Please provide a quotation to the following requirement from importer -
Product : Aluminium Oxide
Specifications:
Spec : Aluminum Oxide (Alumina) powder of large-sized particle beads of 2-5mm with a pore volume of >0.5 cm3/g.
Form : Powder
Qty : 1 Ton
Please quote for the following wholesale product requirement -
Product Name: Calcium Carbonate
Specifications:
for paint industry
-5 micron D97 -20 micron D97
product needs to meet the following criteria: Physical properties Whiteness (RY) 98 Yellow index 2.2 Max Refractive index % 1.59 Oil absorption (787/S) 22.5:0.5 gm/100gm DO absorption (787/5) 35.5:0.5gm/100gm PH value (787/9) 9 Max Loose bulk density 0.44:0.05gm/cm3 Hardness in Mohs* 3 Moisture 0.2% max Chemical analysis (%) CaCO3 99.6 CaO 55.64 MgO 0.15 Fe3O2 0.001 Al2O3 0.001 SiO2 0.001-0.03 L.O.I 43.95
Please provide a quotation to the following requirement from importer -
Product Name : Di Calcium Phosphate
Specifications :
-Humidity shall not exceed 7%
-Calcium shall not exceed 23%
-Fluorine shall not exceed 0.18%
-Phosphate shall not exceed 18%
Wants certificate analysis to be shared buy suppliers
Please provide a quotation to the following requirement from importer -
Product Name: Refractories Material For Furnace Lining
Specifications :-
Powder with different Grain Sizes acc. to the Furnace Size and Melting Temperature
The main Elements of that Powder either a Quartz
( Fine Grade of Silica Oxide SiO2 )
or Alumina ( Aluminum Oxide Al2O3 )
depending on the Required Scrap to be Molten
27 MT Furnace Lining: SiO2: =97.5%; Al2O3: =0.8%; other requirements: Fe2O3 =0.2%; Magnetic material =0.02%; Moisture =0.5%; Density: =1.95g/cm3; Maximum operating temperature: 1650; Particle size: 0-20mm 10 MT Kneading Material (Stamp Mass): Al2O3 More Than 40%; Particle Size 0-10mm; Refractoriness More Than 1650 °C 10 MT Ramming Mix (Refractory Material, for Nodularizing Ladle Lining): SiC: 3-8%, SiO2 = 10%; Al2O3: 50-60%; Refractoriness not less than 1650 °C 20 MT Spheroidizing Ladle Castable : Al2O3=65%; SiO2=15%; Fe2O3=1.5%,;Bulk Density=2.5 Ton/M3; compressive strength=50Mpa; Good Wear Resistance; Coefficient of Friction=0.4; Refractoriness:1600 °C
Quantity - as mentioned above
Please provide a quotation to the following requirement from importer -
Product Name: Calcium Hypochlorite Ca(ClO)2
Specifications:
1 Powder Chorine 70 Granular Calcium Hypochlorite Ca(ClO)2 - 65%
2 Powder Chorine 90 Granular Calcium Hypochlorite Ca(ClO)2 -90%
3 Pool pH Minus For pH adjustment, (Sodium Bisulphate Powder)
4 Pool pH Plus For pH adjustment, (Na2CO3)
5 Pool Flocculant Hydrated Aluminium Sulfate (Poly Aluminium Chloride - PAC)
6 Pool Magic Plus For sparkling Clear pool water,kills algea and rapid pool clarifier
7 Pool Algicure Effective Algicide,kills black and green algea
Qty: Initially 1 container trial later 5 containers
Please provide a quotation to the following requirement from importer -
Product : White Aluminum Oxide
Specifications:
white aluminum oxide (alumina) of 2-5mm particles. Additional parameters include:
Surface Area: 280 m²/g
Pore volume: 0.6 cm³/g.
Al2O3 content: 90%
Static Water adsorption: More Than 17
Crushing strength: More Than 110 N/P
Our alumina will primarily be used for catalyst support and adsorption processes applications. Kindly confirm if you can supply this to us. Also confirm if you can do customization of the alumina to different specifications.
Quantity: 1 mt
Specifications:
Category: Oxide
We Require Hydrophobic Fumed Silica For Manufacturing High-viscosity thixotropic blood collection tube separation gel.
Application
Main rheology builder for:
- thixotropy
- anti-flow at rest
- shear thinning under centrifugation
- barrier recovery
Required Specifications
- Type: hydrophobic treated fumed silica
- BET surface area: 100–250 m²/g
- Moisture: Less Than 1%
- Loss on drying: low
- Recommended for oil-based gel systems
- Excellent dispersion in white oil / PIB
- No hard agglomeration
- Stable at 45°C aging
- High transparency in oil gel preferred
Important
Please recommend the best grade for:
«blood collection tube serum separation gel»
Please provide:
- sample
- COA
- TDS
- recommended loading %
- dispersing guide
