Please provide a quotation to the following requirement from importer -
Product Name - Pig Iron
Specifications :-
Type - Nodular Pig Iron
Severe rust and slag inclusions are not allowed. The weight of goods less than 2 kg shall not exceed 2% of the total weight. Non-metallic dust/impurities shall not exceed 0.5% of the total weight of the goods. When quoting, please indicate the size, chemical composition and origin of the pig iron, and attach photos or videos of the pig iron.
Quantity - 20,000 MT
Please provide a quotation to the following requirement from importer -
Product : Aluminium Oxide
Specifications:
Spec : Aluminum Oxide (Alumina) powder of large-sized particle beads of 2-5mm with a pore volume of >0.5 cm3/g.
Form : Powder
Qty : 1 Ton
Please provide a quotation to the following requirement from importer -
Product Name: Refractories Material For Furnace Lining
Specifications :-
Powder with different Grain Sizes acc. to the Furnace Size and Melting Temperature
The main Elements of that Powder either a Quartz
( Fine Grade of Silica Oxide SiO2 )
or Alumina ( Aluminum Oxide Al2O3 )
depending on the Required Scrap to be Molten
27 MT Furnace Lining: SiO2: =97.5%; Al2O3: =0.8%; other requirements: Fe2O3 =0.2%; Magnetic material =0.02%; Moisture =0.5%; Density: =1.95g/cm3; Maximum operating temperature: 1650; Particle size: 0-20mm 10 MT Kneading Material (Stamp Mass): Al2O3 More Than 40%; Particle Size 0-10mm; Refractoriness More Than 1650 °C 10 MT Ramming Mix (Refractory Material, for Nodularizing Ladle Lining): SiC: 3-8%, SiO2 = 10%; Al2O3: 50-60%; Refractoriness not less than 1650 °C 20 MT Spheroidizing Ladle Castable : Al2O3=65%; SiO2=15%; Fe2O3=1.5%,;Bulk Density=2.5 Ton/M3; compressive strength=50Mpa; Good Wear Resistance; Coefficient of Friction=0.4; Refractoriness:1600 °C
Quantity - as mentioned above
Please provide a quotation to the following requirement from importer -
Product : White Aluminum Oxide
Specifications:
white aluminum oxide (alumina) of 2-5mm particles. Additional parameters include:
Surface Area: 280 m²/g
Pore volume: 0.6 cm³/g.
Al2O3 content: 90%
Static Water adsorption: More Than 17
Crushing strength: More Than 110 N/P
Our alumina will primarily be used for catalyst support and adsorption processes applications. Kindly confirm if you can supply this to us. Also confirm if you can do customization of the alumina to different specifications.
Quantity: 1 mt
Buyer is interested to receive quotations for the following RFQ -
Product Name: Hematite Iron Ore
Specifications :
Purity: Minimum 62% And Maximum 65-66%
Payment Non Transferable DLC And 3rd Party Inspection Is A Must Before Opening The LC And After Sending The Verbiage
Payment Terms:
By irrevocable, non-transferable, Documentary Letter of Credit (DL/C), issued by Bank, payable 100% at sight against documents for the value of each shipment and satisfactory inspection upon delivery.
Payment Terms : By irrevocable, non-transferable, Documentary Letter of Credit (DL/C), issued by Bank, payable 100% at sight against documents for the value of each shipment and satisfactory inspection upon delivery.
