N=1-31). The work mode can be either internal clock and slave-clock, or N x 64kbps (N=1-31) external clock to achieve end- linking line 4) GVE-T plus can be set up into long-range Ethernet Bridge from V.35 to LAN interface 5) GVE-T plus has two transmission modes to choose from: data and image 6) GVE-T plus has local and remote loop backs. Therefore user can use circuitry-test and malfunction diagnosis conveniently to perform port-to-port integrity test Detailed Product Description Ethernet features: 1) LAN table: 10,000 automatic learning and updating 2) Filtering and forwarding: 30,000 frames / second 3) Buffer size: 64M 4) Throughput delay: 1 frame 5) VLAN: comply with 802.1Q LAN feature: 1) Standard: conforms to IEE802.3 / Ethernet 2) Work mode: full duplex / half duplex 3) Data rate: 10Mbps 4) Physical interface: 10 BaseT (UTP), shielded RJ-45 5) WAN E1 / G.703 feature: 6) Line transmission rate: N 64Kbps (N=1-31) 2048Kbps 7) Line coding options: HDB3 8) Format of line frame: G.703 (framed / unframed) 9) Line interface: BNC; RJ45 Transmission features: 1) Comply with G.703 2) Rate of data transmission: N 64Kbps (N=1-31) 3) Transmission mode: synchronization 4) Data interface: V.35 or V.24 / RS232C DCE 5) Clock: master clock; slave clock; external clock 6) Testing methods: local analogy loopback test; remote digital loopback test Feature: 1) Power supply: 220VACf+10%, 50Hz 48V DC (optional) 2) Power consumption: 5W 3) Volume: 225 x 145 x 40mm; 9" (L) x 5.8" (W) x 1.6" (H) 4) Temperature: 0 - 40fpC
Dsu128(2 wires 128k, ddn, baseband modem) Detailed selling lead description Features: 1) a high-performance 2-wire full duplex base-band modem based on dsp and lsi technology 2) transmission rate is up to 128kbps 3) supports synchronous and asynchronous modes and is suitable for loop between user terminal And interface of ddn or x.25 4) because it has echo cancellation technique and adaptive equal technology and high- performance 2b1q lines coding technology, it has good transmission property 5) the transmission distance in 0.5mm lines can be up to 7.5km 6) the product conforms to the regulated lines specification of ansi15 loop back test and the lines Transmission requirement of post and telecom office of china 7) v-dsu128 is compatible with asm-31 of rad, loop-u3500, dt128 of tainet, and so on 1) power supply: 220v acf+10%, 50hz; 48v dc (optional) 2) power consumption: 5w 3) dimensions (l x w h): 225mm x 145mm x 40mm (9" x 5.8" x 1.6") 4) temperature: 0 ~ 40fpc 5) humidity: 0 ~ 95%
Fme(fiber optic modem) Detailed selling lead description Fme is high-speed fiber optic modem with remote configuration based on asic circuitry technology. It supports user-selectable rates between n*64kbps (n=1--31) and 2048 kbps. The fiber interface is sc (single module).Transmission distance is up to 60km. The product fully conforms to part 15 of fcc regulation. With remote configuration, the fme rate of user terminal follows the configuration of the fme of master terminal automatically without any other setup. Data interface of fme can be v.35/v.24/rs232 or g.703. E1 rate supports framed mode and unframed mode, which are known as n*64 kbps (n=1--31) and transparent 2048 kbps. External clock, internal clock, and slave clock are supported. With the function of integrated diagnosis, it can perform tests of local analog loop back and remote digital loop back to achieve end-to-end integrity test. Detailed product description Feature: 1) fiber optic modes: 8.3/125mum, 8.7/125mum, 9/125mum, 10/125mum, single module 2) transmission distance: 0-60km 3) fiber optic interface: sc 4) length of working wave: options: 1, 310nm, 1, 550nm 5) transmitting electrical level: 0~6dbm 6) receiving sensitivity: -36dbm 7) decaying: 1, 310nm window0.4db/km, 1, 550nm window 0.25db/km 8) data interface: v.35 mode: fmve, g.703 mode: fmge 9) data rate: n*64kbps (n=1 - 31); 2, 048kbps 10) transmission mode: synchronous 11) line interface: bnc; rj45 12) transmission features: conforms to g.703 13) clock: line clock, external clock, internal clock 14) test methods: local analog loop back test and remote digital loop back test 15) dce interface v.35 or v.24/rs232c 1) power supply: 220vacf+10%, 50hz; 48vdc(optional) 2) power consumption: 5w; 3) dimension (l x w x h): 225 x 145x 40mm, 9" x 5.8" x 1.6" 4) temperature: 0 - 40fpc 5) humidity: 0~95%
Msdsl(2wire g.Shdsl modem adsl) Detailed selling lead description Features: 1) msdsl is fpga-based 2-wire 2304kbps modem 2) according with itu g.Shdsl standard, with best concocting technology and very good frequency spectrum compatibility 3) has 3.5 - 9.7km transmission distance in special lines with 24awg (0.5mm) and 26 awg (0.4mm) 4) can be used in every high-grade and high-speed telecoms operation such as transmitting voice, data and images 5) also supports n x 64kbps rate (n=1~32) of interface of v.35, e1(g.703) and ethernet. Msdsl has strong supervisory control function Detailed product description Features: 1) line interface 2) fully conforms to standard of ydn 056-1997 3) transmission rate: n x 64kbps + 8kbps (n=3~36) 4) code: pam16 5) line impedance: 135 ohm 6) signal electrical level: +13.5 +/- 0.5 dbm 7) line wire interface: a pair of passive twisted-line, rj45 8) code error rate: f_10 - 9 9) transmission distance without linkup: 3.5~9.7km (0.4~0.8mm wire size) 10) data interface 1 (e1 interface) feature 11) transmission rate: n x 64kbps (n=1~32) 12) line coding: hdb3 13) line impedance: 75 ohm/120 ohm 14) interface standard: conforms to ccitt g.703 standard 15) data interface: (v.35 / v.24) 16) transmission rate: n x 64kbps (n=3~36); v24 (64k; 128k) 17) work mode: dce 18) work circumstances 1) power supply: 220vacf+10%, 50hz; 48v dc (optional) 2) power consumption:
Supplier: Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,
Services: Buying office, oem, components sourcing, value added services
Buyer: In shell pecan nut, macadamia nut
For the Mosquito killer Led Bulb Light, is a 900 lumen bulb that doubles as an insect killer. The light features a blue UV LED which attracts insects into a Mosquito Killer grid.And the Mosquito Killer grid uses only 1W of electricity, while the light itself uses a meager 9W – and both can be used independently.They are used at home and outdoor. A brush is provided to clean off insects once the bulb switched-off.Compare to other traditional mosquito killer, this bulb has no chemicals, no sprays and hence no fumes to our life. 2nd generation 2-in-1 LED LIGHT Bulb Plus LED Mosquito Killer Bulb Wattage: 10W Blue UV light Lumen: 900-1000lm Color Temperature (CCT): 6500K Input Voltage: AC 90-130V & 220v-240V With CE and ROHS Operation: Step1: Switch it on,both lighting +killing are on. Step2: Switch on again,light off,only killing on. Step3: Switch on again,killing off,only light on. Step4: Switch off, both off.
Features: 100/1000BASE-T1 via Marvell 88Q2112 PHY DC Voltage Requirements: 4.5-40Vdc Item will require the following items to work fully: Software, Cables, USB C cable Items Included: Intrepid Rad Moon 2 Media Converter Cable W/ power connector on one end 4500 units available
Condition New Model Short Magnetic Safety Switch Type Safety Switch MPN XCS DMC5902 Brand Telemecanique
