Sharprazor watermelon/String mills are designed to enlarge the hole,open up windows,mill through collapsed casing,polish liner polished bore,clean up perforation section,,restore casing drift and downsize debris generated during cased hole milling or drilling applications.
Our String mills have a tapered top and bottom to allow upward and downward reaming.it has spiraled blades welded with crushed tungsten carbide,full 360° wrap .
Sharprazor string mils use cutting-edge technology, top experienced engineers in this scope to guarantee the quality.Standard sizes from 3-1/2to 28,and customized specification is available to suit specific operational requirements.
A flour mill may produce a single or multiple grades of finished flour from the milling of a given wheat or wheat mix. These finished flours are prepared by combining various flour streams that are produced at different stages of milling
A flour mill may produce a single or multiple grades of finished flour from the milling of a given wheat or wheat mix. These finished flours are prepared by combining various flour streams that are produced at different stages of milling
A flour mill may produce a single or multiple grades of finished flour from the milling of a given wheat or wheat mix. These finished flours are prepared by combining various flour streams that are produced at different stages of milling
A flour mill may produce a single or multiple grades of finished flour from the milling of a given wheat or wheat mix. These finished flours are prepared by combining various flour streams that are produced at different stages of milling
Vertical flour mill use for home use or small business at home. Our 18 Inch Atta chakki Machine made with CI Casting Body with Standard bearing gives long life and efficient emery stone gives well balance. Our products are 100% Copper winding, energy saving electric motor, hassle free smooth function.
Vertical flour mill use for home use or small business at home. Our 16 Inch Atta chakki Machine made with CI Casting Body with Standard bearing gives long life and efficient emery stone gives well balance. Our products are 100% Copper winding, energy saving electric motor, hassle free smooth function.
Vertical flour mill use for home use or small business at home. Our 14 Inch Atta chakki Machine made with CI Casting Body with Standard bearing gives long life and efficient emery stone gives well balance. Our products are 100% Copper winding, energy saving electric motor, hassle free smooth function.
Vertical flour mill use for home use or small business at home. Our 12 Inch Atta chakki Machine made with CI Casting Body with Standard bearing gives long life and efficient emery stone gives well balance. Our products are 100% Copper winding, energy saving electric motor, hassle free smooth function.
Vertical flour mill use for home use or small business at home. Our 10 Inch Atta chakki Machine made with CI Casting Body with Standard bearing gives long life and efficient emery stone gives well balance. Our products are 100% Copper winding, energy saving electric motor, hassle free smooth function.
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills.
It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color.
Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating.
From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list
In particular the mill scale can be classified as follows:
Einecs (european commission no.): 266-007-8
Waste code: 10 02 10
Basel code: b 12 30
Hs code: 2619.00
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
Natural fibers present important advantages such as low density, appropriate stiffness and mechanical properties and high disposability and renewability. Moreover, they are recyclable and biodegradable. There has been lot of research on use of natural fibers in reinforcements.
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm
Chemical Composition
Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.