Find Verified Steel Hardware Buy Leads

The buyer is interested to receive quotations for the following RFQ -

Product Name: Galvanized Steel Preformed Guy Grips And Bull Dog Clamps

Specifications:
- Galvanized steel preformed stay grips of diameter range (11.8-12.2) mm suitable for attaching (7/4.0) mm steel strand stay wire to stay insulator, minimum rated holding strength (9,500) kgf, 0.8-meter overall length, right hand lay direction, and cross over starting at (140) mm. the preformed shall be hot-dipped galvanized to BS en 10244-2:2001 or latest equivalent approved standard.
- The number of grip strands shall not less than five strands.
- 4. Bull Dog Clamps:
- Bull Dog Clamp 130 K.N 7/8 inch U bolts According to ISO 898-1: 2009 grade 8.8 and Nuts dip galvanized the nuts shall be finger tight. the clamp shall be provided with a plain and spring washer.
- The base of the clamp shall be of malleable iron and dip galvanized to ISO 1461-2009, and the U bolts and nuts shall be of mild steel and dip galvanized in accordance with the above-mentioned standards.
- The mechanical properties of bolts, nuts, plain, spring washer, and clamp shall be as ISO 898-1 (2009)

Quantity Required: Galvanized Steel Preformed Guy Grips, QTY = 40000 And Bull Dog Clamps 130 K.N 7/8 inch. Qty = 13000

Quantity Required : 13000 - 40000 Piece/Pieces(sample)

Shipping Terms : CFR

Destination Port : Aqaba Port, Jordan

Payment Terms : 100% by irrevocable L/C as per IDECO payment terms

Looking for suppliers from : Worldwide

Contact : Hamzeh Alkam

The buyer would like to receive quotations for -

Prodcut Name: Steel Beams

Specifications :
- Hot Rolled Steel (I Beam 10)
- IPE 100
- Length: 4.90m, 5.90m

Quantity Required : 1 Twenty-Foot Container

Shipping Terms : CIF

Destination Port : Aqaba Port, Jordan

Payment Terms : 20%-30% Down Payment, And Remaining After Sending A Copy Of B/L

Looking for suppliers from : Worldwide

Contact : Tariq

The buyer is interested to receive quotations for the following RFQ -

Product Name: Tubular Steel Poles

Specifications:
Type: Hot Dip Galvanized Tubular Steel Poles – Swagged Type
Size: Standard

Quantity Required : 16750 Pole/Poles

Shipping Terms : CFR

Destination Port : Aqaba, Jordan

Payment Terms : L/C

Looking for suppliers from : Worldwide

Contact : Said Alkam

The buyer is interested to receive quotations for the following RFQ -

Product Name: Stay Wires

Specifications:
- 65 kN Stay Wires lengths on each drum shall be 200 Meters and all drums shall contain only one length
- 130 kN Stay Wires lengths on each drum shall be 100 Meters and all drums shall contain only one length

Quantity Required: Rated 65kN, 7/4mm, Stay Wire, suitable for OHL Network installations. With the ability of binding 180o by hand, QTY = 85 KM
Rated 130kN, 19/3.55mm, Stay Wire, suitable for OHL Network installations. With the ability to be bent 180o by hand, QTY = 30 KM

Quantity Required : 115 Kilometer/Kilometers(sample)

Shipping Terms : CFR

Destination Port : Aqaba Port, Jordan

Payment Terms : 100 % by irrevocable L/C as per IDECO payment terms

Looking for suppliers from : Worldwide

Contact : Said Alkam

Please quote for the following wholesale product requirement -

Product Name: Fabricated Steel

Specifications :
Material Fabricated 100%
Size Customize

Quantity Required : 1 Less than Container Load/LCL

Shipping Terms : FCA Or FOB

Destination Port : Tokyo, Japan

Payment Terms : L/C Or T/T

Looking for suppliers from : Worldwide

Contact : Tamaki

Please provide a quotation to the following requirement from the importer -

Product Name: Galvanized Steel Angles And C Channels

Specifications:
1.Galvanized Steel Angles, 10cm * 10cm * 10mm, of a length 3m Cross Arm (F) LEFT.- 1800 units
2 Galvanized Steel Angles, 10cm * 10cm * 10mm, of a length 3m Cross Arm (F)- 1800 units
3 Galvanized Steel Angles, 10cm * 10cm * 10mm, of a length 3m SECTION- 1400 units
4 Galvanized Steel Angles, 10cm * 10cm * 10mm, of a length 3m S T T LEFT .- 150 units
5 Galvanized Steel Angles, 10cm * 10cm * 10mm, of a length 3m S T T RIGHT.- 150 units
6 Galvanized Steel Angles, 5cm * 5cm * 5mm, of a length 2m.- 11 units
7 Galvanized Steel Angles, 5cm * 5cm * 5mm, of a length 1.48 m.- 2500 units
8 Galvanized Steel Angles Beveled, 5cm * 5cm * 5mm, of a length 1.48 m.- 2500 units
9 Galvanized Steel Angles, 5cm * 5cm * 5mm, of a length 1 m.- 11 units
10 Galvanized Steel Angles Beveled, 5cm * 5cm * 5mm, of a length 1 m.
11 500 Galvanized Steel C channel 120 mm ×55mm, of a length 3 m.- 11 units
12 Galvanized Steel C channel 100 mm ×50mm, of a length 3 m.- 2900 units
13 Galvanized Steel Angles, 10cm * 10cm * 10mm, of a length 2.2 m cross arm (F) left.- 1850 units
14 Galvanized Steel Angles, 10cm * 10cm *10mm, of a length 2.2 m cross arm (F) right.- 1850 units
15. Galvanized Steel Angles, 5cm * 5cm * 5mm, of a length 6 m.- 1320 units

Quantity Required : MOQ

Shipping Terms : CFR

Destination Port : Aqaba, Jordan

Payment Terms : L/C

Looking for suppliers from : Worldwide

Contact : Said Alkam