Introduction
Single-meter cng flow meters meet the challenges of measuring compressed natural gas for custody transfer in light- and heavy-duty vehicle dispensers while reducing fill time with higher flow rate capability.
Specifications
Gas accuracy / repeatability
±0.50% of batch (0.25% of rate)
Line size
1/2 3/4(dn15 dn20)
Pressure range
5000 psig (345 barg)
Temperature range
-40 to 257 f ( - 40 to 125 c)
Electronics (soft)
Expansive i/o options including ma, frequency, discrete input/output , hart, modbus, ethernet/ip, foundation fieldbus
Turndown
10:01
Features
Satisfy needs for light- and heavy-duty vehicle dispensers with a purpose-built, single-meter solution
Use with most fluids with available 316l stainless steel construction
Choose from a wide range of transmitter options, including direct-connect, to accommodate dispenser design requirements
Broad range of meter approvals and certifications, including; csa (class 1 div 1 groups c and d, class 1 div 2 groups a, b, c and d, class ii div 1 groups e, f and g), atex, nepsi, iecex, ingress protection 66/67, and namur
Save time with a compact design with no moving parts, requiring no special mounting or flow conditioning
Rely on custody-transfer-approved certification
Mtcmf coriolis mass flow meter are suitable for measuring all liquids and gases. The measurement is
Independent of changes in process conditions and parameters such as temperature, density, pressure,
Viscosity, conductivity and flow profile.
Rbcm coriolis masas consisted of a pair of bended tubes. The principle is to detect coriolis force forced a pair of tubes from inner mass flow by fluid. Rbcm coriolis mass flow meters offer direct mass flow, volume flow, density, and temperature measurement of liquids and slurries ¡ª without the need for additional equipment, manual calculations, or estimations.
Features
Measurement medium: liquid, gas, solid, or two phases and three phases mixed fluid
No moving parts, high reliability and durability
Measurement of mass flow, density, temperature and volume flow
Free of dead spots
Temperatures up to +350
Work pressure º(0~32) mpa main technical parameters
Type - Other Watering & Irrigation
Model Number - IR161020-2
Material - Plastic
Diameter - 16 MM
Wall thickness - 1,0 MM
Flow rate - 2 lph
Packaging - 400 meter
Dripper spacing - 20 CM
Feeder of Raw meal includes steady flow feeder, mass flow meter, gas-solid injector and FB-DACS5000 control system. It has a great effect on improving the stability of kiln working conditions, improving the working time and clinker strength, saving energy and prolongs the service life of refractory materials.
Accuracy: +/- 0.5%
Weighing Range: 100-1200 m3/h
Garnet is pure and natural sand. Of the six major varieties of Garnet (Almandine, Andradite, Grossularite, Pyrope, Spessartite, Uvarovite), Almandine is the best abrasive Garnet with the composition of 3FeO, AI203, ESIO2. As Garnet has low content of free silica in it, it is widely used in sand blasting and waterjet cutting.
Applications
Abrasives
Sand Blasting
Water jet cutting
Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast. Smaller and longer than a bloom, billets are usually a square cross-section less than 36 square inches.
They are used for the manufacture of all ‘long’ steel products such as bars, rods, pipes, tubes, wire and wire products.
India is World’s Second largest Cement Producer. India is contributing tremendously to the Supply of Cement across the Globe. The Capacity of Indian market to produce and supply cement is increasing at swift pace.
We source the best quality and from the best brands. We supply OPC, PPC, Slag cement, White Cement and Sulfate Resisting Cement.
Micro Silica also known as Silica fume. It is a by product of producing silicon metal or ferrosilicon alloys in smelter using electric arc furnaces. It is a grey coloured powder, pozzolanic in nature.
Applications
Concrete Industry
Refractory
Rubber Industry
Anti caking agent
Pellet Binder
Lime stone is a fine powder obtained from the processing of Limestone. It can be added to Portland cement as an addition, wither at factory to create a composite cement or at the batch plant to form a combination cement.
Granulated Blast Furnace Slag or GBFS is formed when Blast Furnace Slag or BFS is successively at a fast rate quenched from the furnace rather than left for cooling. It has a density of about 60% to 70% that of natural sand. This material has a much increased resistance to sulfate attack.
This eventually leads to better performance in countering acids of any type. In GBFS, no type of reaction related to alkali and silica occurs. Also the material provides a huge saving in connection to carbon dioxide emission which is an extra boon. What constitutes GBFS are its properties that consist of durability, appearance, higher ultimate strength than concrete which is made up of Portland cement and high sustainability level of the product made out of this material.
Fly ash, also known as flue-ash is a residue which is generated during combustion and consists of fine particles. There are impurities in coal which mostly consist of clays, limestone and dolomite particles. These turn up into ash as they cannot be completely burned.
Fly ash is useful in a number of ways and is one of the most researched upon mineral source. It is mainly a pozzolanic substance which contains aluminum and silicon material which in return due to the presence of water can take form of cement.
A lot of research and development initiative have been taken place across the globe to build and develop technologies that can utilize the full potential of fly ash. Royal Mineral takes care to ensure flawless production stages.
China clay belongs to the group of Minerals called Kaolinite. It is one of the most common minerals. Kaolinite clay occurs in abundance in soils that have formed from the chemical weathering of rocks in hot, moist climates—for example in tropical rainforest areas.
Comparing soils along a gradient towards progressively cooler or drier climates, the proportion of kaolinite decreases, while the proportion of other clay minerals.
Coal is a primary source of energy, mainly burned for the generation of the electricity or heat. , and is also used for industrial purposes, such as refining metals.We supply imported (Indoseian) Coal to the domestic market.
Iron ore is the main raw material that is used in the manufacturing of steel. 98% of the mined iron ore goes in the steel production. India has rich deposits of Iron Ore and is among the top 10 exporter of iron ore in the world.
Quartz is very common in sedimentary rocks such as sandstone. It is composed of Silicon and oxygen atoms. It is closest to pure chemical compound and has constant physical properties. Quartz strength and non-reactive properties make it indispensable ingredient in the production of thousand of everyday products.
Calcite is carbonate and is generally white in colour. Calcite is a common constituent of sedimentary rocks, limestone in particular. It has the same chemical formula as other calcium carbonate based minerals like Limestone and marbles.
Calcite, like most carbonates, will dissolve with most forms of acid. Calcite can be either dissolved by groundwater or precipitated by groundwater, depending on several factors including the water temperature and pH.
Applications
Pharmaceuticals
Drilling
Iron and steel industry
2960 Micro Motion Cng050 Coriolis Flow Meter Suppliers
Short on time? Let Micro Motion Cng050 Coriolis Flow Meter sellers contact you.
