Gum rosin or refined gum rosin is a kind of natural resin, mainly composed of various kinds of resin acids; it can be dissolved easily in many organic solvents and has special chemical activity. So, it is an important raw material for the production of paper, coatings, inks, rubber, soaps, electronic industrial products, food grade ester gum, rosin ester resins etc.
Gum rosin or refined gum rosin is a kind of natural resin, mainly composed of various kinds of resin acids; it can be dissolved easily in many organic solvents and has special chemical activity. So, it is an important raw material for the production of paper, coatings, inks, rubber, soaps, electronic industrial products, food grade ester gum, rosin ester resins etc.
Rosin is an important chemical raw material, widely used in various industrial sectors, the main use is as follows:
1.Soap industry
Rosin and caustic/soda or cooking together form a rosin soap. Rosin soap has great detergency, soluble in water, can dissolve fat, easy to foam. Rosin sticky, not easy to crack and make soap rancidity deterioration
2.Paper industry
Gum rosin used as a papermaking material in the paper industry.
3.Paint and coatings industry
Rosin soluble in various organic solvents, and the film deposition, shiny, is one of the basic raw material of paint. The role of rosin in the paint is to paint bright color, fast drying, smooth and easy to fall off the film
4.Ink industry
Rosin is mainly used in printing ink vehicle body and enhance the adhesion of the ink to the paper. If you do not have rosin ink, the ink will be printed into the dull hue, blurred
5.Adhesives industrial
Rosin ester and hydrogenated rosin ester as a binder base material, commonly used as hot melt adhesives, pressure sensitive adhesives and rubber tackifier
6.Rubber industry
Rosin used as a softener in the rubber industry, increase its flexibility. Disproportionated rosin potassium soap can be used for synthetic rubber
7.Food industry
Hydrogenated rosin esters and natural chicle, wax, etc. together with the melted, then add spices, sugar and mix thoroughly pigment can be made into gum. After the slaughter of pigs in the slaughterhouse, cattle, sheep, when, after hair removal with mechanical operations, left in the animal body and head hair can be used by the 88-94% of molten rosin and 6-12% of cottonseed oil consisting of depilatory to remove
8.Electrical industry
Rosin 35% and 65% light oil formulated as insulating oil in the cable used as a protective film for insulation and heat effect. Rosin and bakelite and other artificial resins used as the insulating varnish mixed
9.Building materials industry
Rosin in the building materials industry mainly used as a foaming agent and a concrete floor tile adhesive. Rosin is also used as vinyl asbestos tile adhesive. Rosin and linseed oil, calcium carbonate, charcoal, pigments, etc. can be mixed together to manufacture carpet tiles
Rosin is a kind of oil tree rosin in the pine family, the main component is C19H29COOH. Divided into "fat rosin", "wood rosin" and "floating rosin" 3 kinds. It should be used in industry, flux, paper making, string Musical Instruments, etc.
Rosin is sold as a semi-transparent solid ranging in colour from yellow to black and has a faint odour of pine. The commercial grades range from A (the darkest) to K (yellow red), M (yellow brown) and N (deep yellow), through to superior WG ("Window Glass",yellow) and WW ("Water White", slight yellow). Rosin is brittle and easily crumbled at room temperature, but melts at around 100-120 C and is highly flammable.
3518 Rosin Cas 8050 09 7 Suppliers
Short on time? Let Rosin Cas 8050 09 7 sellers contact you.
Rosin is a kind of oil tree rosin in the pine family, the main component is C19H29COOH. Divided into "fat rosin", "wood rosin" and "floating rosin" 3 kinds. It should be used in industry, flux, paper making, string Musical Instruments, etc.
Ester Gum is a glycerol ester of gum rosin with low odor and low acid value, especially applicable to chewing/bubble gum base, beverages and flavors. It is also used as a resin modifier for film formers, elastomers, and waxes, and in various adhesives, inks, and protective coating compositions where minimum odor is a requirement.
Commodity:Avobenzone
CAS No. 70356-09-1
Molecular Formula C20H22O3
Molecular Weigh 310.39
EINEC No. 274-581-6
Specification Quality standard: USP36
Appearance Off-white powder
Assay 95.0-105.0%
Melting range 81.0~86.0
Impurities
Any individual impurity: 3.0%
The sum of all of the impurities: 4.5%
Loss on drying 0.5%
Packaging and storage: 1kg/aluminum foil bag. 25kg/barrel, pharmaceutical packaging barrel. Sealed, stored in dark, with a shelf life of 2 years.
Reference dosage:
The hygiene standards for cosmetics stipulate that the maximum amount added shall not exceed 5%, and the general dosage is 1-4%.
Usage:
Sunscreen agent-1789 is the most effective fat soluble UVA filter and is a safe and effective UVA sunscreen approved by the US FDA for sale on the counter. It can effectively block UVA, thereby increasing the SPF value of sunscreen products. It can improve the efficacy of sunscreen products when used in combination with UVB filters, and BL-200 has the best effect when used in combination with octyl methoxycinnamate. BL-200 can increase its stability in the product. It has an extremely effective protective and repairing effect on human skin.
Application:
This product is soluble in oil and can be formulated into a cream using the usual method. However, the product turns red when it encounters metal ions, so other components such as formula water should not introduce metal ions. The equipment should be made of pure stainless steel, and an appropriate amount of EDTA-2Na should be added to the formula water phase to chelate with metal ions.
We can supply Acetic Acid Industrial Grade and Food Grade.
Commodity:Acetic acid.
Other name: Glacial acetic acid
Molecular formula CH3COOH
CAS:64-19-7
EC No.200-580-7
Introduction:
Annual capacity of our glacial acetic acid is 350,000.the raw material is methanol.we use a new technical process to produce: Methanol decomposition.
the most important characteristic of this way are as following:
mild oder; high quality--can reach 99.99%min; low cost--30% lower than oil decomposition and ethanol decomposition way.
Specifications:
Apha color:<10
Freezing point: 16
Specific gravity:1.04
Acetid acid: 99.8%
Acetaldehyde: 0.004%
Formic acid: 0.06%
Iron: 0.00004%
Non-Volatile Matter: 0.003%
The heavy metal(As Pb counts): 0.00002%
Formula:KAl(SO4)2 12H2O
Relative Molecular Weight:474.39
CAS NO,: 7784-24-9
EINECS No.:5637-689-7
HS CODE.: 2833301000
Appearance: lump, white crystal, white powder
Properties:Colorless, transparent, particle or crystalline powder, odorless, nontoxic, tastes slightly sweet and puckery, astringent, easily soluble in water, its water solution appears acid,is would lose crystal water and become white powder on heating
Usage;
Food industry: Buffering agents and leavening agents in food-grade products.
Chemical Industry: Water Flocculant, aluminum tanning agents and after-treating agents for leather tanning in the leather industry, dyeing agents,Astringents,mordants etc.
Application: It is a kind of basic material for organic synthesis, and can produce acetylene gas for cutting and welding, also be material for calcium cyanamide.
Appearance: Grey, black solid, purple when its purity is more than 90%.
Granule:4-25mm / 15-25mm / 25-50mm / 50-80mm /25-80/ 80-120mm
Package: Net in 100kg or 50kg new iron drums with nitrogen.
Specification: GB10665-2004
Specification Superfine Grade First Grade Second Grade
Gas yield(L/kg)L/kg 305 295-305 285-295
PH3 content in acetylene (PH3%) 0.06 0.08 0.08
H2S content in acetylene (H2S%) 0.1 0.1 0.1
Chemical Name:4-Hydroxybenzoic acid
Trade Name:p-oxybenzoic acid
Molecular Formula:C7H6O3
Molecular Weight:138.12
CAS No.:99-96-7
Properties:white odorless crystalline powder, easily soluble in hot water and alcohols, aethers and acetone,
slightly soluble in cold water and benzene, insoluble in carbon bisulfide; relative density is 1.46
Use: Can be used as antiseptic, intermediate of dyes, pharmaceuticals; as main material of liquid crystal polymers; as material of pesticide intermediate
Specification
Item Specification
Polymer Grade Technical Grade
Appearance white crystal powder white crystal powder
Purity(on dry base) % 99.6 99.0
Melting Point 214-217 212-216
Odor odorless odorless
Solubility Clear and transparent clear and transparent
Loss on Drying % 0.20 0.50
Color(Pt-Co) 10 40
Ash % 0.02 0.15
Sulfate(SO42-) 0.01 0.05
Chloride(Cl-) % 0.005 0.02
Phe% 0.01 0.10
Salicylic Acid % 0.02 0.10
4-Hydroxyisophthalic Acid(HIPA) ppm 500 /
Insolubles in Metha ppm 50 /
Potassium(K+) ppm 5 /
Sodium (Na+) ppm 5 /
Iron (Fe) ppm 5 /
Ca2++Mg2+ppm 5 /
Physical State: Needle-like lustrous and dark purple crystal. It can dissolve in water, and it is a strong oxidant. Melting Point :270 C ,decompound Specific Gravity :2.703 ,Solubility in water :6.4 g/100 mL (20C) ,Stability :Stable under ordinary conditions
Use
Mainly used in medical industry, water treatment, metallurgical industry, chemical industry and food industry.
Quality Standard
Item Standard BP2000
Appearance purple noodle crystal
Purity 99.3% min
Chloride 0.01% max
Sulfate 0.05% max
Insoluble matter in water 0.15% max
Moisture 0.5% max
As 20 ppm max
Cd 50 ppm max
Cr 50 ppm max
Hg 10 ppm max
Pb 50 ppm max
Se 50 ppm max
Ni 50 ppm max
Sb 50 ppm max
Packing and Storage
Packing: 50kg net weight new galvanized drums with P.E. Liner. Stored in a cool, ventilated, dry place.
Solid type: white powder or granules, hygroscopic, readily soluble in water. The aqueous solution may absorb CO2 and form aluminum hydroxide precipitate. Addition of NaOH is required to increase stability.
Liquid type: transparent slurry, stable during storage life. Prolonged stay of diluted aqueous solution may cause aluminum hydroxide precipitate.
Use:
In the construction process, it can be used as leaking stoppage agent combined with the sodium silicate.
In paper-making, this product can mix with aluminum sulfate to be a good filling agent.
In water treatment, it can be used as additive of purifier.
Product Physical Properties
WHITE POWDER CRYSTAL, SPECIFIC GRAVITY IS 1.586, IT CANDISSOLVE IN WATER, BUT CANT DISSOLVE IN ALCOHOL AND ACETINE.
Specifications:
Appearance: white free-flowing crystalline powder without agglomeration
Purity as Ammonium Bicarbonate ,% by weight 99.5 (minimum)
Chloride (as Cl), % by weight 0.20(maximum)
Sulphates (as SO4),% by weight 0.10(maximum)
Iron (as Fe), % by weight 0.004(maximum)
Nonvolatile matter, % by weight 0.10(maximum)
Heavy metals (as Pb), ppm 2.50(maximum)
Copper (as Cu), ppm 5.0(maximum)
Arsenic (as As), ppm 0.6(maximum)
Tarry matter To pass test
Oil Content Less than 10 ppm
Melamine Content NIL
USAGE
BAKING FOODS SUCH AS CRISP CAKE, BISCUIT ETC. IN ADDITION, ITALSO WIDELY USED IN CHEMICAL FIELD SUCH AS FLOUR BRIGHTENING AGENT,RARE EARTH DEEP PROCESSING, MEDICINE MIDBODY, PLASTICS PROCESSING,ELECTRONIC ELEMENT ETC.
PACKING
OUTSIDE IS WEAVE BAG OR PAPER BAG, INSIDE IS FOOD PLASTICSBAG, 25KG/BAG. THE PACKING ALSO CAN ACCORDING TO CONSUMERS REQUEST.
