We supply Co-rotating parallel twin screws extruder for PA/PBT/PC compounding with flame retardants and up to 30% chipped/long Glass Fiber, PC/ABS alloy, PP/PA alloy, PC/PB alloy, ABS color masterbatch.
Salient Features of co-rotating twin screw extruder SAT52:
1) Main motor 90kw, L/D=40
2) One venting port and one vacuum port
3) Screw rpm: 60-600rpm
4) The output capacity: 300~400kg/h
5) One mixer, one main feeder and one side feeder
6) One soft water cooling system and one vacuum system
7) Strand cutting unit with water bath, air blower, pelletizier and classifier
8) One control panel.
Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)
1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;
2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.
Every lot of production need to do testing .
3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.
4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500
5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
This company produces the SJZS series cone-shape double screw rodplastic extruding machine, has forces to squeeze out, high grade, thecompatibility broad, the life long, the shear rate small, the materialis not easy to decompose, to mix builds up the plasticizing to be good, the powder material directly takes shape and so on the characteristic, provides the direct current velocity modulation, the temperature automatic control, installment and so on vacuum exhaust. Is suitable to product the and so on tube, board, different shapematerial production.
Aluminum extrusion profile, plastic products factory, we are a manufacturer specializing in the production of supermarket hardware tools also make molds, plastic injection processing. extruded aluminum products is our conventional extrusion material including aluminium windows and aluminum doors, doors, door hinges, door locks, door hardware, extrusion processing of aluminum alloy profiles;and high precision processing of aluminum alloy extrusion products..Import and export
PC-GF 20% regrind black color - Origin Japan has been processed into plastic particles, which are very convenient for transportation as well as in the recycling process to create new products. We always provide the same products as reality, and we use 100% real images.
Technical applications
If you do not know what common applications of PC plastic are, in addition to the use of food containers, drinking cups, bottles or travel suitcases, PC plastic is also used in engineering fields such as making dashboards. control and system of pipes or cardboard for writing liner, bulletproof glass, spare parts for slide show equipment. However, with technical application, PC plastic has certain disadvantages with low durability, so it is only suitable as accessories.
MATERIAL: PC-GF 20% regrind black color
CATEGORY: PC-GF 20%
TYPE: regrind
GRADE: black color
SPECIFICATION: From sheet and It's a part of an electrical appliance
Origin: Japan
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 600$ - 900$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
5129 Twin Screw Extruder For Engineering Alloy And Gf Suppliers
Short on time? Let Twin Screw Extruder For Engineering Alloy And Gf sellers contact you.
1. Improves nylon water absorption and improves size stability of the product.
2. Improved nylon fire resistance to meet the requirements of electronics, electrical, communications and other industries.
3. Improved mechanical strength of nylon to achieve the strength of metal materials, metal replacement.
4. Improves nylon low-temperature resistance and enhanced resistance to environmental stress.
5. Improves nylon wear resistance to meet high wear resistance requirements.
6. Improves nylon antistatic properties to meet its extraction requirements and mechanical applications.
7. Improves nylon heat resistance to adapt to high temperature conditions such as car engines.
8. Reduce nylon cost and improve product competitiveness.
Through the above modification, high performance and functionalization of nylon composite materials are realized, thereby promoting the development of industries involving high performance and high quality.
MATERIAL: PA66 GF regrind black color
CATEGORY: PA66 GF
TYPE: Regrind
GRADE: Black color
SPECIFICATION: GF50. 1 full container available
Origin: Tunisia
LOADING WEIGHT: 23 Ton
FOB (USD/Ton): 850$ - 1050$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
We set-out to improve the quality and efficiencies of the home and apartment finishing process Delivering a higher quality finished product More cost effective than traditional methods Significantly faster, simpler and safer installation process Easy installation of pre-finished and pre-assembled door units Achieve an eco-friendly product made from recycled materials Built-in design tolerances to mitigate the necessity for accuracy Reduction in on-site labour - finishing, painting and tiling Elimination of finishing defects 100% termite resistant finishing material 100% Waterproof We achieved it!
The Inter-Join finishing system eliminates all of the quality & labour issues associated with the traditional finishing process
Eliminates: Skilled labour associated with hanging doors
Eliminates: Skilled labour associated with butt hinges recessed into doors and jambs
Eliminates: Labour associated with fitting locks
Eliminates: Mitre cuts required for skirting and architraves
Eliminates: Gap filling sealant around skirting and architraves
Eliminates: Cut-in painting around skirting/walls and architraves
Eliminates: Intricate tile cutting of floor tiles and addition of sealant around door jambs
Eliminates: Trimming door jamb & window reveals
Resulting in increased productivity & cost savings
THE INTER-JOIN DIFFERENCE
DELIVERING A HIGHER QUALITY FINISHED PRODUCT
SIGNIFICANTLY FASTER, SIMPLER AND SAFER INSTALLATION PROCESS
MORE COST EFFECTIVE THAN TRADITIONAL METHODS INSTALLATION READY, PRE-FINISHED, AND PRE-ASSEMBLED DOOR UNITS
ECO-FRIENDLY PRODUCT MADE FROM RECYCLED MATERIALS
BUILT-IN DESIGN TOLERANCES THAT MITIGATE THE NECESSITY FOR ACCURACY
REDUCTION IN ON-SITE LABOUR - FINISHING, PAINTING AND TILING
ELIMINATION OF FINISHING DEFECTS
MATERIALS ARE 100% TERMITE RESISTANT
MATERIALS ARE WATERPROOF
DOORS, SKIRTING AND ARCHITRAVES ARE FILM WRAPPED FOR PROTECTION
All Door Units are pre-finished, assembled and ready for immediate installation
Residential door manufactured from completely waterproof composite (WPC & Wooden) material
Residential doors are available in varying styles and designs
Commercial doors manufactured to precision from high quality Aluminium Composite Panels, entirely processed on our patented, computer operated door machine
