Features:
Gas concentration is digitally and quantitively
Output by means of communications
Alarm output can be set through programming
Factory calibrated, temperature compensated
Compact size, low cost
Applications:
Front-end solution for methane gas alarm
Simple methane gas alarm output
Description
Fsm-t-01 is a pre-calibrated module for methane gas alarm
Which applies tgs2611 sensor together with optimized
Classic circuit measuring methane gas concentration. The
Module is pre-calibrated by figaro's highly accurate calibration
Equipment and manufactured with mature aging process.
The purpose of the module design is to save the development
And production cost of the user to its greatest extent, making
It easier and more convenient for them to manufacture gas
Alarm for civil natural gas.
The module is designed with two different interfaces
Considering the convenience for use. Ttl level’s asynchronous
Communication interface allows the user to read real time
Gas concentrations with very simple commands;also different
Alarm thresholds can be set through communication programming.
When the gas concentration reaches set value alarm
Output signal would be generated automatically from the
Alarm terminal.
Besides , this compact sized module applies a socket type
Design which facilitates regular replacements of the sensors.
For some main board, different modules can also be replaced
Simply by plugging and pulling out, fulfilling the functions of
Detection and alarming for methane and other gases.
Description
The ngm2611 is a pre-calibrated module for natural gas alarms which is precisely
Calibrated in figaro's humidity and temperature controlled facility.
The most important process in manufacturing reliable resdential gas alarms is
Adjusting the alarm point. Calibration is a complicated and time consuming
Process which also requires a substantial investment in calibration equipment. By
Eliminating the costly calibration process, this module enables users to easily and
Simply manufacture residential natural gas alarms. Figaro has taken the complexity
Out of designing a gas detector circuit by providing users with a temperature
Compensation circuit which combines a built-in thermistor and individually adjusted
Load resistor together with figaro’s low power methane gas sensor.
A connector allows easy replacement of the module for the purpose of periodic
Sensor renewal. This input/output connector enables easy installation of the
Module into the gas detectors’ mother board. This same mother board can be
Used for both methane and lpg gas detectors by simply changing the module.
This module is designed to meet the performance requirements of en50194, and ul1484.
Please refer to “technical information for tgs2611” for sensor sensitivity characteristics.
Refer to “application notes for tgs2611” for further information regarding circuit design.
Description
The product is a technical advanced sensor of our new product series. It can automatically measure methane concentration within an area and transmit information in the form of standard electrical signal to the associated equipment.
Application
The product is compatible with various kinds of monitoring systems to achieve real-time gas sensing and detection.
Features:
* Alarm output can be set through programming
* Continuous pulse output when alarming
* Factory calibrated, temperature compensated
* Compact size, low cost
Applications
* Front-end solution for methane gas alarm
* Simple methane gas alarm output
FSM-T-02 is a pre-calibrated module for methane gas alarm which applies TGS2611-E00 sensor together with optimized classic circuit measuring methane gas concentration. The module is pre-calibrated by Figaro's highly accurate calibration equipment and manufactured with mature aging process. The purpose of the module design is to save the development and production cost of the user to its greatest extent, making it easier and more convenient for them to manufacture gas alarm for civil natural gas.
Specifications:
Name: Methane gas sensor module
Model No.: FSM-T-02
Gas sensor: TGS2611-E00
Alarm point concentration: 5%LEL
Accuracy: ±3% LEL
Response time (T90): 30 s
Operating: -10 ~+55 , 25~95%RH
Storage: -25 ~+60 , 20~95%RH
Input voltage: 5.0V ±0.2V DC
Power consumption (Max): 0.5 W
Dimensions: 27.2mm x 22.8mm x 17 mm
Net weight: Less than 15g
2725 Pre Calibrated Methane Sensor Module Suppliers
Short on time? Let Pre Calibrated Methane Sensor Module sellers contact you.
The HBP1800 series all-in-one energy storage solution, support 1KW 2KW 3KW output for different load appliances. It's based on the original cabinet design, stacked with solar energy storage lithium battery 960wh~3072wh, and built in battery protection system, fully retain the use of load power in applications of residential, school, commercial and public utility area.
Features higher capacities for greater compatibility with more power-hungry devices, and the latest in USB-C Power Delivery capable of charging larger USB devices like laptops.
Includes pre-installed solar charging optimization module that functions as a maximum power point tracker (MPPT), resulting in up to 40% faster charge times.
With LiFePO4 lithium cells, known for stability and safety, monitored by a state-of-the-art battery management system that prevents overcharge, over-current, and short circuiting.
Built in Multi safety protection that include short circuit, overload and over-temperture and error code reporting.
The HBP1800 series all-in-one energy storage solution, support 1KW 2KW 3KW output for different load appliances. It's based on the original cabinet design, stacked with solar energy storage lithium battery 960wh~3072wh, and built in battery protection system, fully retain the use of load power in applications of residential, school, commercial and public utility area.
Features higher capacities for greater compatibility with more power-hungry devices, and the latest in USB-C Power Delivery capable of charging larger USB devices like laptops.
Includes pre-installed solar charging optimization module that functions as a maximum power point tracker (MPPT), resulting in up to 40% faster charge times.
With LiFePO4 lithium cells, known for stability and safety, monitored by a state-of-the-art battery management system that prevents overcharge, over-current, and short circuiting.
Built in Multi safety protection that include short circuit, overload and over-temperture and error code reporting.
Electronic components motorcycle parts and auto parts like ic, adapter, connector, sensor, module, fuse, transformer, capacitor, resistor, led light, diode, triode, switch, buzzer, potentiometer, relay and spark plugs..
BEBA Supreme Pre Baby Formula is a meticulously designed and nutritionally superior option for premature infants. Developed by the trusted brand BEBA, known for their commitment to infant health, this formula provides a specialized blend of nutrients tailored to meet the unique needs of preterm babies. Enriched with essential vitamins, minerals, and prebiotics, it supports optimal growth and development during this critical stage. The formula's composition is carefully calibrated to mimic the benefits of breast milk, providing vital nourishment for premature infants who may require extra care. With BEBA's dedication to excellence and expertise in infant nutrition, BEBA Supreme Pre Baby Formula stands as a reliable choice for parents and caregivers seeking the very best for their preterm infants.
Cirius1 Infrared Sensor for Hydrocarbons Description and Operation
The Cirius range of sensors use the non-dispersive infrared method to detect the presence of gases. The sensors contain an infrared radiation source, a dual element infrared detector and a patented optical arrangement into which gas diffuses. The dual element infrared detector responds to changes in incident radiation and to operate he sensor the infrared source should be pulsed with a duty cycle of 50% at a frequency typically between 2Hz and 4Hz. The sensor produces outputs for active wavelengths, which are modified by the presence of target gas, and for reference wavelengths, which are not modified by the presence of target gas. These outputs consist of a small AC signal in sympathy with the source pulse that is superimposed on a DC voltage pedestal. The sensor also provides a measure of internal temperature via an embedded thermistor. The sensor requires a voltage supply to operate the infrared detector and the connections to the sensor follow the industry standard 7 pin format.
To operate the sensor it must be connected to a suitable circuit that provides the source drive and extracts the small AC signals from the DC voltage pedestal. The circuit must amplify the small AC signals, extract a value from them and treat the results to provide a linear output related to gas concentration. The temperature output from the sensor should be used to apply temperature compensation in order to achieve the full performance specification.
Cirius1 Infrared Sensor for Hydrocarbons Features
* Sensing ranges: 0-100% LFL Methane, 0-100% LFL Hydrocarbons and 0-100% volume Methane
* All metal construction
* Small internal volume
* 'Lightlocked': not affected by external illumination
* Low power
* Active and Reference signal outputs
* Embedded thermistor temperature sensor output
* Wide operating temperature range
* Fast response
* Immunity from 'poisoning'
* Fail safe operation
* Zero maintenance
* Electrically isolated housing
Nap-50a is a miniature & low power consumption type sensor. Nap-50a is
Mainly used for gas detectors. Compared to nap-55a, nap-50a has a lower
Alcohol sensitivity to eliminate false alarms caused by alcohol, thus more reliable
Gas detectors can be produced with nap-50a. The following are the basic
Characteristics but it is recommended to refer to the individual user’s manual for
Further information. See nap-66a for measuring circuit for sensor evaluation.
Target gases and concentration
GasesDetection range
MethaneCh40.05 - 5% (0.05 - 2%)
EthaneC2h60.05 - 3.2% (0.05 - 1.5%)
HydrogenH20.05 - 4% (0.05 - 1.5%)
HydrocarbonsCnh2n+21 - 100%lel (1 - 50%lel)
( )is a detection range in high accuracy
Gas sensitivity characteristics
Gas & concentrationOutput voltage
Output in clean air-35 - +35 mv
Methane 3, 000 ppm10 - 16 mv
Hydrogen 1, 400 ppm7 - 12 mv
Ethanol 1 %Less than 10 mv
Ratings
ItemsRatings
Supply voltageDc 2.5±0.25v
Ac 2.5±0.25v(r.M.S. 50-60hz)
Current (2.5v supplied)Dc 150 - 170ma
Ac 150 - 170ma(r.M.S. 50-60hz)
Ambient temperatureIn operation -10 - +50°c
In storage -10 - +50°c
Ambient humidityIn operation 95%rh or less
In storage 99%rh or less(no dew condensation)
DTZ-400G Series Surface Temperature Calibration System is primarily used to calibrate surface sensors of various sizes and types, such as thermistors, film sensors, surface resistance thermometers, ribbon sensors, surface thermocouples, and more. The product consists of a controller and a heater. It is easy to operate, intuitive to display, and can be heated simply by setting the temperature.The temperature rises rapidly and the multi-stage PID temperature control is accurate. The effective use range is up to 130mm in diameter and has a communication interface to communicate with the computer. This product can be used as an infrared camera calibration source if it is slightly changed.
Product Features
1.The calibration temperature can reach 400 The temperature rises and the temperature drops quickly.
DTZ-400 surface temperature calibration system has a good temperature rise and fall, from room temperature to 400, only 30 minutes, from 400 to room temperature, with a rapid cooling device only 50 minutes, greatly improving work efficiency .
2.Calibration plate diameter up to 130 mm, meeting most surface temperature sensor calibration needs
130mm and is sufficient for calibrating surface sensors of various sizes and types, such as thermistors, film sensors, surface resistance thermometers, ribbon sensors, surface mount thermocouples, etc.
3.External reference platinum resistance thermometer to reduce calibration uncertainty
In order to achieve the ultimate in calibration accuracy, the design engineer deliberately reserved a thermometer socket at the bottom of the aluminum surface. platinum resistance thermometer with a diameter of 5 mm can be inserted as a standard for comparison and calibration, which greatly improves the calibration accuracy.
4.Excellent uniformity of temperature and surface finish on the calibration plane
Surface sensors are often difficult to calibrate because it is difficult to find a flat, uniform source of surface temperature.The DTZ-400 Surface Temperature Calibration System utilizes aluminum as the surface and has a high finish that ensures that the calibrated sensor is in good contact with the surface temperature calibrator, reducing calibration uncertainty. The DTZ-400 uses a special heating material and a constant temperature structure to make the surface temperature more uniform.
5.Temperature control is accurate, stable, and overshoot temperature is small
The device provides a variety of parameter options for the user to choose, including setting the PID parameters of the high,medium and low temperature segments, the inflection point between different temperatures, and the alarm temperature.
6.Portable and easy to use
The weight of the whole machine is only 3.5kg, which is small and portable.
Pdsm010 particle sensor module product summary
Pdsm010 detects approx. 1m particle such as house dust, pollen, germs, dust mites and cigarette smoke and measures the concentration of floating particles in a room space up to maximum 30m3.
This sensor is an ideal product for automatic room air monitoring system such as an air purifier.
Pdsm010's signal is converted to pwm output by internal circuit and mcu program. Also, the sensor's filter circuit and mcu program can remove a noise in order to operate more stably when a noise is in-flowed in the signal.
Pdsm010 has advantages of both stable detecting ability and high manufacturing efficiency.
The sensor does not have an additional control point (vr trimmer) on the device unlike its previous model (dsm). It prevents potential malfunction often occurred by user's arbitrary modification.
Pdsm010 particle sensor module features
* customized sensitivity for efficient control in application
* detects approx. 1m particle
* mcu control (factory calibration)
* easy maintenance
* pwm output (low logic pulse active)
* noise protection
Pdsm010 particle sensor module applications
* air cleaners, air conditioners
* ventilation system, fan control
* iaq monitoring & control
* iot device
DC Input Motion Sensor Module
Standard Motion Sensor Module
5V/12V DC Input Microwave Motion Sensor - Standard Version
HNS101D
5.8GHz C-band microwave, tri-level dimming function.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
Features
5.8GHz C-band microwave, tri-level dimming function.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
5V DC PWM output or 0~10V DC signal.
Super compact, flexible to be integrated into any suitable fixtures.
Dual-PD technology, real Dayligh t m onitoring function for built-in application.
8 pin DIP switch setting, multiple options to meet different customer demands.
Detection range up to 12m in diameter.
Mounting height: 3~6m.
Operation temperature; -20? ~ + 70?.
RoHS compliant.
Settings
Detection range
Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application.
Hold-time
Hold-time means the time period to keep the lamp on 100% after motion detected.
*when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off.
Daylight sensor
Daylight sensor means the daylight threshold to enable or disable the sensor function.
"Disable": The sensor works always, even during daylight.
w50lux": The sensor works only in twilight.
w10lux, 2luxw: The sensor works only in the dark.
Stand-by period
This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people.
?+? means bi-level dimming control, the fixture never switch off.
Stand-by dimming level
This is the dimmed low light level you would like to have after the hold-time in the absence of people.
Daylight monitoring function
Utilizing the Dual-PD technology, this sensor can tell the difference of natural light and artificial light(lamp) from behind the diffuser, switch on automatically(even without movements) when the ambient light is below target value, and then switch off automatically whenever the artificial light is not required(ambient light is bright enough).
This is the REAL & INTELLIGENT daylight monitoring sensor for built-in installation.
Note: Lux-Off sampling time?30s; Lux-On sampling time?10s.
Lux-On function takes effect only when standby dimming period set at.
Pdsm010 particle sensor module product summary
Pdsm010 detects approx. 1m particle such as house dust, pollen, germs, dust mites and cigarette smoke and measures the concentration of floating particles in a room space up to maximum 30m3.
This sensor is an ideal product for automatic room air monitoring system such as an air purifier.
Pdsm010's signal is converted to pwm output by internal circuit and mcu program. Also, the sensor's filter circuit and mcu program can remove a noise in order to operate more stably when a noise is in-flowed in the signal.
Pdsm010 has advantages of both stable detecting ability and high manufacturing efficiency.
The sensor does not have an additional control point (vr trimmer) on the device unlike its previous model (dsm). It prevents potential malfunction often occurred by user's arbitrary modification.
Pdsm010 particle sensor module features
* customized sensitivity for efficient control in application
* detects approx. 1m particle
* mcu control (factory calibration)
* easy maintenance
* pwm output (low logic pulse active)
* noise protection
Pdsm010 particle sensor module applications
* air cleaners, air conditioners
* ventilation system, fan control
* iaq monitoring & control
* iot device
Pdsm010 particle sensor module product specification
* supply voltage: 5v 10% v
* supply current (@ 5v): < 85ma
* storage temperature range: -20 ~ 80'c
* operating temperature range: -10 ~ 65'c
* operating humidity range: < 95%rh
AM2302 Temperature and Humidity Sensor Module Product Overview
AM2302 Humidity-sensitive capacitance digital temperature and humidity module is a digital output signal containing a calibrated temperature and humidity combined sensor. It uses a dedicated digital modules capture technology and the temperature and humidity sensor technology to ensure that products with high reliability and excellent long-term stability. Sensor includes a capacitive humidity sensing element and a high-precision temperature measurement devices, and with a high-performance 8-bit microcontroller connected. Therefore, the product has excellent quality, fast response, anti-interference ability, high cost and other advantages.
AM2302 Temperature and Humidity Sensor Module Applications
HVAC, dehumidifiers, testing and inspection equipment, consumer goods, automotive, automation, data loggers, home appliances, humidity regulator, medical, weather stations, and other related humidity measurement and control, etc.
AM2302 Temperature and Humidity Sensor Module Product Highlights
Ultra-low power, transmission distance, fully automated calibration, using capacitive humidity sensor, completely interchangeable, standard digital single-bus output, excellent long-term stability, high-precision temperature measurement devices.
AM2302 Temperature and Humidity Sensor Module Sensor Performance
* Humidity range: 0~99.9%RH
* Temperature range: -40~+80 deg C
* Humidity Accuracy: ±2%RH
* Temperature Accuracy : ±0.5 deg C
* Humidity Repeatability: ±0.3%RH
* Temperature Repeatability: ±0.2 deg C
* Service voltage: 3.3V to 5.5V
* Output signal: Single
HTM226LF Temperature and Humidity Sensor Module DESCRIPTION
Based on the rugged HS24LF resisitive humidity sensor, HTM226LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a very small size for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the nodule's linear voltage output.
HTM226LF Temperature and Humidity Sensor Module FEATURES
* Full Lead free product
* Calibrated within +/-5% @55%RH at 5Vdc
* Small size and very cost effective
* Miniature connector (JST)
* 50kOhms +/-3% NTC temperature sensor @25'C
* The best combination of cost effectiveness and performance
* Stable, linear proportional voltage output from 0% to 95%RH
* Stable and reproducible characteristics with temperature
* High reliability and long term stability
HTM226LF Temperature and Humidity Sensor Module APPLICATIONS
* Air condition, Humidifier, Dehumidifier
* Humidity controller, Humidity transmitter
* Hygrometer, Hygro-recorder
* Copying machine
* Clock, Weather-forecast barometer
2725 Pre Calibrated Methane Sensor Module Suppliers
Short on time? Let Pre Calibrated Methane Sensor Module sellers contact you.
