Pogo Pin Semiconductor Test Probe SCPA101 for IC Inspection
Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc.
This product SCPA085 we will introduce is 1.01 mm in barrel diameter and 12.8 mm in total length. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold. The bottom plunger is made from beryllium copper plated with nickel and gold. The same is with the top plunger. The inner spring is made from music wire plated with gold and nickel. This double-ended pogo pin could withstand the current up to 3 amps. The typical maximal contact resistance is about 120 milliohms.
The plunger can be pressed at a distance of up to 2 mm. But it is better to be pressed at a distance of 1.3 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 1.3 mm, the loaded force is about 20 gf, which fluctuates to a tolerance.
For details, please check parameters in below table.
Materials (plated)
Barrel: Phosphor Bronze, Au on Ni Plated
Bottom Plunger: Beryllium Copper, Au on Ni Plated
Top Plunger: Beryllium Copper, Au on Ni Plated
Spring: SWP-A/B, Au on Ni Plated
Electronic Specification:
Current Rating: 3 amps
Contact Resistance: 120 milliohms max
Bandwidth: 11.7 GHz at -1dB
Inductive Reactance: 1MHZ at -0.02219 uH
Capacitive Reactance: 1MHZ at 1.04567 uF
Specifications:
Full Stroke: 2 mm
Rated Stroke: 1.3 mm
Spring Force: 20�±4 gf at load 1.3 mm
Mechanical Life: about 200000 cycles
Company Information:
Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
* Mastic compound application consist of two coats of. Primer ,Primer and followed by Mastic compound in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack.
1). Surface preparation and application of Primer: Refer application method of Primer.
2). After doing necessary surface preparation and application of primer coating, area to be installed with Mastic compound should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. Mastic compound is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes.
CHEMICAL RESISTANCE PROPERTIES:
* Mastic compound has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats
STORAGE & PACKING:
* Keep Mastic compound away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs.
HEALTH & SAFETY:
* Handle melted Mastic compound compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of Mastic compound and all other our products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
Semiconductor Test Probe Pogo Pin SCPC035 Series for IC Inspection
Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc.
This product SCPC035 we will introduce is 0.35 mm in barrel diameter and 7.7 mm in total length. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold. The bottom plunger is made from beryllium copper plated with nickel and gold. The same is with the top plunger. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 2.5 amps. The typical maximal contact resistance is about 100 milliohms.
The plunger can be pressed at a distance of up to 1 mm. But it is better to be pressed at a distance of 0.5 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.5 mm, the loaded force is about 18 gf, which fluctuates to a tolerance.
For details, please check parameters in below table.
Materials (plated)
Barrel Phosphor Bronze, Au on Ni Plated
Bottom Plunger Beryllium Copper, Au on Ni Plated
Top Plunger Beryllium Copper, Au on Ni Plated
Spring SWP-A/B, Au on Ni Plated
Electronic Specification:
Current Rating 2.5 amps
Contact Resistance 100 milliohms max
Bandwidth 5.8 GHz at -1dB
Inductance 1MHZ at -0.01039 uH
Captance 1MHZ at 2.35287 uF
Specifications:
Full Stroke 1 mm
Rated Stroke 0.5 mm
Spring Force 18 �±5 gf at load 0.5 mm
Mechanical Life about 200000 cycles
Company Information:
Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Semiconductor Test Probe Double-ended Pogo Pin SCPA085 for IC Inspection
Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc.
This product SCPA085 we will introduce is 0.85 mm in barrel diameter and 5.7 mm in total length. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold. The bottom plunger is made from beryllium copper plated with nickel and gold. The same is with the top plunger. The inner spring is made from stainless steel plated with gold and nickel. This double-ended pogo pin could withstand the current up to 6 amps. The typical maximal contact resistance is about 100 milliohms.
The plunger can be pressed at a distance of up to 1.1 mm. But it is better to be pressed at a distance of 0.65 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.65 mm, the loaded force is about 22 gf or 31 gf, which fluctuates to a tolerance.
For details, please check parameters in below table.
Materials (plated)
Barrel: Phosphor Bronze, Au on Ni Plated
Bottom Plunger: Beryllium Copper, Au on Ni Plated
Top Plunger: Beryllium Copper, Au on Ni Plated
Spring: SUS304, Au on Ni Plated
Electronic Specification:
Current Rating: 6 amps
Contact Resistance: 100 milliohms max
Bandwidth: 12.1 GHz at -1dB
Inductance: 1MHZ at -0.03212 uH
Captance: 1MHZ at 0.792734 uF
Specifications:
Full Stroke: 1.1 mm
Rated Stroke: 0.65 mm
Spring Force: 226 gf at load 0.65 mm, 319 gf at load 0.65 mm
Mechanical Life: about 200000 cycles
Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
1390 Pogo Pin Semiconductor Test Probe Scpa101 Suppliers
Short on time? Let Pogo Pin Semiconductor Test Probe Scpa101 sellers contact you.
Spring Pogo Pin Semiconductor Test Probe SCPC028 Applied to IC Inspection
Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc.
This product SCPC028 we will introduce is 0.28 mm in barrel diameter. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold or gold clad phosphor bronze. The bottom plunger is made from beryllium copper plated with nickel and gold. The top plunger is made from SK4 plated with nickel and gold. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 2 amps. The typical maximal contact resistance is about 150 milliohms.
The plunger can be pressed at a distance of up to 1.05 mm. But it is better to be pressed at a distance of 0.7 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.7 mm, the loaded force is about 25 gf, which fluctuates to a tolerance.
For details, please check parameters in below table.
Materials (plated)
Barrel: Phosphor Bronze/Gold Clad Phosphor Bronze, Au on Ni Plated
Bottom Plunger: Beryllium Copper, Au on Ni Plated
Top Plunger: SK4, Au on Ni Plated
Spring: SWP-A/B, Au on Ni Plated
Electronic Specification:
Current Rating: 2 amps
Contact Resistance: 150 milliohms max
Bandwidth: 8.5 GHz at -1dB
Inductive Reactance: 1MHZ at -0.0788 uH
Capacitive Reactance: 1MHZ at 0.3165 uF
Specifications:
Full Stroke: 1.05 mm
Rated Stroke: 0.7 mm
Spring Force: 25�±7 gf at load 0.7 mm
Mechanical Life: about 100000 cycles
Company Information:
Centalic Technology Development Ltd was founded in 1980.Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Semiconductor Test Probe Pogo Pin SCPB038 for IC Inspection
Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc.
This product SCFB038 we will introduce is 0.38 mm in barrel diameter and 6 mm in total length. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold The bottom plunger is made from beryllium copper plated with nickel and gold. The same is with the top plunger. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 1.5 amps. The typical maximal contact resistance is about 100 milliohms.
The plunger can be pressed at a distance of up to 1 mm. But it is better to be pressed at a distance of 0.6 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.6 mm, the loaded force is about 25 gf, which fluctuates to a tolerance.
For details, please check parameters in below table.
Materials (plated)
Barrel: Ph, Au on Ni Plated
Bottom Plunger: BeCu, Au on Ni Plated
Top Plunger: BeCu, Au on Ni Plated
Spring: SWP-A/B, Au on Ni Plated
Electronic Specification:
Current Rating: 1.5 amps
Contact Resistance: 100 milliohms max
Bandwidth: 5.3 GHz at -1dB
Propagation Delay: 27 ps
Inductance: 1MHZ at -0.02809 uH
Captance: 1MHZ at 0.876347 uF
Specifications:
Full Stroke: 1 mm
Rated Stroke: 0.6 mm
Spring Force: 25 7 gf at load 0.6 mm
Mechanical Life: about 200000 cycles
Company Information:
Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Semiconductor Test Probe Pogo Pin SCFE035 for Integrated Circuit Inspection
Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc.
This product SCFE035 we will introduce is 0.35 mm in barrel diameter and 18 mm in total length. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold The bottom plunger is made from SK4 plated with nickel and gold. The same is with the top plunger. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 1.5 amps. The typical maximal contact resistance is about 150 milliohms.
The plunger can be pressed at a distance of up to 1.5 mm. But it is better to be pressed at a distance of 1 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 1 mm, the loaded force is about 38 gf, which fluctuates to a tolerance.
For details, please check parameters in below table.
Materials (plated)
Barrel: Ph, Au on Ni Plated
Bottom Plunger: SK4, Au on Ni Plated
Top Plunger: SK4, Au on Ni Plated
Spring: SWP-A/B, Au on Ni Plated
Electronic Specification:
Current Rating: 1.5 amps
Contact Resistance: 150 milliohms max
Bandwidth: 9.3 GHz at -1dB
Inductance: 1MHZ at -0.05517 uH
Captance: 1MHZ at 0.462432 uF
Specifications:
Full Stroke: 1.5 mm
Rated Stroke: 1 mm
Spring Force: 38�?�±11 gf at load 1 mm
Mechanical Life: about 200000 cycles
For more information, please check below catalog.
Company Information:
Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Semiconductor Test Probe Pogo Pin SCPA030 Series for IC Inspection
Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc.
This product SCPA030 we will introduce is 0.3 mm in barrel diameter. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold or gold clad phosphor bronze. The bottom plunger is made from beryllium copper plated with nickel and gold. The same is with the top plunger. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 2 Amps. The typical maximal contact resistance is about 100 milliohms.
The plunger can be pressed at a distance of up to 1.1 mm. But it is better to be pressed at a distance of 0.65 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.65 mm, the loaded force is about 10 gf, which fluctuates to a tolerance.
For details, please check parameters in below table.
Materials (plated)
Barrel: Ph/ SP, Au on Ni Plated
Bottom Plunger: BeCu, Au on Ni Plated
Top Plunger: BeCu, Au on Ni Plated
Spring: SWP-A/B, Au on Ni Plated
Electronic Specification:
Current Rating: 2 amps
Contact Resistance: 100 milliohms max
Bandwidth: 7.1 GHz at -1dB
Inductance: 1MHZ at -0.02524 uH
Captance: 1MHZ at 1.12735 uF
Specifications:
Full Stroke: 1.1 mm
Rated Stroke: 0.65 mm
Spring Force: 10 ±3 gf at load 0.65 mm
Mechanical Life: about 200000 cycles
Company Information:
Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Pogo Pin Semiconductor Test Probe SCPA025 Series for IC Test
Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc.
This product SCPA025 we will introduce is 0.25 mm in barrel diameter. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold or gold clad phosphor bronze. The bottom plunger is made from beryllium copper plated with nickel and gold. The same is with the top plunger. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 1 Amp. The typical maximal contact resistance is about 100 milliohms.
The plunger can be pressed at a distance of up to 1.1 mm. But it is better to be pressed at a distance of 0.65 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.65 mm, the loaded force is about 14 gf, which fluctuates to a tolerance.
For details, please check parameters in below table.
Materials (plated)
Barrel�¯�¼? Ph/SP, Au on Ni Plated
Bottom Plunger�¯�¼? BeCu, Au on Ni Plated
Top Plunger BeCu, Au on Ni Plated
Spring SWP-A/B, Au on Ni Plated
Electronic Specification:
Current Rating 1 amp
Contact Resistance 100 milliohms max
Bandwidth ? 9.3 GHz at -1dB
Inductance 1MHZ at -0.02384 uH
Captance 1MHZ at 1.06747 uF
Specifications:
Full Stroke 1.1 mm
Rated Stroke 0.65 mm
Spring Force 4 gf at load 0.65 mm
Mechanical Life about 100000 cycles
Company Information:
Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Semiconductor Test Probe Double-ended Pogo Pin SCPE015 for IC Inspection
Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc.
This product SCPE015 is the tiniest series in semiconductor test probes since its outside diameter is only 0.15mm. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices  Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
Its parameters are as below.
Materials (plated)
Barrel: Gold Clad, No Plated
X-Bottom (Plunger 1): Pd, No Plated
Y-Top (Plunger 2): Pd, No Plated
Spring: SWP, Au on Ni Plated
Electronic Specification:
Current Rating: 0.5 amp
Contact Resistance: 250 milliohms max
Bandwidth: 11.4 GHz@-1dB
Inductance: 1MHZ@-0.06439uH
Captance: 1MHZ@0.364375uF
Specifications:
Full Stroke: 0.8 mm
Rated Stroke: 0.6 mm
Spring Force: 9 ±2 gf@load 0.6 mm
Mechanical Life: about 100000 cycles
Company Information:
Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment.
Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals.
Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us.
Notice:
Stock: standard product. As usual, they are in stock.
Express: DHL, FedEx, UPS, etc.
Payment: T/T, PayPal
SILICON WAFERS are the building blocks of modern technology, they provide the substrate onto which circuits are constructed. We offer Prime, Test, Monitor, SEMI standard, and customized silicon wafers in all diameters from 2�¢?�³ to 300mm. Our Wafers meet the SEMI standards, along with customized options.
Silicon On Insulator (SOI) Wafers: Chips fabricated on SOI wafers achieve 30% faster speeds and 80% lower power demands compared to CMOS devices. The SOI structure consists of three layers: a top active device layer for transistor fabrication, a buried oxide (BOX) insulator layer, and a bottom handle wafer layer.
Silicon Float Zone Wafers: is a crystal growth technique that produces highly pure silicon wafers with fewer impurities than traditional methods.
Silicon Thermal Oxide Wafers: Has high quality silicon thermal oxide wafers in all diameters from 2�¢?�³ to 300mm.
Silicon Nitride Wafers: Has different option of film processing for your silicon needs, including LPCVD nitride.
On Insulator (SOI): Has high quality silicon thermal oxide wafers in all diameters from 2�¢?�³ to 300mm.
Fused Silica Wafers: is the amorphous phase of quartz (SiO2).
Borofloat 33 Glass Wafers: is used in a wide range of applications like micro-optics, sensors, microlithography, semiconductor engineering, lighting, medical technology.
FLAT BOTTOM POGOPIN
Flat-Bottom POGOPIN, Multi-Layer Steps Of Outer Diameter Can Be Formed In One Go
Cam Automatic Car Once Formed, Surface Treatment: Can Be Gold Plated. With Anti-Corrosion, Small Size, High Current , Can Be Processed Custom. For Wearable Devices, Notebooks, Medical Electronics Spring Needle Antenna Thimble Charging Probe.
Material: C3604 Size: Customizable
Stretch: 72g�±20g (Customizable) Current: 1-30A Customizable)
Ningbo Yi Yi Precision Technology Co., Ltd. is a professional non-standard high precision hardware parts� manufacturer, our main products includes high precision turned parts/CNC, hexagonal pillar, pogopin linker (pogo pin connector),standard/non-standard fasteners, stainless steel screws, stamping, cold heading bolts/cold heading nuts,stainless steel crank shaft, die casting/casting parts, lock accessories/cylinder.
Switching Probes is a kind of functional probes. They are used to determine the correct location of a terminal in a connector. They can also be used to determine the presence of nonconductive components, etc.
Their application field is mainly as below
Wire harness connector
PCB component detection
Door open-close switch
Fixture component detection
Automation process sensing
Position and retention force
Below switching probe we will introduce is SWP164. Its diameter is 1.64 mm and total length is 44.65 mm.
As usual, switching probes do not entail very high currents, and this model SWP260 can work with the current up to 3 A.
The typical maximum contact resistance of this model SWP164 is 160 m.
The materials used for the construction of switching probes are different for each component:
The barrel is made of brass. Subsequently gold plated during the galvanic plating phase.
The spring is made of gold plated music wire.
The plunger is made of Beryllium Copper, then gold and nickel plated.
The insulating sleeve is made of POM
For details of SWP164 switching probe, please check below parameters.
Technical Specifications
Recommended
Current Rating: 3 Amps, continuous
Contact Resistance: 160 milliohms, maximum
Full Stroke: 5 mm
Rated Stroke: 3.3 mm
Spring Force: 130 gf (4.5 oz)
Normal Condition: Disconnecting between Plunge 1 and Plunger 2
Press down 1 mm: Continuity between Plunger 1 and Plunger 2
Materials
Contact Barrel: Brass, Au on Ni Plated
Spring: SWP, Au on Ni Plated
Plunger 1: Beryllium Copper, Au on Ni Plated
Plunger 2: Beryllium Copper, Au on Ni Plated
Insulating Sleeve: POM
Advantages of this switching probe
Reliable performance
Low cost of test
Best yield
Our company are also able to change the head shape, total length and diameter, etc., of our switching probes to facilitate their use in different applications. The pitch of installation of switch probes depends on your specific needs.
Company Information
Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Test Probe Pogo Pin PL50 Series for PCBA Inspection
In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits.
We will introduce in-circuit test probe PL50 series here. Its test center is 50 mil, namely 1.27 mm. The diameter is 0.68 mm and the total length is 27.53 mm. Various tip styles, for example, H, S, T, E, C, U, G, etc., are available for test probes. There are roughly four types of receptacles, namely CR, VCR, SC, VSC, CRW and VCRW, to fit each test probe.
For details, please check below parameters.
Technical Specifications
Recommended
Minimum Center: 1.27 mm (50 mil)
Current Rating: 3 Amps, continuous
Contact Resistance: 50 milliohms
Mounting Hole Size: Diameter 0.95 mm
Full Stroke: 3.7 mm
Rated Stroke: 2.54 mm
Spring Force: 28/56/85 gf (1/2/3 oz)
Company Information
Centalic Technology Development Ltd. was founded in 1980.Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
PCBA Test Probe Pogo Pin P166 Series Applied to ICT
In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits.
We will introduce in-circuit test probe P166 series here. Its diameter is 1.66 mm and the total length is 48.4 mm. Various tip styles, for example, B3, H, S, T, E, C, U, G, etc., are available for test probes.
For details, please check below parameters.
Technical Specifications
Recommended
Rated Stroke: 5 mm
Spring Force: 500 gf (11 oz)
semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
In-circuit Test Probe Pogo Pin P156 Series for PCB Assembly Inspection
In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits.
We will introduce in-circuit test probe PQ156 series here. Its test center is 156 mil. The diameter is 2.36 mm and the total length is 33.79 mm. Various tip styles, for example, B, C, G, J, K, L, T, etc., are available for test probes. There are roughly four types of receptacles, namely CR, SC, WW and WW-L, to fit each test probe
For details, please check below parameters.
Technical Specifications
Recommended
Minimum Center: 3.96 mm (156 mil)
Current Rating: 5 Amps, continuous
Contact Resistance: 50 milliohms
Mounting Hole Size: 2.75 mm
Full Stroke: 6.35 mm
Rated Stroke: 4.32 mm
Spring Force: 113/198/255/285 gf (4/7/9/10 oz)
Company Information
Centalic Technology Development Ltd was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment.
Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals.
Electronic Test Probe Pogo Pin PC50 Series for PCBA Inspection
In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits.
We will introduce in-circuit test probe PC50 series here. Its test center is 50 mil, namely 1.27 mm. The diameter is 0.78 mm and the total length is 43.2 mm. Various tip styles, for example, H, S, T, E, C, U, G, etc., are available for test probes. There are roughly four types of receptacles, namely CR, SC, SW and CRW, to fit each test probe.
For details, please check below parameters.
Technical Specifications
Recommended
Minimum Center: 1.27 mm (50 mil)
Current Rating: 3 Amps, continuous
Contact Resistance: 60 milliohms
Mounting Hole Size: 1 mm
Full Stroke: 6.4 mm
Rated Stroke: 4.3 mm
Spring Force: 100/110/150/200 gf (3.6/4/5.4/7.2 oz)
Company Information
Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment.
Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals.
Printed Circuit Board Assembly Test Probe Pogo Pin PQ75 Series Applied to ICT
In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits.
We will introduce in-circuit test probe PQ75 series here. Its test center is 75 mil. The diameter is 1.02 mm and the total length is 33.02 mm. Various tip styles, for example, H, K, L, BK, etc., are available for test probes. There are three types of receptacles, namely CR, SC and WW, to fit each test probe.
For details, please check below parameters.
Technical Specifications
Recommended
Minimum Center: 1.91 mm (75 mil)
Current Rating: 3 Amps, continuous
Contact Resistance: 40 milliohms
Mounting Hole Size: Diameter 1.35 mm
Full Stroke: 6.35 mm
Rated Stroke: 4.3 mm
Spring Force: 112/150/198 gf (4/5.5/7 oz)
Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Wire Harness Probe Pogo Pin CHD136 for the Tests of Automotive Industry
Harness probes are mainly used directly or for the tests of the automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. The standard and requirements for them are high compared with other test probes. Harness probes can be divided into screw-thread harness probes, harness switch probes, non-screw-thread harness probes, position-limited harness probes and high-current harness probes, etc.
The CHD136 harness probe we will introduce here is 1.36 mm in diameter and 33 mm in total length. Its barrel is made of brass plated with gold and nickel. The plunger is made of gold-plated beryllium copper, which is softer but less magnetic than the alternative SK4. The spring inside is made of music wire plated with gold and nickel.
This probe can withstand up to the current 3 Amps. Its typical maximum contact resistance is 50 milliohms. It is suggested the plunger be pressed at a distance of 4.6 mm at most when this probe works, although the plunger can move as far as 7 mm. Otherwise, the spring inside the barrel will probably be damaged under constant pressure. When the plunger is pressed at a distance of 4.6 mm, its loaded force is about 255 gf, namely 9 ounces or so. Furthermore, the force fluctuates in a range due to the tolerance.
Technical Specifications
Recommended
Current Rating: 3 Amps, continuous
Contact Resistance: 50 milliohms
Full Stroke: 7 mm
Rated Stroke: 4.6 mm
Spring Force: 255�±75 gf (9 oz) at load 4.6 mm
Materials (plated)
Barrel: Brass, Au on Ni Plated
Plunger: Beryllium Copper, Au on Ni Plated
Spring: SWP-A/B, Au on Ni Plated
Company Information
Centalic Technology Development Ltd. was founded in 1980.Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
1390 Pogo Pin Semiconductor Test Probe Scpa101 Suppliers
Short on time? Let Pogo Pin Semiconductor Test Probe Scpa101 sellers contact you.
