Function: 1. Digital displaying of temperature, humidity 2. Full automatic temperature controlling 3. Full automatic humidity controlling 4. Full automatically turning 5. Full automatically alarming 6.Full automatically ventilator 7. Back emergency system
Main Technical Index: 1. Temperature display range: 0 ~ 99.9â?? 2. Temperature measurement accuracy: �± 0.1â?? 3. Humidity display range: 0-99% RH 4. Humidity control accuracy: �± 3% RH
5. Output path: 7 Road ( over-temperature, temperature control, insufficient temperature, egg-left turning, egg right-turning, humidity control, alarm ) 6. The maximum output load current: temperature control, insufficient temperature less = 8A/AC 220V, over-temperature,egg-left turning, egg right-turning, humidity control, alarm less = 1A /AC 220V 7. Number of egg-turning : Maximum record 999 times.
8. Cycle of egg-turning: from 0 to 999 minutes (factory set at 90 minutes) 9. Turn the eggs time: 0 to 999 seconds (factory set at 180 seconds) 10. Ventilation cycle : 0-999 minutes (factory set at 120 minutes) 11. Ventilation time: 0-999 seconds (Factory set at 30 seconds) 12. The measuring line length: 1.5 meters
Working conditions: 1. Power Supply: AC 160V ~ 240V, 50Hz or AC 110V ( choose the one you need ) 2. Relative humidity: less than 85% 3. Ambient temperature: -10 ~ 60â??Digital display of temperature, humidity
Fully automatic temperature controlling
Fully automatic humidity controlling
Automatic turning
XM452 Temperature Humidity Controller for Incubator With Indicators Thermometer Hygrometer Automatic
XM452 Temperature Humidity Controller for Incubator With Indicators Thermometer Hygrometer Automaticpower supply :DC 12V Temperature measurement range:- 40~120? Humidity range?0~100%RH Control precision?0.1? 0.1% RH Test probe?Integrated sensor output:10A delay Size:65*55*28mm
temperature control: 1. Set the temperature + ?Normal display mode, long press the + key for 3 seconds, start temperature numerical flashing, press the + / - key setting values, wrong operation after 5 seconds, automatically return to detect temperature display 2. Set the temperature ?- Normal display mode, long press - button for 3 seconds, stop numerical flashing temperature, press the + / - key set value 3. Restore the factory Settings:- At the same time long press temperature, and humidity
Set the start temperature:Long press the + key, start the flashing temperature, set start temperature by + / - key set Stop temperature:- long press - button, stop flashing temperature, set stop temperature by + / - key
Humidity Settings: Set to start humidity: long-press the + key, start the humidity value flashing, set by + / - key launch humidity value Set stop humidity:- long press - to stop humidity value, set by + / - key to stopping the humidity value Fault code:- display LLL means the sensor fault display HHH mean Test temperature exceeds the range of measurement
Temperature Humidity Controller XM452
power supply: DC 12V Temperature measurement range:- 40~120? Humidity range?0~100%RH Control precision?0.1? 0.1% RH Test probe?Integrated sensor output:10A delay Size:65*55*28mm
temperature control: 1. Set the temperature + ?Normal display mode, long-press the + key for 3 seconds, start temperature numerical flashing, press the + / - key setting values, wrong operation after 5 seconds, automatically return to detect temperature display 2. Set the temperature ?- Normal display mode, long press - button for 3 seconds, stop numerical flashing temperature, press the + / - key set value 3. Restore the factory
Settings:- At the same time long press temperature, and humidity
Set the start temperature:Long press the + key, start the flashing temperature, set start temperature by + / - key set Stop temperature:- long press - button, stop flashing temperature, set stop temperature by + / - key
Humidity Settings: Set to start humidity: long-press the + key, start the humidity value flashing, set by + / - key launch humidity value Set stop humidity:- long press - to stop humidity value, set by + / - key to stopping the humidity value Fault code:- display LLL mean the sensor fault display HHH mean Test temperature exceeds the range of measurement
1 RFT8100 wireless temperature and humidity detection system
is composed by wireless temperature detection probes, humidity detection probes and display terminals. Adopting the advanced wireless temperature detection technology, RFT8100 transmits and displays the real time value detected from the local detection probes for the purpose of inspecting temperature and humidity on-site routinely. The alarm relay sends out signal when the temperature and humidity data exceeds or lowers the setting alarm value, and the alarm points can be found quickly by checking the alarm information. RFT8100 also provides curve diagram for checking temperature and humidity variation in short period for equipments management purpose. RFT8100 can achieve the remote monitoring function by transmitting the measured data to DCS monitor centre or equipments management centre thru RS-485 port or Ethernet port.
Humidification (heating)/dehumidification (cooling) output
Switching display of temperature and humidity
High/low limit alarm
Sensor calibration
Sensor error detection and on/off output control
Minimum on/off duration time
Scope
Standards: gb/t 2361 and astm d1748
It is widely used in pharmaceutical, textile, food processing, bio-engineering experiments and industrial products of the temperature and humidity testing.
Features
1. Mirror stainless steel liner, surrounded is designed and made as per semicircular easy to clean, inside adjustable shelf spacing;
2. The use of double doors, insulation performance is good. Interior doors is use full glass door, open the outer door, observing the situation does not affect the internal temperature inside;
3. High-precision, high-capacity humidity generator. Ensure humidity control occurs, high precision, small fluctuations;
4. The original french “taikang” closed compressor, configure delay start. High and low pressure multiple protection.
Technical parameters
1. Dimensions: mm (depth × width × height) in order to prevail in kind
2. Room size: 400 × 400 × 500mm (depth × width × height)
3. Measuring range: 10 °c~ 85 °c (determined according to customer requirements)
4. The temperature fluctuation: ± 1 °c (no load)
5. The temperature uniformity: ± 2 °c (no load)
6. Humidity control range: 40 ~ 95% rh (no load)
7. Heating method rate: 3 ~ 4 °c/ min (no load)
8. Humidity fluctuation: ± 5% rh
9. The noise (db): 65
10. Power supply: 220v ± 10%, 50hz ± 1 ground wire, protective earth resistance of less than 4o
11. The total power: 1.8kw
BJ-S series Intelligent temperature and humidity controller with completed FUZZY algorithm provides very precise of temperature and humidity monitor. FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows temperature and humidity curve by automatically.
Display unit can show environment humidity as per configure by user. The user also can adjust environment condition very easily.
Accept customerized control logic modify details please contact our sales team.
FEATURES
Digital thermostat with 2 control port for fan & heater
3 digital or 4 digital LED screen for temperature and humidity value
B series temperature and humidity controller with completed FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows temperature curve by automatically. And have an independent humidity input can monitor the environment RH and output control signal. User can adjust temperature value very easily to use dial and a LED indicator to show the relay.
FEATURES
Electromechanical thermostat, max with 2 control port for fan & heater
Pioneer in the technology of GSM sms alarm devices, legato possesses a team of expertise in engineering and programming of communication controllers.
GSM sms alarm messenger has been a success worldwide during the past few years. It is widely installed in control and alarm systems for industrial monitoring, power plant, water supply network, geographical control and security.
Temperature & humidity sms alert controller is dedicatedly developed for environmental monitoring and control. It sends sms alarm when temperature or humidity is higher/lower than user preset levels. More importantly, it provides the on/off control of equipments e.g. Air ventilation for maintenance in temperature/humidity range.
Application is unlimited where temperature and humidity needs to be monitored on site and remotely.
Enerna IoTech Cellular 4G LTE IoT RTU Temperature Humidity Alarm Controller. It can Be controlled by SMS mode or 4G Data Network Mode. the 4G switch Controller support wide applications, such as access control system, Pump motor controlling, smart light fan switch, generation room monitor Control
Enerna IoTech Cellular 4G LTE IoT RTU Temperature Humidity Alarm Controller Temperature & Humidity Control function: If the Temperature(humidity) is less than (more than ) the tempeareture (humidity ) you set, the device will switch on/off automatically as you Required. for example: If you need the device to work automatically when the device less than ( more than ) a certain temperature /humidity, you Can use this function.
1. Remote Control, no distance limitation
2. Dial Control first relay, SMS control 4 relays
3. 4G Data network Remote Control Via App
4. with 4 relay output (10A/30VDC, 10A/250VAC)
5. Support Temperature/Humidity Control
6. Scheduled/Timing Control
7. Industrial class design, Aluminum alloy material
Packing List:
1* Enerna IoTech Cellular 4G LTE IoT RTU Temperature Humidity Alarm Controller
1* User Manual
Intelligent temperature & humidity controller with
completed FUZZY algorithm provides very precise
of temperature monitor. FUZZY algorithm control
fan or heater to maintain sensible & latent capacity
follows temperature/humidity curve by
automatically.
Display unit can show environment temperature
and humidity as per configure by user. The user
also can adjust environment condition very easily.
Function & Feature
·DIN(48X48mm) Controller
·Indication and control accuracy 0.1, high measurement
·Heat/Cool control and PID control mode
·All settings except time maintained permanently in non-volatile memory until changed by user
·Built-in digital filter reduce interfere
·Self calibration technology, keep stabilization
·LED display show the data, prevent dazzle, highly visible display
·Simple 4-Button user interface
·Switching power supply and low consumption.
·Use large capacity relay
Black Pepper Oleoresin
Botanical: Piper nigrum
Family: N.O. Piperaceae
Hindi Name: Gol Mirch
General Description: The best Pepper of commerce comes from Malabar. Pepper is mentioned by Roman writers in the fifth century. The plant can attain a height of 20 or more feet, but for commercial purposes it is restricted to 12 feet. The plant is propagated by cuttings and grown at the base of trees with a rough, prickly bark to support them. Between three or four years after planting they commence fruiting and their productiveness ends about the fifteenth year. The berries are collected as soon as they turn red and before they are quite ripe; they are then dried in the sun.
Geographical Sources: Black pepper is native to Malabar, a region in the Western Coast of South India; part of the union state Kerala. It is also grown in Malaysia and Indonesia since about that time when it was found in the Malabar Coast. In the last decades of the 20th century, pepper production increased dramatically as new plantations were founded in Thailand, Vietnam, China and Sri Lanka. The most important producers are India and Indonesia, which together account for about 50% of the whole production volume
History/Region of Origin: In South India wild, and in Cochin-China; also cultivated in East and West Indies, Malay Peninsula, Malay Archipelago, Siam, Malabar, etc.
Varieties -> in trade, the pepper grades are identified by their origin. In India -> The most important Indian grades are Malabar and Tellicherry (Thalassery). The Malabar grade is regular black pepper with a slightly greenish hue, while Tellicherry is a special product. Both Indian black peppers, but especially the Telicherry grade, are very aromatic and pungent. In the past, Malabar pepper was also traded under names like Goa or Aleppi. Cochin is the pepper trade center in India.
In South East Asia, the most reputated proveniences for black pepper are Sarawak in Malaysia and Lampong from Sumatra/Indonesia. Both produce small-fruited black pepper that takes on a greyish colour during storage; both have a less-developed aroma, but Lampong pepper is pretty hot. Sarawak pepper is mild and often described fruity.
Description: Oleoresin Black Pepper is the natural extract of dried tender berries of Piper Nigrum Linn of family Piperaceae.
Manufacturing Process: It is obtained by the solvent extraction of Black Pepper and the solvent traces are removed by distilling it in vacua at controlled temperature.
Physical Appearance: It is a yellowish brown viscous liquid with pungent slightly biting aroma of Black Pepper.
Commodity:Sodium persulfate
Molecular Formula : Na2S2O8
Molecular weight : 238.13
Description
Sodium persulfate is a white,crystalline,odourless salt.It is used as initiator for the Polymerization of monomers and as a strong oxidizing agent in many applications.It has the particular advantage of being almost non - hygroscopic,of having a particularly good storage stability as a result of its extremely high purity and of being easy and safe to handle.
Transportation
Road/Rail transport : GGVS,GGVE,ADR,RID/CLASS 5.1 Sea transport : GGV Sea/IMDG code : CLASS 5.1 Page 5185,UN no.1505
Water hazards class 1(slight water hazard)
All information is given in good faith,but without warranty,since the conditions of use are outside our control. Verification by the user is recommended.Freedom from patent restriction cannot be assumed.
Package
(1) In 25kgs net multiple paper bags with one PE bag inner
(2) In 25kgs net PE bags
(3) In 25kgs net woven bags with two PE bags inner
(4) In 1000kgs net big woven bags with one PE bag inner
The above package is also with a pallet 1000kgs each.
Storage
NPS(SPS) is not combustible but assists combustion materials due to release of oxygen.Provided it is stored under appropriate condition.It must be stored dry in closed containers and protected from direct sunlight,heat and humidity.Impurities such as dirt,rust or traces of metal and reductants may cause catalytic decomposition.The product as supplied or in solution needs to be handled with appropriate care.The eye,skin and clothes must be protected when working with NPS(SPS) as damp powder or aqueous solution has a bleaching and slightly corroding effect.
Application
Polymerization : Initiator for the emulsion or solution Polymerization of acrylic monomers,vinyl acetate,vinyl chloride etc.and for the emulsion co-polymerization of styrene,acrylonitrile,butadiene etc.
Metal treatment : Treatment of metal surfaces(e.g. in the manufacture of semiconductors;
cleaning and etching of printed circuits),activation of copper and aluminium surfaces.
Cosmetics : Essential component of bleaching formulations.
Paper : modification of starch,repulping of wet - strength paper.
Textile : Desizing agent and bleach activator - particularly for cold bleaching.(i.e.bleaching of Jeans).
Others :
- Chemical synthesis
- Water treatment(decontamination)
- Waste gas treatment,oxidative degradation of harmful substances(e.g.Hg)
- Disinfectant
ITEMS SPECIFICATIONS
Appearance white crystalline salt
Assay 99.0% w/w min
Active oxygen 6.65% w/w min
Chloride and chlorate(as CL) 0.005% w/w max
Ammonia (NH4) 0.05% w/w max
Manganese(Mn) 0.0001% w/w max
Iron(Fe) 0.001% w/w max
Heavy metals(as Pb) 0.001% w/w max
Moisture 0.05% w/w max
Decomposition of the product as supplied at above 65C
Recommended storage temperature Normal Temperature
Storage stability as from date of delivery 12 months
We offer stand-alone Environmental monitoring appliance that provides dynamic, real-time temperature monitoring, humidity monitoring for server room, Datacentre and computer rooms or any critical environment. It has following features:
1) Real time monitoring of Humidity and Temperature.
2) Includes dry contact for alarms from critical equipment include power monitoring, water sensors, smoke and fire alarms, motion detectors, airflow, and access/entry sensors.
3) Permits remote monitoring of temperature, humidity and digital dry contact.
4) Notification of alarms via email, SMS, SNMP traps when specified temperature and humidity thresholds or the change of status of a digital dry contact signal
5) Simple integration to a Building Management System (BMS).
6) Capable of Modbus over TCP/IP. Built-in Web server.
7) Option of additional humidity & Temperature sensor.
8) Datacenter & Server room Environment monitoring & control.
We also offer Facility Monitoring system (FMS) equipment which extreme versatility that simplifies and consolidates monitoring of numerous types of signals and equipment available at facilities. These equipments can be UPS, water leak detection, Close control unit (CCU), access control or any equipment that has dry contact etc. Environmental monitoring, humidity monitoring, temperature monitoring, humidity & temperature monitoring, datacenter, server room, server room, rle, enviromux, nti, liebert, APC, netboltz, Aqualeak, SecurityProbe, openxtra, server room monitoring
1. General mhtc1a humidity and temperature sensor module is designed base capacitive humiture sensor by ningbo junrong electron. This product utilizes humidity sensor capacitor and temperature sensor (lm35, america), with characteristics of stable, high accuracy, quick response, good crossing-over and it also use craftwork of smd, and so own extremely small body, stable and reliably performance. The quality guarantee time is 12 months.
2. Application electron, pharmaceutical industry, food processing, warehouses, tobacco, textile, weather, libraries and museum.
3. Shape model encapsulation shape mhtc1a humidity and temperature sensor module without shell detail to the picture
4. Model there are three models according to with or without temperature and humidity sensor. Mhc1a humidity measuring module, without temperature element mhtc1a1 temperature and humidity measuring module, with ntc resistance mhtc1a2 temperature and humidity measuring module, with lm35 temperature sensor
5. Specification
(1) power supply (vin) dc 5vf+5%
(2) electrical current 2ma (max 5ma)
(3) temperature operating range 0 ~ 70fª
(4) humidity operating range 0 ~ 100%rh (dew point)
(5) humidity measuring range 2 ~ 99%rh
(6) temperature storing range -20 ~ 85fª
(7) humidity storing range under 95%rh (no dew point)
(8) humidity measuring accuracy mhtc1a f+3%rh ( at 25fª, 60%rh )
(1) power supply (vin) dc 5vf+5%
(2) electrical current 1.9ma (max 5ma)
(3) temperature operating range 0 ~ 50fª
(4) humidity operating range under 95%rh
(5) humidity measuring range 30 ~ 90%rh
(6) temperature storing range 0 ~ 70fª
(7) humidity storing range lower 95%rh
(8) humidity measuring accuracy f+5%rh ( at 25fª, 60%rh vin=5.0v 1.65`1.95v )
(9) typical humidity data responding to output
Humidity and temperature sensor
Capacitance from 150 to 270 pf
At 55%rh
Sensitivity : 0.2 % by %rh
Response time 0.3 s
Rtsolution 0.05 pf
Accuracy-interchangeability :
3 %hr de 3 a 97%hr
Measurement range 0 a 100 %hr
Operating range : -40ªc a +80ªc
Supply voltage max :12v
Not sensible at dc composent
Humidity and temperature sensor transmitter
Digital frequential ouput
Nominal frequency 6.5 khz
Std sensitivity 13 hz/%rh
Response time 0.3 s
Response time with
Optional protection : 20 s
Accurcy-interchangeability :
3 %hr de 3 a 97%rh
Hysttrtsis <1.5%rh
Measurement range 0 a 100 %hr
Operating range : -40ªc a +80ªc
Supply voltage : 4 a 12v
Ouput resistor : 0, 2 k
Output courant : ª2 ma
Thermistance ntc 10 k a 25ªc
Operating range : -40ªc a +80ªc
Courant max : 0.3 ma
8x9x4 mm3
19148 Temperature And Humidity Controller Xm 18 Suppliers
Short on time? Let Temperature And Humidity Controller Xm 18 sellers contact you.
