Please click here to check who's online and chat with them.

Pre-Calibrated Methane Sensor Module

Supplier From China
Sep-22-16

Features:
Gas concentration is digitally and quantitively
Output by means of communications
Alarm output can be set through programming
Factory calibrated, temperature compensated
Compact size, low cost

Applications:
Front-end solution for methane gas alarm
Simple methane gas alarm output

Description
Fsm-t-01 is a pre-calibrated module for methane gas alarm
Which applies tgs2611 sensor together with optimized
Classic circuit measuring methane gas concentration. The
Module is pre-calibrated by figaro's highly accurate calibration
Equipment and manufactured with mature aging process.
The purpose of the module design is to save the development
And production cost of the user to its greatest extent, making
It easier and more convenient for them to manufacture gas
Alarm for civil natural gas.

The module is designed with two different interfaces
Considering the convenience for use. Ttl level’s asynchronous
Communication interface allows the user to read real time
Gas concentrations with very simple commands;also different
Alarm thresholds can be set through communication programming.
When the gas concentration reaches set value alarm
Output signal would be generated automatically from the
Alarm terminal.

Besides , this compact sized module applies a socket type
Design which facilitates regular replacements of the sensors.
For some main board, different modules can also be replaced
Simply by plugging and pulling out, fulfilling the functions of
Detection and alarming for methane and other gases.

Price and Minimum Quantity

Price: $0.001
MOQ: Not Specified

Recent User Reviews

This user has not received any reviews yet!

Verification Status


 
 
Contact Supplier
Renew

More Items Similiar to: Pre-Calibrated Methane Sensor Module

Oct-17-16
Supplier From Shenzhen, Nanshan, China
 
Factory calibrated methane sensor module for methane sensor tgs2611
Model number: ngm2611

Features:
* factory calibrated
* temperature compensation circuit
* low power consumption sensor tgs2611
* compact size
* meets rohs regulations

Applications:
* residential natural gas alarm

Description
The ngm2611 is a pre-calibrated module for natural gas alarms which is precisely
Calibrated in figaro's humidity and temperature controlled facility.
The most important process in manufacturing reliable resdential gas alarms is
Adjusting the alarm point. Calibration is a complicated and time consuming
Process which also requires a substantial investment in calibration equipment. By
Eliminating the costly calibration process, this module enables users to easily and
Simply manufacture residential natural gas alarms. Figaro has taken the complexity
Out of designing a gas detector circuit by providing users with a temperature
Compensation circuit which combines a built-in thermistor and individually adjusted
Load resistor together with figaro’s low power methane gas sensor.
A connector allows easy replacement of the module for the purpose of periodic
Sensor renewal. This input/output connector enables easy installation of the
Module into the gas detectors’ mother board. This same mother board can be
Used for both methane and lpg gas detectors by simply changing the module.
This module is designed to meet the performance requirements of en50194, and ul1484.
Please refer to “technical information for tgs2611” for sensor sensitivity characteristics.
Refer to “application notes for tgs2611” for further information regarding circuit design.
GOLD Member
VERIFIED
Oct-19-20
Supplier From Seoul, South Korea (Republic Of Korea)
GOLD Member
VERIFIED
Jul-12-24
Supplier From Mumbai, Maharashtra, India
GOLD Member
Mar-28-23
 
Our most advanced intelligent spot detectors, multi-criteria/multi-sensor devices use multiple sensors to detect various conditions in an environment sensing a wider range of fires with greater accuracy.

Features & Benefits:

Multi-Criteria/Multi-Sensor smoke detection
Unique ability to detect major elements of a fire
Highest nuisance alarm immunity
Advanced algorithms interpret and respond to multiple inputs
GOLD Member
Jul-07-25
Supplier From Anyang-si, Gyeonggi-do, South Korea (Republic Of Korea)
GOLD Member
Nov-27-24
Supplier From Shenzhen, China
Dec-13-17
Supplier From Shenzhen, Nanshan, China
 
IRceL CH4 NDIR CH4 Sensor Description
Miniature infrared sensor with on-board EEPROM and thermistor

IRceL CH4 NDIR CH4 Sensor Key Features & Benefits:
* Integrated thermistor for accurate temperature compensation
* EEPROM programmed with sensor specfic performance characteristics
* Compact Size

IRceL CH4 NDIR CH4 Sensor Technical Specifications
* Operating Principle: Non-Dispersive Infra-Red
* Measurement Range: 0-5% vol. Methane
* Accuracy (-20C to +50C): Within ± (0.1% vol CH 4 + 4% of concentration)??
* Response Time (T90): < 35 Seconds
* Supply Voltage: 3-5 VDC, 3.3 V to utilise EEPROM calibration
* MTBF: > 5 years
Oct-17-16
Supplier From Shenzhen, Nanshan, China
 
Nap-50a is a miniature & low power consumption type sensor. Nap-50a is
Mainly used for gas detectors. Compared to nap-55a, nap-50a has a lower
Alcohol sensitivity to eliminate false alarms caused by alcohol, thus more reliable
Gas detectors can be produced with nap-50a. The following are the basic
Characteristics but it is recommended to refer to the individual user’s manual for
Further information. See nap-66a for measuring circuit for sensor evaluation.

Target gases and concentration

GasesDetection range
MethaneCh40.05 - 5% (0.05 - 2%)
EthaneC2h60.05 - 3.2% (0.05 - 1.5%)
HydrogenH20.05 - 4% (0.05 - 1.5%)
HydrocarbonsCnh2n+21 - 100%lel (1 - 50%lel)
( )is a detection range in high accuracy




Gas sensitivity characteristics

Gas & concentrationOutput voltage
Output in clean air-35 - +35 mv
Methane 3, 000 ppm10 - 16 mv
Hydrogen 1, 400 ppm7 - 12 mv
Ethanol 1 %Less than 10 mv

Ratings

ItemsRatings
Supply voltageDc 2.5±0.25v
Ac 2.5±0.25v(r.M.S. 50-60hz)
Current (2.5v supplied)Dc 150 - 170ma
Ac 150 - 170ma(r.M.S. 50-60hz)
Ambient temperatureIn operation -10 - +50°c
In storage -10 - +50°c
Ambient humidityIn operation 95%rh or less
In storage 99%rh or less(no dew condensation)
Dec-09-21
 
DTZ-400G Series Surface Temperature Calibration System is primarily used to calibrate surface sensors of various sizes and types, such as thermistors, film sensors, surface resistance thermometers, ribbon sensors, surface thermocouples, and more. The product consists of a controller and a heater. It is easy to operate, intuitive to display, and can be heated simply by setting the temperature.The temperature rises rapidly and the multi-stage PID temperature control is accurate. The effective use range is up to 130mm in diameter and has a communication interface to communicate with the computer. This product can be used as an infrared camera calibration source if it is slightly changed.
Product Features
1.The calibration temperature can reach 400 The temperature rises and the temperature drops quickly.
DTZ-400 surface temperature calibration system has a good temperature rise and fall, from room temperature to 400, only 30 minutes, from 400 to room temperature, with a rapid cooling device only 50 minutes, greatly improving work efficiency .
2.Calibration plate diameter up to 130 mm, meeting most surface temperature sensor calibration needs
130mm and is sufficient for calibrating surface sensors of various sizes and types, such as thermistors, film sensors, surface resistance thermometers, ribbon sensors, surface mount thermocouples, etc.
3.External reference platinum resistance thermometer to reduce calibration uncertainty
In order to achieve the ultimate in calibration accuracy, the design engineer deliberately reserved a thermometer socket at the bottom of the aluminum surface. platinum resistance thermometer with a diameter of 5 mm can be inserted as a standard for comparison and calibration, which greatly improves the calibration accuracy.
4.Excellent uniformity of temperature and surface finish on the calibration plane
Surface sensors are often difficult to calibrate because it is difficult to find a flat, uniform source of surface temperature.The DTZ-400 Surface Temperature Calibration System utilizes aluminum as the surface and has a high finish that ensures that the calibrated sensor is in good contact with the surface temperature calibrator, reducing calibration uncertainty. The DTZ-400 uses a special heating material and a constant temperature structure to make the surface temperature more uniform.
5.Temperature control is accurate, stable, and overshoot temperature is small
The device provides a variety of parameter options for the user to choose, including setting the PID parameters of the high,medium and low temperature segments, the inflection point between different temperatures, and the alarm temperature.
6.Portable and easy to use
The weight of the whole machine is only 3.5kg, which is small and portable.

Verification Status