1 Thickness: 0.2-1.4mm
2 Width: 600-1400mm
3 Standard: JIS G3312,Inner diameter: 508mm&610mm, Coil Weight: 3-8T
4 Steel Grade: CGCC, DX51D
5 Plate: hot dipped galvanized plate or cold rolled steel plate
6 Categories of paint: polyester, silicon modified polyester(SMP), Fluor polymer paint&PVDF
7 Painting thickness: 25+/-5 microns on top side and 7+/-2 microns on back side
8 Color: white, red, blue or customized as per RAL color card.
9 Packing: Standard export packing, 4 eye bands and 4 circumferential bands in steel,
galvanized metal fluted rings on inner and outer edges, galvanized metal and waterproof
paper wall protection disk, galvanized metal and waterproof paper around circumference
and bore protection.
10 With or without protective film on the top side of color coated sheet or coil.
11 Applications: buildings, vehicles, ships, mechanical and electrical equipment
and electrical household appliance
12 Cutting and slitting can be requested as customer's designation
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills.
It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color.
Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating.
From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list
In particular the mill scale can be classified as follows:
Einecs (european commission no.): 266-007-8
Waste code: 10 02 10
Basel code: b 12 30
Hs code: 2619.00
We deals in the following products of India, China, Taiwan and Korea Origin:-
Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc)
1.2m-12m or according to customer\'s special request
width
610,760,840,900,914,1000,1200,1250mm
Tolerance
Thickness: +/-0.02mm, Width:+/-2mm
Material grade
Q195 Q215 Q235 Q345
SS490 SM400 SM490 SPHC SPHD SPHE SPHF
SEA1002 SEA1006 SEA1008 SEA1010
S25C S35C S45C
65Mn
SPHT1 SPHT2 SPH3 SPH4
QstE
Others as your requirement
surface
iron gray (low carbon plate), brown (special alloy plate, the high carbon plate), partial ochre (weather resistance), with temperature oxidation pattern, than manufacture rough surface
We deals in the following products of India, China, Taiwan and Korea Origin:-
Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc.)
Metal base - Cold rolled steel coil
Thickness - 0.14mm-1.2mm
Width - 600mm-1250mm
Coil ID - 508mm,according to request
Zinc Coating - 40-275g/m2
Coil weight - 3-5 tons,according to request
Finish - Hot dipped galvanized
Hot sale size -750mm,762mm,800mm,900mm,914mm,1000mm,1200mm,1220mm,1250mm
DC01 Galvanized steel coil is used for automobiles, sanitary ware, food machinery, pressure vessels, nuclear power, chemical equipment, elevators, rail transit, machinery manufacturing, structural piping, and architectural decoration.
PPGI is galvanized color plate, PPGL is galvanized color plate, both are color plates, the substrates are different, one is galvanized structure, the other is galvanized structure, the substrate is different, which determines the difference in performance.
Advantages: It not only has the mechanical strength and easy forming properties of steel plates, but also has good decorative properties and corrosion resistance of organic materials. The coating has strong adhesion and can keep the color fresh for a long time. Application: Widely used in various fields such as construction, home appliances, furniture, public facilities and transportation.
PPGI/PPGL DC01
Manufacturer JIS DIN high-quality electro-galvanized steel coil
Q235 galvanized coil is a surface galvanized coil with yield strength of 235MPa.
PPGI is galvanized color plate, PPGL is galvanized color plate, both are color plates, the substrates are different, one is galvanized structure, the other is galvanized structure, the substrate is different, which determines the difference in performance.
Advantages: It not only has the mechanical strength and easy forming properties of steel plates, but also has good decorative properties and corrosion resistance of organic materials. The coating has strong adhesion and can keep the color fresh for a long time. Application: Widely used in various fields such as construction, home appliances, furniture, public facilities and transportation.
PPGI/PPGL Q195
Manufacturer JIS DIN high-quality electro-galvanized steel coil
Material: PC coated PMMA Sheet off cuts Transparent color
Category: PC coated PMMA
Type: Sheet off cuts
Grade/Color: Transparent color
Quantity: 63 Tons
Loading weight: 22 Tons
Spec: PC coated PMMA all clear color base, with one or both sides PE film protected. Subject to unsold
Material: PC coated PMMA Sheet off cuts Transparent color
Category: PC coated PMMA
Type: Sheet off cuts
Grade/Color: Transparent color
Quantity: 63 Tons
Loading weight: 22 Tons
Spec: PC coated PMMA all clear color base, with one or both sides PE film protected. Subject to unsold
Material: PC coated PMMA Sheet off cuts Transparent color
Category: PC coated PMMA
Type: Sheet off cuts
Grade/Color: Transparent color
Quantity: 63 Tons
Loading weight: 22 Tons
Spec: PC coated PMMA all clear color base, with one or both sides PE film protected. Subject to unsold
with GI and GL as the substrate, after surface pre-treatment, paint coating, baking and cooling, an organic protective film is formed on the steel substrate. It has strong durability, corrosion resistance, decoration and formability, widely used in consstruction, household appliances, solar energy, transportation and other industries.
