REFINERY TANK TO VESSEL&TANK/DIP & PAY PROCEDURE
1. Buyer issues official ICPO addressed to the refinery or representative.
2. Seller issues Commercial Invoice (CI), buyer signs and returns the signed invoice to the seller. 3. Seller issues to the buyer the partial proof of product documents:
- ATSC - Authority to sell and collect.
- DTA - Dip Test Authorization
- PRODUCT PASSPORT - Product analysis report from a renowned inspection company.
- STATEMENT OF PRODUCT AVAILABILITY DULY SIGNED AND NOTARIZED BY THE APPROPRIATE AUTHORITIES.
- COMMITMENT LETTER TO SUPPLY
- ATV �¢?? Authority to verify the existence of product via email or phone call.
4. Buyer sends Dip Test Authorization to the seller�¢??s tank farm for endorsement extends seller�¢??s tank and receives full GPS coordinates of the tanks, Hub Numbers, terminal access permit and dip test is conducted immediately with buyer�¢??s team to obtain fresh SGS report.
5. After a successful Dip Test in Seller�¢??s tanks, Buyer takes over seller�¢??s tank or Seller injects into buyer�¢??s vessel / Tank and buyer conducts its DIP TEST Inspection for Q & Q of the Petroleum Products aboard vessel / Tank.
6. Buyer after a successful Q &Q Dip test on the product, the buyer makes the payment for the total value of the product injected into the tanks through the means of MTI03 - TT.
7. Upon seller receives the payment for the product from the buyer, the seller issues to the buyer the Title ownership of the product and all exporting documents of the Product.
8. The seller pays all intermediaries involved in the transaction.
FOB TRANSACTION PROCEDURES
1. Buyer Issues ICPO, Company Registration Certificate and Tank Storage Agreement(TSA)for
seller approval.
2. Seller issues COMMERCIAL INVOICE (CI), STATEMENT OF PRODUCT AVAILABILITY, and
COMMITMENT to SUPPLY the available quantity in the Storage Tank and then program the
injection. THIS USUALLY DEPENDS ON THE LOCATION.
3. Buyer countersigns Commercial Invoice (CI) & Warning Letter with NCNDA/IMFPA signed
by all Buyer groups with commission structures.
4. Send the below proof of product (Documents) via email If Necessary.
Fresh SGS (Q&Q report) less than 48 hours.
Tank storage receipt. (TSR).
Authorization to verify (ATV).
Injection report Shore Tank (IR).
Certificate of Origin.
Product passport.
Authorization to Sell and collect (ATSC).
5. After the successful verification of the product existence, buyer order SGS to conduct their
Dip-Test in the seller tank on buyer expense and then issues buyer.
â?¢ Unconditional Dip Test Authorization (UDTA).
â?¢ ATSC authorization to Sell/Collect.
â?¢ Title of Ownership Certificate, (on seller expense).
6. Upon the successful dip test, Buyer presents their tank storage receipt (TSR), Seller issues
all export Documentation.
7. Buyer makes payment by MT103 or TT wire transfer for the total product and lifts the
product and seller pays all Intermediary involved on the transaction.
EN590 ULSD available in Major Ports for FOB shipping terms, Kazakhstan Origin,
EN590 FOB price is $470/mt including $10 commission to buyer's side.
FREE ON BOARD (FOB) PROCEDURE
1. Buyer Issues ICPO:
The buyer submits an Irrevocable Corporate Purchase Order (ICPO) with banking details and passport information.
2. Seller Issues Commercial Invoice (CI):
The seller sends a Commercial Invoice (CI) for the available product, which the buyer countersigns.
3. Seller Provides POP Documents:
The seller provides Proof of Product (POP) documents, including:
SGS Report
Tank Storage Receipt (TSR)
Product Analysis
Injection Report
Authority to Verify (ATV)
Refinery Commitment Letter
Authorization to Sell and Collect (ATSC)
4. Buyer Verifies POP:
The buyer contacts the tank farm to confirm product availability.
5. Payment & Dip Test:
The buyer pays for a 5-day tank lease, and the seller issues an Unconditional Dip Test Authorization (UDTA). The tank farm provides a Clearance Access Entrance Permit (CAEP) for the dip test and SGS report.
6. NCNDA/IMFPA Signed:
All intermediaries sign the NCNDA/IMFPA and send it to the seller for endorsement.
7. Sealing & Final Payment:
After a successful dip test, the buyer requests tank sealing. The buyer pays for the full product via MT103/T/T and extends the tank lease for 48 hours.
8. Payment to Intermediaries:
The seller pays the intermediaries within 48 hours of receiving payment
TRANSACTION PROCEDURES FOR FOB JURONG/QINGDAO PORT TANK TO TANK (TTT)
1) Buyer issues ICPO and certificate of incorporation
2) Seller issues Commercial Invoice (CI) , buyer's signs and returns to Seller with his TSA, Seller verify buyer TANK FARM and make 3days tank lease payment to the buyer tank farm for the Injection Process.
3) Buyer pays his Tank Farm Company for 2 days tank storage costs, after his Tank Farm Company has received the buyer's payment the Seller Company pays 3 days cost (totaling) 5days TSR
4) Seller inject into buyer tank and issues SGS, ATV and Unconditional DTA.
5) Buyer conducts Dip Test and makes the payment for the total value of product injected TRANSACTION PROCEDURES FOR FOB JURONG/QINGDAO PORT TANK TO TANK (TTT)
1) Buyer issues ICPO and certificate of incorporation
2) Seller issues Commercial Invoice (CI) , buyer's signs and returns to Seller with his TSA, Seller verify buyer TANK FARM and make 3days tank lease payment to the buyer tank farm for the Injection Process.
3) Buyer pays his Tank Farm Company for 2 days tank storage costs, after his Tank Farm Company has received the buyer's payment the Seller Company pays 3 days cost (totaling) 5days TSR
4) Seller inject into buyer tank and issues SGS, ATV and Unconditional DTA.
5) Buyer conducts Dip Test and makes the payment for the total value of product injected into the tanks through the means ofMT103-
6) Seller pays all intermediaries involved in the transaction, and subsequently monthly shipment continues as per terms and Conditions of the sales and purchase agreement contract between buyer and seller .
Diesel En590 10-50-500-5000 And Others Ppm Ultra Low Sulphur.
D2 0,2-62 Gost 305-82 Or 0,01 Or 0,05.
D2 Automotive Fuel Oil (ago).
D6 Virgin Fuel Oil.
Hsd Diesel High Speed 500ppm En90.
Diesel En590 Euro4 Gost 52368.
Pms Premium Motor Spirit
Jp54 (ts1) Gost 10227-86.
Jet Fuel A1 Gost 10227-86.
Marine Fuel Oil Cst 180-280-380.
Espo (siberia Pacific Oil) Crude Oil Api 34,7.
Lco (light Cycle Oil).
Mazut Mt100 Gost 10585-75 And 10585-99.
Rebco Gost 51 858-2002/9965-76 Api32/crude Oil 39-1623-93.
Lpg 50/50 Propane/butane - 70/30 P/b.
Lng 5542-87 By Iso Containers Etc.
Gasoline All Types (87-89-92-95).
Bitumen/asphalt All Grades.
Fertilizers Urea, Dap, Etc
Product Description :
Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. ... These fuels include or can be blended to give gasoline, jet fuel, diesel fuel, heating oil, and heavier fuel oils..
Price of product ( USD price or FOB price) :
20.000 MT monthly market price.
100.000 MT monthly market price Less 5%.
Product origin : Russia and Non Russia
Key Specifications/Special Features :
All types/grades of Fuels, Gas, Oil are available for supply.
Many commercial names for oils, fuels, gases, etc. are used in the market.
To avoid misunderstanding basic details of specifications needed by buyer are mandatory.
Specifications for types/grades of products (special grade needed by buyer) will be issued after received your credible purchase request in the form LOI/ICPO docs.
Minimum Order Size and Packgaing details :
Bulk in tanker vessels.
Tanks 20 MT.
1015 Pmr Fob Fujairah And Rotterdam En590 Suppliers
Short on time? Let Pmr Fob Fujairah And Rotterdam En590 sellers contact you.
En590 10ppm Diesel
Vopak-to-vopak Procedure:
1- Buyer Sends Cis + Cp
2- Conference Call /meeting Between Buyer & Seller Where Both The Parties Exchanges
Vopak Tank Coordinates
3- Seller Release Ci, Buyer Counter Signs
4- Seller Releases Full Pop With Fresh Sgs Report
5- Buyer Makes Full Payment Via Mt 103
6- Seller Transfers Title To Buyer
7- Buyer Pays Commission To Intermediaries
8- Seller Issues Spa Contract For 12 Months
Platts {-} Minus 50 U$d Nwe And U$d 10.00 Commission Payable By The Buyer. Hence Net Cost To
The Buyer Will Be Nwe Platts {-} Minus 40 U$d
Product: En590-10ppm
Quantity: 100,000 Mt
Availability: Fob Rotterdam {vopak Tank/s}
Monthly Deliveries In Annual Contract
Conditions: Ncnda { Attached} And Intermediary Services CONTRACT {ATTACHED} will be signed
by the Buyer once their CIS + CP is accepted by the Seller.
1. Buyer issues an official ICPO with the seller's procedure, passport copy, banking details along
with their Tank Storage Agreement "TSA".
2. Seller issues their Commercial Invoice "CI" to the buyer, Buyer signs and returns the commercial
invoice to the seller along with an Acceptance Letter of the sales and purchase procedure.
3. Seller verifies the buyer's storage facility and their Tank Storage Agreement (TSA) with the port
authority. (NB: Seller will issue a Tank-to-Tank Injection Agreement (TTIA) to be signed by all
parties only if buyer's TSA is engaged, not active or cannot be verified with the local port
authority).
4. Seller issues all POP documents below to the buyer upon a successful verification and approval
of the buyer TSA or after receiving the TTIA fully signed by all parties:
a. Injection Report.
b. Product Passport.
c. 24 Hours SGS Report.
d. Product Certificate of Origin.
e. Tank Storage Receipt (TSR).
f. Authorization to sell and collect.
g. Unconditional Dip-Test Authorization.
h. Product Title Holder Transfer Agreement.
i. NCNDA/IMFPA.
5. If required buyer may inspect by SGS (Dip Test In Tanks) at buyer's expense.
6. Upon successful verification of POP or Dip Test in the seller's tank, buyer provides Tank Storage
Receipt (TSR) to seller in order to issue the scheduled Injection Programming (IP) to be signed by
buyer storage facility and then injects the product into buyer's tanks.
7. Buyer makes the payment for the product via MT103, seller transfers the Title Holder &
Ownership of the product to the Buyer.
8. After successful Trial Lift (First Lift), Seller issues SPA/Contract for 12 months with R&E to
Buyer for processing.
9. Seller pays commissions to all intermediaries involved, for the initial lift and all subsequent lifts
according to the signed NCNDA/IMFPA.
Vopak to Vopak deals prices EN590 10 ppm US$ 540/MT, Jet fuel A1 is $82/bbl
Procedure as follows:
*VOPAK TO VOPAK*
*ROTTERDAM ð??³ð??± HOUSTON ð??ºð??¸*
ð??¢ï¸? *EN590 10PPM*
NON SANCTIONED
*PRE QUALIFICATION STEPS*
1. Buyer to provide CIS
2. Upon acceptance, Seller details will be provided for issuance of ICPO
*PROCEDURE*
1. BUYER to issue ICPO addressed to SELLER for verification and approval
2. SELLER to issue CI. BUYER signs and returns CI within 24 hours
3. SELLER to issue Authorization to BUYER for BUYER's Vopak Terminal Manager to communicate with SELLER's Vopak Terminal Manager to verify the existence of the products.This is to allow BUYER to verify fuel is real
4. After confirmation from BUYER's Vopak Terminal Manager, BUYER's Vopak Terminal Manager submits below documents to SELLER's Vopak Terminal Manager:
* Vopak Terminal Agreement or Vopak Reference Code
* Vopak Barcode
5. BUYER finalizes the Vopak Terminal Protocols
6. SELLER to issue Full POP documents to BUYER's Vopak Terminal Manager and injection begins
7. Upon completing the injection, BUYER makes full payment via MT103 TT and SELLER transfers title to BUYER
8. SELLER pays commission to its own intermediaries until the Contract is complete along with all rolls and extensions.
EN590 FOB TTV Seller Procedure
Origin : Kazakhstan
Loading port: Singapore port
UNIT PRICE : USD 490/MT
PAYMENT TERMS : MT103
TRANSACTION TERM : FOB
1. Buyer accepts seller working procedure and issue ICPO
2. Seller's issues commercial invoice (CI), Buyer signs and returns back commercial invoice.
3. Seller issue TSR with GPS coordinate to Buyer Company,
4. Buyer contacts the Seller's storage facility for tank extension to enable Buyer approval to gain access to the facility and execute the Quality & Quantity Inspection in Seller Tank Farm for FRESH Analytical Report/Result by SGS. ( Note* One day extension fee is 78,000 usd and will be deduct when buyer is paying total amount )
5. After successful DIP test, (NCNDA/IMFPA) will be signed by all parties.
6. Seller injects product into Buyer's vessel or injects into Buyer's tanks Buyer or buyer take over the storage tanks, within maximum 48 hours Buyer pays via MT 103/TT for the spot transaction and seller issues all export documents to buyer.
7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer.
Available stock in Rotterdam tank farm for jet fuel A1:
CI DIP AND PAY FOB PROCEDURE
1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer.
2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice.
3.seller will provide the Proof of Product (PPOP) documents for product verification Which include
Tank Storage Receipt (TSR)
Certificate of origin
Statement of Product Availability,
Authorization to Verify (ATV), and
Dip Test Authorization (DTA) Letter.
4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule.
*Or*
Buyer must have a minimum of 10 days TSR to avoid one day tank extension.
5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).
1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer.
2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice.
3.seller will provide the Proof of Product (PPOP) documents for product verification Which include
Tank Storage Receipt (TSR)
Certificate of origin
Statement of Product Availability,
Authorization to Verify (ATV), and
Dip Test Authorization (DTA) Letter.
4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule.
*Or*
Buyer must have a minimum of 10 days TSR to avoid one day tank extension.
5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).
EN590 10ppm & Jet Fuel A1 available .Tank to Tank procedure :
TRANSACTION PROCEDURES FOR FOB â??TTTâ??
(TANK-TO-TANK)
1. Buyer issues ICPO together with tank storage agreement (TSA) for
seller approval.
2. Seller issues Commercial Invoice (CI), ICC WARNING LETTER for the
available product quantity in the
storage tank in the terminal port.
3. Buyer signs and then returns the commercial invoice with NCNDA/IMFPA
signed by all buyer Groups
with commission structures.
4. Seller Issue (3 DAY unconditional Dip Test Authorization (DTA) to be
endorsed by Sellerâ??s Company,
Buyerâ??s Company and Buyerâ??s chosen Logistic Company. Upon confirmation
of the signed unconditional
Dip Test Authorization (DTA) by both parties, Seller programs the
injection and then issues buyer the
following documents.
A.FRESH SGS REPORT INSPECTED IN LOADING TERMINAL PORT.
B.TANK STORAGE RECEIPT (TSR) WITH GPS COORDINATES).
C.AUTHORIZATION TO VERIFY (ATV).
D.INJECTION REPORT SHORE TANK.
E.CERTIFICATE OF ORIGIN.
F.AUTHORIZATION TO SELL & COLLECT (ATSC).
5. Buyer upon physical verification of the product and PPOP
confirmation, contracts SGS to conduct the
Dip test in Seller Storage Tank on Buyerâ??s expense.
6. Upon successful Dip Test, Buyer presents the tank storage receipt
(TSR).
7. Seller commences injection immediately into buyer tank and â??issues
buyer Title of Ownership
Certificate to be followed by all export Documentation.
8. Buyer makes payment by MT103 or TT wire transfer for the total
product and lifts the product, andseller pays all
intermediary involved in the transaction
Product: Jet A1 fuel
Origin: Kazakhstan
QTY: Trial 2million BBL Followed by any qty per month X 12months contract.
Product: Diesel fuel EN590 10PPM
Origin: Kazakhstan
QTY: Trial 100,000. MT Followed by any qty per month X 12months contract.
FOB TRANSACTION PROCEDURES FOR TANK TO TANK DIP& PAY
1) Buyer issue ICPO containing the seller's working procedure and banking details along with company registration
certificate, buyer data page of buyerâ??s Passport with buyerâ??s Nominated TSA for refinery verification and approval.
2) Seller issues commercial invoice (C.I.), buyer signs and return commercial invoice along with an acceptance letter.
3) Seller issues a copy of SGS Report to buyer's Tank Farm Company only to verify SGS Report with a Confidentiality &
Non-Circumvent letter.
4) Upon confirmation of SGS Report by Buyer's Tank Farm Company, Seller request to leases and pays the buyerâ??s tank
for 2 days, and Buyer pays his Tank Farm Company for 3 days after Tank Farm Company confirms the payment from
Seller. A total (5) days of operational TSR will be issued on seller/buyers name for a minimum of XXXX to XXXX GALS /
BBLS / MT.
5) Sellerissuesfollowing POP documentsto buyer:
A. Q&QReport
B. Pre Injection Report(Fromrefinery reservoir to leased tanks)
C. Unconditional Dip test authorization letter (DTA)
D. Authorization to sell
E. FreshUpdate SGS Report
F. Certificate ofOrigin
G. Authorization to verifyphysically the productin seller's tank(ATV)
6) Buyer and his testing teams conducts Dip test on the product and injection commence from seller's tank to buyer's
tank.
7) Upon completion of injection, seller issues full Injection reportto buyer and buyer makes 100% payment via MT103
for the total value of product injected into the tanks.
NOTE: The refinery will provide NCNDA/IMFPA immediately after step No.4 of the procedure.
We offer premium quality non-sanctioned Diesel EN590 10ppm in compliance with Euro 5 standards
Product is available in bulk shipments from our suppliers based in Fujairah / Rotterdam with CIF or FOB options to global ports including Rotterdam India China and Africa
All documents SGS inspection and origin certification provided
Competitive pricing and secure procedures guaranteed
Available volumes up to 100,000-500,000 MT monthly
We have contact with several refineries and have therefore access to any type of fuel (Jet Fuel, D6, EN590, LNG, Pet Coke etc.) The refineries offer FOB and CIF at good market prices. If you have any questions, please contact me.
200.000 tons
EN590 10 PPM
non sanctioned product
price
usd 580 per ton gross
usd 570 per ton net
FOB Rotterdam
PROCEDURES (TANK â?? TANK)
1. Buyer sends ICPO on receipt of Soft Offer along with Tank Storage Agreement (TSA) as proof of
storage tank availability.
2. Seller verifies and issues Commercial Invoice (CI) for available quantity in the Storage Tank to include
the product specifications along with: -
*Product Passport Analysis
*Commitment to Supply
*Certificate of Origin
3. Buyer signs and returns CI to Seller along with ATV approved by their logistics company for Seller
Verification purpose
4. Upon receipt of the signed CI and ATV, Seller verifies and issues the POP documents: -
*Fresh SGS Report
*Dip Test Authorization (DTA)
*Loading Port Injection Report
*Tank Storage Receipt/Reservoir Receipt
*Authorization to Sell and Collect (ATSC)
*NCNDA/IMFPA Agreement
5. Upon successful verification of the POP documents, Buyers orders SGS report to conduct Dip test on the Product in sellerâ??s tank at buyerâ??s expense
6. Following the completion of the Dip Test with results consistent to the specifications on the CI, Buyer provides ATI and Seller injects fuel into Buyer's leased storage. Seller submits the full Injection report to
the Buyer.
7. Buyer makes 100% payment by MT 103 TT wire transfer for the total product and Seller pays
commission to all Intermediaries involved in the transaction within 24 hours after confirmation of
Buyerâ??s payment
8. Buyer reviews and approves the SPA and issues SLBC/DLC for 12 monthly Shipment value and
Documentary Letter of Credit or Standby Letter of Credit for length of contract and for each lift per
schedule. Buyer pay after dip test by MT103 wire transfer on each monthly quantity
RELIABLE ENERGY SOLUTIONSPREMIUM EN590 DIESEL FUEL FOR GLOBAL SUPPLY
We deliver high-quality energy products to meet the growing demands of industries, transportation sectors, and international markets. Our flagship productEN590 Diesel 10 ppmis trusted worldwide for its purity, efficiency, and compliance with international environmental standards.
Why Choose Our Energy Products?
International StandardsOur EN590 diesel contains ultra-low sulfur (10 ppm), fully compliant with European and global specifications.
High EfficiencyEngineered for modern engines to ensure clean combustion, better performance, and reduced emissions.
Reliable & Consistent SupplyWe offer bulk export with professional logistics and timely delivery.
Complete DocumentationSupplied with COA, MSDS, and optional SGS inspection for transparency and quality assurance.
Environmentally ConsciousSupports a cleaner energy future with low-emission, high-efficiency fuel solutions.
EN590 10 PPM is a high-quality ultra-low sulfur diesel (ULSD) fuel that meets international standards for automotive diesel. With a sulfur content of just 10 parts per million (ppm), this fuel is environmentally friendly and designed to perform efficiently in modern diesel engines.
We ANA COMPANY are direct authorized suppliers of petroleum products such as Class 54 and Class A1 jet fuel, D2 Diesel, Virgin D6, LCO, AGO, BITUMEN, JP54, D6, MAZUT, LNG, LPG, ESPO, EN590, JETA1, JETFUEL, UREA 46%, GASOLINE, GAS-OIL and other petroleum products. CIF, FOB, TTO and TTV ORIGIN ; KAZAKHSTAN, OMAN, KYRGISTAN. basis you or your buyer are interested and have accepted the terms, you should send an official ICPO as soon as possible to close the deal.
We also have a reputable tank warehouse available to buyers and sellers worldwide to provide warehousing services for all types of petroleum products and FOB Spot transactions. Our warehouse terminals are available in Houston, the port of Rotterdam in the Netherlands and enable the safe transport of goods to any port in the world.
Please contact us via the channels below for further information.
Ready EN590 , FOB ROTTERDAM , 100-200,000 MT
price gross usd$670/ net usd$660
comission usd$10 ( buyer side $5/seller side $5 )
dip and pay 100%
no payment whatsoever before success dip test cargo
1. BUYER issues ICPO after receiving SCO
2. SELLER issues SPA and Commercial Invoice (CI). BUYER Signs CI and returns to the Seller with the TSA/CPA and information letter issued by bank buyer
3. SELLER issues to the BUYER below documents:
a) Official invitation letter top table meeting and inspection cargo and document
b) Allocation Certificate. c) Product analysis Report
d) ATV ( authorization to verify ) there is endors by port authority and tank storage company
e) Injection reports
f) DTA already endorses by the owner of the cargo and tank storage company , port authority
g) Pass permit issued by port authority to enter and invitation letter by tank storage company for enter do dip test
h) Clearn code
i) SGS report tank injection
j) TSR (tank storage receive)
k) Authorization to sell and collect
l) Statement of product availability
m) Commitment letter to supply
o) Certificate of origin
4. Sellerâ??s bank approves signed DTA along with FRESH SGS Report to BUYER to conduct Dip Test in Sellerâ?? sâ?? vessel
or Tank storage
5. Buyer conduct dip test cargo in Sellerâ?? sâ?? vessel or Tank storage
6. Buyer succes dip test cargo buyer pay 100% total cargo via TT WIRE MT103
7. SELLER Change title of the product in BUYER name
8. Seller pays comission imenditiary
9. Continue process transaction long term
1015 Pmr Fob Fujairah And Rotterdam En590 Suppliers
Short on time? Let Pmr Fob Fujairah And Rotterdam En590 sellers contact you.
