Please click here to check who's online and chat with them.
Wanted : Stay Wires
Buyer
From Jordan
ARCHIVED
Destination:
Aqaba Port,
Jordan
Date:
Apr 21, 2021
Target Price:
Negotiable
Quantity Required:
115
kilometers
Payment Terms:
100 % by irrevocable L/C as per IDECO payment terms
Shipping Terms:
CFR
Looking for suppliers from:
Worldwide
Product Description:
The buyer is interested to receive quotations for the following RFQ -
Product Name: Stay Wires
Specifications:
- 65 kN Stay Wires lengths on each drum shall be 200 Meters and all drums shall contain only one length
- 130 kN Stay Wires lengths on each drum shall be 100 Meters and all drums shall contain only one length
This buylead is archived. Your inquiry will be sent directly to the buyer's email inbox, and they may respond at their discretion. However, you will not receive their contact details.
Specifications:
stranded steel wires
Stay wires shall be stranded steel wires, manufactured to BS 183, galvanized to BSI BS EN ISO 1461 with a minimum mean coating thickness of 2.83µm, or related IEC or other standards.
With a minimum breaking load of 60 K Newton. Stay wires shall be high tensile hot-dip galvanized with a diameter of 12mm (4mmx7). They shall be easy to bend and erect (not hard).
The outermost layer of stay wire shall be stranded with the right-hand lay.
All Stay wires shall be supplied on robust drums of approved materials and construction suitable to withstand
very rough transport and handling and to enable conductors or cables to be pulled out smoothly.
Drums shall be non-returnable and, if made from timber, shall be pressure–impregnated against fungal and insect attacks.
Wooden drums shall be lagged with closely fitting battens in accordance with standards as may be approved.
Battens shall be firmly secured to the drum flanges and finally, steel banded under tension close to each flange
using steel tape not less than 25 mm wide and 2mm thick and stapled to at least every third batten.
Drum spindle holes shall be reinforced by steel plates.
INSPECTION AND TESTING
• Test at Manufacturer’s Works.
• Galvanizing- Test.
Stay wire supplied shall be easily cut by a hacksaw and easily bent through 180 by hand since bulldog clamps are to be used for fixing stay wires after bending
Specifications :
Stay Wires, Barbed Wires, H.B wire
Galvanized Wires Size Range From 4mm To 2mm
Stay Wires Size 7*8 And 7*10
Barbed Wires 12*12, 14* 14
H B Wire Size 5.50mm To 2mm
The buyer is interested to receive quotations for the following RFQ -
Product Name: Galvanized Steel Preformed Guy Grips And Bull Dog Clamps
Specifications:
- Galvanized steel preformed stay grips of diameter range (11.8-12.2) mm suitable for attaching (7/4.0) mm steel strand stay wire to stay insulator, minimum rated holding strength (9,500) kgf, 0.8-meter overall length, right hand lay direction, and cross over starting at (140) mm. the preformed shall be hot-dipped galvanized to BS en 10244-2:2001 or latest equivalent approved standard.
- The number of grip strands shall not less than five strands.
- 4. Bull Dog Clamps:
- Bull Dog Clamp 130 K.N 7/8 inch U bolts According to ISO 898-1: 2009 grade 8.8 and Nuts dip galvanized the nuts shall be finger tight. the clamp shall be provided with a plain and spring washer.
- The base of the clamp shall be of malleable iron and dip galvanized to ISO 1461-2009, and the U bolts and nuts shall be of mild steel and dip galvanized in accordance with the above-mentioned standards.
- The mechanical properties of bolts, nuts, plain, spring washer, and clamp shall be as ISO 898-1 (2009)
Quantity Required: Galvanized Steel Preformed Guy Grips, QTY = 40000 And Bull Dog Clamps 130 K.N 7/8 inch. Qty = 13000
