TTSE Series PN25 ON/OFF Type TTSX Series PN25 Regulating Type Temperature Control Valve
Features and Benefits
Ball valve body, quarter turn.
Screw connection between the valve and actuator.
A.C. synchronous motor, two line type, easy for installation.
Zero leakage when pressure difference 600KPa.
0(2)-10 V or 0(4)-20mA input signal.
Used in AHU system
Applicable Standards
Connection Standard: ISO228
Technical Data
Nominal Diameter:DN25~DN50 (1-2)
Nominal pressure: PN 25
Temperature range: -5~85C
Suitable for: Water and neutral liquid
Voltage: ON/OFF: AC220V 50/60Hz
Regulating: AC 24V 50/60Hz
Power Consumption: ON/OFF: 5VA Regulating: 4VA
Control Signal: ON/OFF: On Off signal Regulating: 0(2)-10V, 0(4)-20mA
Regulating return signal: 0-10V
Running time: DN15~25 45 seconds
DN32~50 60 seconds
Wire connection spec: 0.5~1mm2
Level of protection: IP54
Rose Damascena flower water may be used as face clean toner.
Rose water Improves skin water balance.The contect of Rose oil into Rose water (around 0,06%) acts as a disinfectant and antibacterial ,so Rose water can be used to:
-disinfection in skin irritations, redness, insect bites
It cleanses, tones and gives a youthful appearance to each skin type while preserving the natural hydro-balance in the epidermis. Regular use of rose water in the form of tonic and face cleanser regulates the production of sebum and soothes and regenerates irritated skin.
It has antibacterial action. Applied externally to inflammatory processes, acne, skin redness, eczema and itchy skin. Suitable for baby skin.
-Aromatherapy uses its relaxing and soothing effect by placing it in a aromatherapy bath, in the bath, or spraying through a spray in the room. The fresh scent refreshes the spirit and harmonizes the mind. It has a toning and restoring effect, it brings a sense of romance.
39417 Regulating Type Temperature Control Valve Suppliers
Short on time? Let Regulating Type Temperature Control Valve sellers contact you.
The RTC series of Oil heating adopts heat-exchanging principle,making use of high- heat-conduction oil as medium to keep the mould at a constant temperature during molding, which make sure top quality for molding. The optimized design ensures the heating temperature up to 200íµ.
Features:
1. P.I.D temperature control giving full digital setting and fault display with high accuracy in order to precisely control water temperature with variation of í+1oC, Moreover,direct-view,easy and simple for operation.
2.Equipped with horizontal pump,running in smooth and steady,stable flow with long working life.
3.cylindrical tube design,pressurization and explosion-proof.
4.Automatic alarming function,alarm and stop automatically when the system has a breakdown.
5.Attractive appearance,easily-dismounted design,convenient for maintenance.
6.Two specifications of water and oil cooling for customers' selection.
BRAND : FUJI TEMPERATURE CONTROLLER
PXF9 , PXF4, PXF5, PXF4 SOCKET TYPE ALL SERIES AVAILABLE .
Precise control:
Achieved a processing speed of 50 ms which is 10 times faster than conventional models. Reading accuracy is also improved from �±0.5% to �±0.2%*.
*Comparison under 0â??850�°C range, with RTD. See the Data Sheet for details.
Easy-to-see display
MVA LCD* which offers high contrast and wide viewing angle
Process value is displayed in white
*Minimal translucent type vertical alignment liquid crystal display
Practical options
Simple watt-hour metering function: allows you to monitor energy consumption
Operating days alarm: tells you the appropriate time for maintenance work
Most compact class in industry
36% smaller (than conventional models) and 58-mm depth shallow body helps downsize your facility
Universal input
You can use any input among RTD, thermocouples, voltage, current, and mV. The set-up for input change is very easy, only requires parameter change. This allows reduction of maintenance parts
BRAND: WEST PID TEMPERATURE CONTROLLER
WEST Controller:
Model: WEST-6100+,P6100
Model: WEST-4100+,P4100
Model: WEST-8100+,P8100
Features and Benefits:
Dual setpoints & optional remote selection
Plug-in output modules allow installing just the functions needed in
Expanded user-selectable operator modes in
User-selectable plug-and-play output cards in
Process and loop alarms in
Adjustable hysteresis in
Optional 10V SSR driver in
Improved Windows PC configuration software
Improved easy-to-use HMI
Jumperless input configuration
Auto-hardware recognition
Faster communication speeds
More security options
Backward compatible panel cutout, housing and terminal wiring capability
P6100/P6170/P8100/P4100
Model FZK8810A QY-EWQ-01
Measurement Method Non-contact type
Power Supply Prompt for low battery charge DC 3V(2 AAA batteries)
Measuring Range 32-42.5 33~43.0
Electricity Prompt Prompt for low battery charge
Measure Distance 1cm-15cm 3~5cm
Fever Alarm Abnormal body temperature alarm 5 beeps in case of the
temperature is higher 38
Measuring Time Measurement time:0.6 second
Maximum Error ±0.2 0.2~0.3
Display Unit Centigrade()
Display Resolution 0.1 0.2~0.3
Automatic Shutdown 15 seconds 20 seconds
Operating Environment 10-40, Humidity 85%
Specification Size 7cm*5cm*19cm 15.5*8.77*4.4cm
Transportation And Storage Environment -20
-55,Humidity 85%
Black Pepper Oleoresin
Botanical: Piper nigrum
Family: N.O. Piperaceae
Hindi Name: Gol Mirch
General Description: The best Pepper of commerce comes from Malabar. Pepper is mentioned by Roman writers in the fifth century. The plant can attain a height of 20 or more feet, but for commercial purposes it is restricted to 12 feet. The plant is propagated by cuttings and grown at the base of trees with a rough, prickly bark to support them. Between three or four years after planting they commence fruiting and their productiveness ends about the fifteenth year. The berries are collected as soon as they turn red and before they are quite ripe; they are then dried in the sun.
Geographical Sources: Black pepper is native to Malabar, a region in the Western Coast of South India; part of the union state Kerala. It is also grown in Malaysia and Indonesia since about that time when it was found in the Malabar Coast. In the last decades of the 20th century, pepper production increased dramatically as new plantations were founded in Thailand, Vietnam, China and Sri Lanka. The most important producers are India and Indonesia, which together account for about 50% of the whole production volume
History/Region of Origin: In South India wild, and in Cochin-China; also cultivated in East and West Indies, Malay Peninsula, Malay Archipelago, Siam, Malabar, etc.
Varieties -> in trade, the pepper grades are identified by their origin. In India -> The most important Indian grades are Malabar and Tellicherry (Thalassery). The Malabar grade is regular black pepper with a slightly greenish hue, while Tellicherry is a special product. Both Indian black peppers, but especially the Telicherry grade, are very aromatic and pungent. In the past, Malabar pepper was also traded under names like Goa or Aleppi. Cochin is the pepper trade center in India.
In South East Asia, the most reputated proveniences for black pepper are Sarawak in Malaysia and Lampong from Sumatra/Indonesia. Both produce small-fruited black pepper that takes on a greyish colour during storage; both have a less-developed aroma, but Lampong pepper is pretty hot. Sarawak pepper is mild and often described fruity.
Description: Oleoresin Black Pepper is the natural extract of dried tender berries of Piper Nigrum Linn of family Piperaceae.
Manufacturing Process: It is obtained by the solvent extraction of Black Pepper and the solvent traces are removed by distilling it in vacua at controlled temperature.
Physical Appearance: It is a yellowish brown viscous liquid with pungent slightly biting aroma of Black Pepper.
Can be custom-made.
On/off lighting & defogger.
Detected temperature range:-50
Working temperature:-15
Resolution: 1
Mounting: snap-in
Fit in size: 137*28*32 mm
Temperature input: ntc sensor*2
S1(freezer) s2(defog)
Maximum loading as following:(resistive load)
Compressor 30a/250v
Cd-xoo series 4 digital temperature controller with following details.
Feature
1. New algorithm using fuzzy logical pid control
2. Six alarm mode setting freely
3. Tc input, rtd input, voltage input, ampere input
4. Relay output, voltage output, ampere output
Model and parameter
1.How to select the type
Standard signal 0-5vdc input, 1-5vdc input
0-10madc input
4-20madc input Level input is 0-50dvc
Rtd Pt100 (0-499.9íµ), gu50(0-99.9íµ) No need custom-made; freee
Exchange the input way
Tc K(0-600íµ), j(0-800íµ), t(0-400íµ
R(0-1600íµ), s(0-1600íµ), b(0-1800íµ), e(0-1000íµ), n(0-1200íµ), l Need custom-mode
2.Technical parameters
Measuring accuracy Less ía0.5%f.Síal dig
Control mode On/off control, pid direct action, pid reverse action
Control accuracy ía1ípc
Control output Relay output, voltage output
0-10madc output, 4-20madc output
Relay contact burden 3a/250vac
Power 90-250vac 50hz/ 60hz
Anti-interference Iec 3g
High control accuracy at the maximum of ía0.1íµ;
Double pid control functions, capable of controlling heating and cooling;
General input, capable of selecting 56 kinds of different input information;
A variety of output modes to greatly meet many requirements for load control;
Capable of selecting pv (measurement value) or sv (set value) 4-20ma transmission output functions;
Capable of selecting external remote control set value functions, which can be used for multiple unit synchronous setup;
Output percentage restriction function and manual/automatic non-disturbance switching;
Automatic diagnosis function, capable of displaying information on any failures;
Capable of selecting this rs485 communication function
