Find Verified Modbus To Dp Gateway Protocol Converter Suppliers, Manufacturers and Wholesalers

MODBUS-RTU master station, comply with MODBUS-RTU protocol
Electrical interface connected with Modbus device supports TTL level
Set MODBUS-RTU slave station via parameters provided by GSD file


Company Information
Microcybers production center is 1700m2, with anti-static ground, ventilating system, air source transporting system, temperature and humility control system and production devices. The production center consists of 4 workshops and 1 professional lab, they are: production workshop, assembly workshop, ageing workshop, maintenance workshop and product lab. There are professional production line, pressure transmitter assembly line, instrument assembly line, control system module assembly line and product testing line. Microcyber has the batch capacity for 10 thousand devices per year.

Contact: amily[at]veecom dot com dot cn

GVE-Tplus is an upgrade of GVE-T. It is based on the ASIC circuitry design technology. It is a multi-functional, multi-purpose E1/G.703 to V.35 and LAN three-in-one multiplexer, which is also knowns as the three-in-one interface converter.

GVE-Tplus can not only be set up into GVE-T, but also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N*64Kbps(N=1--31). The work mode can be either internal clock and slave-clock, or N*64Kbps(N=1--31) external clock to achieve end-linking line.

GVE-Tplus can be set up into long-range Ethernet bridge from V.35 to LAN interface. With low cost, it is suitable for use in bridge connection which is sensitive to cost or use in LAN as a stretcher or subsection. It can learn automatically MAC address in the connected LAN and only transmit the aim address to frame in another LAN. There are more than 10000 addresses in its LAN table. And they can be updated automatically. The highest speed of filtrating and transmission is 30000 frame/second(line speed). The buffer size is 64M. The throughput delay is 1 frame. When it is used as a stretcher or subsection, it can forbid filtration so that all traffic can be broadcasted in WAN. 10baseT interface can run in full duplex Ethernet with topology and improve data throughput by eliminating filled blanks in the 64 bytes frames. Without any negotiation in V.35 port, it is specially suitable for use in satellites and other wireless broadcast.




245mm*215mm*50mm

Industrial Gateway Protocol Converter
Fieldbus Modbus to HART Gateway
Fieldbus HART to Modbus Gateway

Clients can order online from our website.
Wj102-232/485-rj45 : multifunctional serial server module
Two years warranty, ce approved
Product features:
>>modbus rtu protocol automatically converted into mobus tcp protocol
>>100m high-speed lan, 10 / 100m adaptive ethernet interface
>>support auto mdi / mdix, you can use a crossover cable or parallel cable connection
>>rs232 baud rate can be set from 300-256000
>>working mode selectable tcp server, tcp client,
Udp mode, udp server mode
>>supports virtual port mode
>>across the gateway, across switches, routers
>>can work in lan, you can also work on the internet (extranet)
>>working port, destination ip address and port can be easily set
>>flexible serial data sub-frame is set to meet user demand for subcontracting
Product overview:
Wayjun wj102-232/485-rj45 is a industrial protocol converter between rs232/485 and tcp/ip. This server uses the tcp port network packets or udp packets and rs232 or rs485 interface data to achieve transparent transmission, achieve transmission, serial servers so that you can easily connect serial devices to ethernet and internet, network management of serial devices. And compared to similar products, its distinguishing feature is the stability of full-duplex, non-stop sending large amounts of data without losing a byte.

G1013 HART to FF Gateway, designed by Microcyber Corporation is a gateway device for HART protocol and FF protocol. As HART master, G1013 HART to FF Gateway communicates with HART slave via HART interface, it can convert dynamic variables in the device to FF device variables output.

Product Description

Provide FF H1 communication ability to HART device

Support standard DD or EDD specification (FF H1)

Electrical interface connected with HART device

Supports FSK(1200bps)
G1013 HART to FF Gateway is 9922.5114.5mm, supporting standard DIN rail installation.

G1013 HART to FF Gateway is powered by FF bus, and the HART part shall be with 24V external powered. The recommended is TP cable, and it shall improve devices anti-electromagnetic interference ability.

G1013 HART to FF Gateway, designed by Microcyber Corporation is a gateway device for HART protocol and FF protocol. As HART master, G1013 HART to FF Gateway communicates with HART slave via HART interface, it can convert dynamic variables in the device to FF device variables output.

Product Description

Provide FF H1 communication ability to HART device

Support standard DD or EDD specification (FF H1)

Electrical interface connected with HART device

Supports FSK(1200bps)
G1013 HART to FF Gateway is 99Ã?22.5Ã?114.5mm, supporting standard DIN rail installation.

G1013 HART to FF Gateway is powered by FF bus, and the HART part shall be with 24V external powered. The recommended is TP cable, and it shall improve devices anti-electromagnetic interference ability.

Physical Parameters

Bus signal: compliant with IEC61158-2 physical layer standard

Bus power supply: 9 ~ 32V

Operating temperature: -40 ~ 85°C

Static current: â?¤14mA

Humidity range: 5% ~ 95%,non-dew

Mechanism size: diameter 66mm(can be customized)



Supportive MODBUS Communication Parameters

Address: 1 ~ 255

Baud rate: 9600 / 19200 / 15625 / 31250 /62500 / 125000 bps

Data bit: 7 / 8 bits

Calibration: odd / even calibration

Stop bit: 1 / 2 bits

CRC calibration: low byte ahead / high byte ahead

Data format: support various data formats



Supportive MODBUS Function Code

Function Code 1: read loop status

Function Code 2: read discrete input status

Function Code 3: read keeping register value

Function Code 4: read input register value

Function Code 6: write loop

Function Code 16:write multiple register values

This device MINI DP to 2 port HDMI converter is to turn the DP signal into two routes of HDMI Signal output. The converter allows one DP devices to be split easily to two HDMI compatible monitors or projectors.

FEATURES
One MINI DP signal input converter and split to two HDMI signal output.
Support 3D
Support deep color 24bit,30bit, 36bit
Support 24/50/60fs/HD-DVD/xvYCC
Digital audio format, as DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
Support signal retiming
Support output up to 20metres AWG26 HDMI standard cable length
No loss of quality
Installs in minutes
Need DC5V/1A power supply

Product Description
FE1/V.35 Protocol Converter provide conversion between ITU-T G.703 standard E1 interface and standard V.35/V.24 interface, can convert E1 channel of SDH, PDH, and other Optical Transmission Equipment or microwave, satellite Equipment to V.35/V.24 channel, Extend V.35 channel of DDN. Used widely in data communication networks, Connecting with V.35/V.24 interface of Routers and Optical Transmission Equipments without G.703 interface, realize match between different network equipments, and transparent to upper protocol layer.
Technology Characteristics
-> Bandwidth range is 64Kbps-2048Kbps Realize data of V.35 transparent transport in the E1
-> Support all kinds of loop function, for testing and opening conveniently
-> Support network function, monitor operation condition of facilities
-> Support E1 interface of unbalance 75ª+ and balance 120ª+
-> Be possession of testing function of E1


-> Support ITU-T G.703íóG.704
-> HDB3 line coding, comply indication output of route warn
-> Coding rate : 2048Kbpsí+50ppm
-> 75ª+ physics interface use BNC standard coaxial connector, 120ª+ physics interface use RJ45 connector
V.35 Interface:
-> Interface Mode : DCE
-> Interface Type : DB25
-> Rate : 64Kbps-2048Kbps
General characteristics
-> Power : 220Ví+20% , -36 ~ -72V
-> Power Consumption : < 5W
-> Environment Temperature : 0íµ-50íµ
-> Size : 220í-165í-35mm
-> Net Weight : 900g
Packing List
-> FE1/V.35 Protocol Converter
-> One Power cord (Note : -48v no with power cord)
-> Two BNCs Coaxial Connector
-> One conversion cable of DB25-M34
-> Manual book

Product Description
The E1 to Ethernet protocol Converter is a device that extends Ethernet by means of telecommunication lines (E1 or E1 transport network, such as PDH, SDH, or microwave, etc.) and is also referred to "Net Bridge".It can effectively utilize free bandwidth of telecom operators' lines and can be used instantly once it is deployed, with little increased investment.
Technology Characteristics
-> Transparent transmission of Ethernet data through E1 lines at 2048Kbps bandwidth
-> Plug and play, without any setting or debugging work
-> Support automatic negotiation feature in Ethernet and full duplex/half duplex mode
-> Support transmission of Jumbo Frames specified in IEEE 802.1Q and Ethernet switches with VLAN capability
-> Local data frame filtering
-> Provide unbalanced 75ª+ and balanced 120ª+ E1 interfaces


E1 Interface:
-> Support ITU-T G.703
-> HDB3 line coding, comply indication output of route warn
-> Coding rate : 2048Kbpsí+50ppm
-> 75ª+ physics interface use BNC standard coaxial connector, 120ª+ physics interface use RJ45 connector
Ethernet Interface:
-> Fully IEEE 802.3 (2000) compliant
-> Bit rate: 10Mbps or 100Mbps
-> Interface type: RJ45
General characteristics
-> Power : 220Ví+20% , -36 ~ -72V
-> Power Consumption : < 5W
-> Environment Temperature : 0íµ-50íµ
-> Size : 220í-175í-35mm
-> Net Weight : 900g
Packing List
-> V.35/Ethernet Protocol Converter
-> One Power cord (Note : -48v no with power cord)
-> Two BNCs Coaxial Connector
-> Manual book

The fieldserver is one of the most powerful and flexible industrial protocol translator currently in the market today. A protocol translator with over a 120 protocol supported, an ethernet gateway, a port expander, a scanner and a tunneling devices its no wonder that this product is becoming the standard.

The S4 Group provide protocol gateways to JCI's Metasys N2 networks which automate the labour of mapping points to the other protocols.

1.Modbus-RTU protocol to HART protocol
2.Support 6 device variables and 4 dynamic variables
3.Support Modbus communication parameters dynamic configuration
4.Support HART multipoint mode
5.Support 375/475 communicator

Description
Hdmi and vga interface could be found on most tv, monitors, and displays.
This mini displayport adapter enables you to extend your mac system by one hdmi or vga interface.
It contains 2 chipsets, and supports both digital and analog signal.
By connecting an additional monitor, you can also mirror or extend the display of your mac.
Specification
1. Connector: mini displayport 20 pin male > hdmi / vga female
2. Mini displayport 1.1a standard
3. High speed hdmi
4. Resolution up to 1920 x 1200 and hdtv up to 1080p

Description
Hdmi and vga interface could be found on most tv, monitors, and displays.
This mini displayport adapter enables you to extend your mac system by one hdmi or vga interface.
It contains 2 chipsets, and supports both digital and analog signal.
By connecting an additional monitor, you can also mirror or extend the display of your mac.
Specification
1. Connector: mini displayport 20 pin male > hdmi / vga female
2. Mini displayport 1.1a standard
3. High speed hdmi
4. Resolution up to 1920 x 1200 and hdtv up to 1080p

R10 is not only an industrial-grade router, but also supports programmable logic control, customized applications, and replaces PLC. Used as Modbus RTU/TCP Master to collect data, convert Modbus to MQTT protocol, Transmit Transparently (Pass-through), and directly connect to cloud platforms such as AWS\THINGSBOARD etc.

Modbus-DP built-in module realizes the connection from Modbus RTU device to PROFIBUS DP network .It realizes the conversion function from MODBUS Protocol to PROFIBUS DP Protocol. Only by simply operating Modbus configuration tool, the users can realize connection from Modbus RTU device to PROFIBUS DP network.

M0306 module works with DIP16 2.54mm standard interface, 3.3 V power supply, Modbus communication indicating light to quick diagnosis the device status. It uses simple convenience

Combining with the features of high reliability and high flexibility, M0306 module is an ideal choice for user to develop OEM devices with PROFIBUS DP protocol.

Model:S278
Name: Cellular IoT Modbus Gateway
The Cellular IoT Modbus Gateway is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, integrated 1 Industrial 10/100M adaptive Ethernet module inside and inbuilt industrial Cellular module. It provides 4 digital inputs, 2 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity, and RS485 serial port, performs as Modbus RTU Master Supports extend maximum 320 mapping registers. It can monitoring and operates the I/O ports by SMS, APP, Web Server, internet, timers and programmed inter-lock events automatically.

The Cellular IoT Modbus Gateway supports transparent data transmission and performs as Modbus Slave over GPRS/3G/4G/NB-IoT network and RS485 serial port. Moreover, the Cellular IoT Modbus RTU can be used as Modbus RTU Master to reading smart meters, I/O modules, PLC, and converts to SMS alert once triggered the threshold value, or transmit data to remote server over GPRS/3G/4G/NB-IOT network.

Main Featuresï¼?
1. Can be operated from anywhere, no distance limitation;

2. Quad band 850/900/1800/1900Mhz GSM GPRS Module inside.

3. 3G/4G/NB-IoT Modules are optional;

4. Modular design, can easily upgrade the cellular module if network upgrade;

5. Embedded ARM® Cortex�-M4 32 Bit RISC Core, 168 MHz inside, RTOS system, reliable performance with in-built watchdog;

6. Wide range power supply 9~36VDC with over voltage and phase-reversal protection;

7. 4 digital inputs, compatibles dry and wet contact, one of it can be used as pulse counter;

8. 2 relay output (5A/30VDC, 5A/250VAC), compatibles pulse outputs;

9. 1 ambient sensor input for monitoring onsite temperature and humidity;

10. Inbuilt inter-lock logic programmer and powerful timer program function;

11. Resend the data while communication failure and alert to users by SMS;

12. Inbuilt TCP/IP protocol stack, supports cloud, APP and web server applications.

13. Supports Modbus TCP protocol, can integrate to SCADA,HMI,DSC directly.

14. Integrated 1 Industrial 10/100M adaptive Ethernet module inside, supports Modbus TCP;

15. 1 RS485 port supports Modbus RTU Master, supports max. 320 mapping registers, can be used to extend I/O ports or meters;

16. Supports SMS Alert when I/O triggered or recovery, and external power lost or recovery;

17. Provides 1 channel 9~36VDC power source output for external device, saving wiring cost;

18. Up to 10 SMS Alert and dial numbers, can program to receive specified alarm message.

19. Inbuilt 4M internal memory to save historical data and events;

20. Inbuilt large capacity automatically rechargeable backup battery;

The Lora Gateway S281 is the latest Lora technology for industrial internet of things solutions. It supports upto 99 wireless temperature humidity modules, and 99 wireless serial port modules with a monitoring radius of upto 2500m.it is widely used in agricultural greenhouse temperature and humidity collection and monitoring, chemical plant temperature and humidity collection and monitoring, electroplating plant temperature and humidity collection and monitoring, hospital sites and fruit and vegetable storage warehouses and other places temperature and humidity collection and monitoring. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution.
Supports 10 user numbers for receiving device daily reports, dropped calls, serial port data overrun, and specific SMS alarm messages triggered abnormally;

Built-in powerful timer function, support timing automatic reporting, timing SMS daily report, timing online, timing restart and other functions;

Modbus TCP protocol and Modbus RTU protocol are compatible with transparent transmission;

Ethernet comes with a transformer isolator, 2KV electromagnetic isolation, and shell isolation protection;

Adopt time division multiplexing, multi-channel mounting, less interference, more mounting nodes, can support up to 99 temperature and humidity collection points

It can monitor the terminal battery level in real time to ensure that the device data does not drop.

Provide FF H1 communication ability to Modbus device

Support standard DD or EDD specification (FF H1)

Electrical interface connected with Modbus device

supports TTL level, RS485 and RS232



G0313 Modbus to FF Gateway is a gateway device of Modbus protocol and FF protocol developed by Microcyber. As Modbus master station, G0313 Modbus to FF Gateway communicates with Modbus-RTU device via RS485 interface, and it can convert the data of Modbus-RTU device to FF device variable output.

G0313 Modbus to FF Gateway size is 99Ã?22.5Ã?114.5mm, and supports standard DIN rail installation.



There is a 3-bit DIP switch for G0313 Modbus to FF Gateway, shown as the following Figure.

SIM: Simulation switch, used for simulation function.

WP: Write protection, all the write operation for FF smart pressure transmitter shall be refused, which avoid data modification at random.



RST: Reset, reset device date to factory original. Power off the device at first, and made the switch at ON, and then power on the device, the device shall be reset to factory original.
Modbus to FF gateway is a gateway device supporting Modbus and FF protocol. As FF device, it can communicate with Modbus devices, read Modbus data to FF device by simply configuration, and transfer data to control system through FF bus.
Modbus to FF Gateway supports 4 Modbus slave devices, 8 groups of analog input output and discrete input output parameters, totally 32 channels provided. It configures Modbus devices data into transducer blocks parameters via Modbus register, and provides data support for FF system via channels between variables and AI, AO, DI and DO function blocks.

Product Overview

G1003 gateway realizes protocol converting from HART to Modbus RTU / ASCII. Supporting to connect multi HART slave devices into Modbus network. In the gateway, HART terminal is master station, Modbus terminal is slave station.



Features

Be tallied with HART7.0
HART master and Modbus slave mode
4~20mA analog signal overlay HART digital signal
Support 15 HART slave device
Configure gateway by special software
Write protect user data
RS485 Modbus interface
LED power and communication indicating
Standard DIN rail installation