This device utilizes state-of-the-art microporous ultrasonic atomizing mesh technology that sprays liquid medication into aerosol/vapor form and delivers it directly to the patient for inhalation. Both adult and pediatric patients suffer from asthma, Chronic Obstructive Pulmonary Disease (COPD) such as emphysema and chronic bronchitis, or other respiratory diseases that are characterized by obstruction to air flow or/and patients who are on and off ventilation or other positive pressure breathing assistance.
Funtion
1.Three gear adjustable
1.It is designed for infant, child and adult who has asthma, copd (chronic obstructive pulmonary disease), or other respiratory disorders.
2.The smallest pocket size nebulizer that only weights 100 g (not including 2 íºaaí¿ batteries), and the dimensions are 11 x 5.5 x 4.2 cm.
3.It does not need to replace the filter and medicine cups, which can save a lot of cost on the replacement parts.
4.It uses the íºelectronic mesh technology" that makes dense therapeutic aerosol and assures effective and efficient delivery of medication.
Features
1.Patented micro-pump technology
2.Patented technology for low medicine residue
3.Patented technology to allow operation in all directions, up side down or slant for around 10 seconds.
4.Completely silent in operation
5.Low power consumption
6.Automatic turn off when medicine is depletion
7.10 minutes to atomize 7ml medicine (high speed rate)
8.Electronic aerosol generator
9.Mmad particle size: 5 microns
10.Capacity of medicine cup: 10ml
Product description
1-an ultrasonic nebulizer with very low noise
2-medical drug atomization
r patients to inhale oxygen simultaneously
6-superfine nebulized particles for easier absorbing by the body.
Product specification/models
Power supply :110v-60hz, 220v(230v)-50 or 60hz, 12vdc
Ultrasonic frequency: 1.7mhz
Max capacity of medicine cup:80 ml
Nebulizing rate:4ml per min to 7ml per min
Time control:machine 60 min
Particle size rate: 0.001 to 0.005 mm for 75 percent the entire volume particle distribution
Noise: less 50db(a)
Power consumption: 60 va
Packing info:
1-standard outer cartons and inner box,
2-with instruction book,
3-eco-friendly good quality materials,
4- oem, can be customized by your brand name
Portable ultrasonic flow meter enables non-contact measurement of liquid flow. By installing the sensor on the outer wall of the pipe, the flow measurement can be completed, which is convenient and accurate. Built-in printer and SD card memory for immediate or timed printing of set measurements. It is widely used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries, can be used for production testing, flow comparison, temporary monitoring, is a necessary tool for flow detection.
Ultrasonic golf club cleaner features:
1.304 non-magnetic stainless steel constructinons
2.Built-in digital generator
3.Built-in imported transducers
4.Built-in electronic counter, which record every cleaning.(can not be tampered)
5.Built-in controlled heater, temperature control range:0 to 100 centigrade.
6.Built-in digital timer that can be set in 5 minute increments
7.Token operated (one set of 100 includes), functions as a self-service vending machine.
8.Specialized tank design for cleaning full set of golf club
9.Oem service available.
Ultrasonic golf club cleaner application:
Professional for golf club cleaning
Ultrasonic golf club cleaner specifications:
Model---vgt-8000a/8000b
Frequency ---40khz or 28khz
Transducer qty.---16pcs
Power---2800w
Tank capacity---39l
Tank size ---350*300*380mm (l*w*h)
Overall size---510*585*800mm (l*w*h)
Voltage---ac 110/220v
Product Description
Ultrasonic rubber cutting principle is through the ultrasonic generator 50 / 60Hz current into 20,30 or 40kHz power. The converted high frequency electrical energy is again converted into mechanical vibrations of the same frequency by means of transducers, which are then transmitted to the cutter through a set of amplitude modulator means which can vary the amplitude. The cutter transmits the received vibration energy to the cutting surface of the workpiece to be cut, in which the vibration energy is cut by activating the molecular energy of the rubber and opening the molecular chain.
Video
https://youtu.be/rBOMOnR6ilA
Advantages
High cutting accuracy, no deformation of the compound
High speed, high efficiency, no pollution
Cutting surface finish is good, good bonding performance
Easy to use in automated production
Applications
Used in tire, cable foreskin materials, hoses, gaskets and chemical-resistant equipment lining and other rubber products, cutting.
Key Specifications/Special Features:
* Medical level massaging surface: the product adopts large part of medical level stainless steel massaging head, it friendly to skin and comfortable to use.
* Multi-functions integrated: integrated with clean, micro, refresh and warm function, the device perfectly fit for your skin care need.
* Ease to use and human engineering design: masterpiece of experienced designer, well fit for hand held to create an extreme skin care enjoyment.
* An innovative 15°import & export head design changes angles easily to align face.
Function:
* The micro vibration can accelerate the absorption of skin care products and awaken the skin with youth and vitality.
* Positive ions can remove residual dirt on the skin, and negative ions can accelerate the absorption of skin care products.
* Warmth is produced by vigorous friction of the molecules in high-speed vibration. Warmth has long been recognized for its skin-freshening and enhancing propertles,as well as its virtues in controlling pain and promoting healing. Warm care mode can expand the pores effectively to achieve the cleaning and moisture effect.
* Clean: this mode removes fine dirt remaining in pores which can not be removed just by washing and makes skin suitable for "Micro". Saturate cotton attached to the body with skin lotion after washing your face.
* Refresh: this mode allows to bring skin back under control with fine vibrations and mild switching of electrodes.Place the sheet mask on face or apply your regular milky lotion over your face evenly.Apply the head directly to the skin and move it slowly.
Voltage: 3.7V
Function mode: clean, warm, micro, refresh.
Material: ABS and stainless steel.
Duration: 2.5 hr
Power Supply: Lithium 500 mah
Control Switch: 6 min Off
Packing: 1pc/giftbox, 50pcs/ctn.
Quantity: 2000pcs
Net weight: 0.092kg
Gross weight: 0.234kg
Box size: 179x98x54mm
Carton size: 510×380×300mm
Loading quantity:
20' container: ctns
40' container: ctns
Lead Time: 35-40days
Certification: Rohs, CE
Model No.
LLD-J201
Aromatherapy
No
Style
Portable
Type
Ultrasonic
Usage
Home, Car
Certification
CE, RoHS
Humidity Control
Manual
Humidification Method
Mist Discharge
Power Type
Battery
Timing Function
With Timing Function
Water Shortage Power-off Protection
With Water Shortage Power-off Protection
Material
ABS/PP/PC
Colour
White,Grey
Water Volume
2.5L
Battery Lifespan
4.5/10h
Input
5V/1A
Power
1.5-2W
Spray Volume
50-60ml/H for Single
Unit Weight
800g
Charging Port
Type C
Trademark
No
Transport Package
Colour Box
Specification
209*192*211mm
Origin
SZ,China
Mericonn 3 modes ultrasonic Facial cleaner
EMS micro current
LED display
5 skin care modes
1.Daily cleaning,
2.deep cleaning
3.nutrition introduction
4.massage
5.lifting and removing wrinkles
Solve a variety of skin problems, dry skin is dry and sensitive, oily skin is prone to oil and acne
1. Made of quality PU leather, soft, sweat resistant, and mesh net top for better breathability.
2. Ear mesh design: also breathable and comfortable, keep your training dry and fresh, completely enough to protect the ear andreduce weight.
3. Fully protection: Forehead part: thickness of the armor is up to 30mm, cheek part: up to 34mm, chin part: up to 24mm.
4. Premium hook-and-loop straps: non-sticky, more comfortable to wear. Ultra lightweight to allow faster head movement.
5. Suitable for martial arts training so as to prevent to be injured, good strength absorption and portability.
Removing dead skin cells is very important for healthy looking skin, and the process is to reveal the newer smoother skin underneath.
The spatula can effectively removes dead skin cells and clean the pores, so its good for all skin types, imperatively for oily to combination skin; and it is suitable for sensitive and rosacea skin. The spatula could be beneficial to acne skin as it will push everything to the surface, be sure to use distilled water while treating acne with the spatula. (spray the distilled water to the treated area, then run Ultrasound Skin Spatula over it).
Another great thing about our Ultrasonic Facial Skin Spatula is that it can help water-soluble skincare products (gels, serum, ampoules) to penetrate to the skin. Keeping our skin hydrated is essential, especially for those of you who travel a lot, from one climate to another sometimes can confuse our skin. People who live in a dry climate might be easier to adapt the changes. But for someone lives in humid climate and switch to a dry environment can really challenge his/her skin. By using Ultrasonic Facial Skin Spatula, we can easily keep our skin hydrated while on the go.
Remarkable Features
Skin cleaning and dispel dead skin and skin dregs.
Able to remove dirt within pores and aging cuticle.
Improve skin quality for better lift-up, whitening and health.
Nutrition penetration, Toxins and wrinkle removal.
Repair body cells, speed up absorption of skin-care products.
Painless, cleanliness, and deep skin cleansing.
Decompose melanin, disinfect pimples and various skin problems.
Shrinking skin pores to give glossy, shiny, white and healthy skin.
Take away wrinkles and loosen skin.
Skin Massage with ion penetration to keep smooth and ageless skin.
Intelligent time control for each ten minutes treatment.
Compact and portable design with low power consumption.
A cordless device for convenient use.
Specifications
INPUT VOLTAGE : AC 90 !V 240V
OUTPUT VOLTAGE : DC 5V 500mA
Li-ion 3.7V 560 mAh
MAXIMUM OPERATING CURRENT : 600mA
OUTRASONIC OUTPUT FREQUENCY : 25KHz
NET WEIGHT : 140g
SIZE : 220 X 84 X 30 mm (8.65 X 3.3 X 1.1 inch)
The phase ii ultrasonic portable hardness testers are capable of measuring the surface hardness of a broad variety of metals on flat, round, thin or large surfaces. Unlike the standard dynamic hardness testers, these "state-of-the-art" portable hardness testers incorporate "ultrasonic uci" technology, which enables the hardness testing of very thin and small workpieces, which otherwise could not be tested accurately using a portable device. Non-destructive in it's function, these hardness testers allow for the testing of highly sensitive or finished parts that previously could not be tested in an operational setting. The non-destructive (ndt) feature of these hardness testers allow the operator to accurately test parts without causing physical or structural damage that would normally lead to disposal or refinish of operators part. That translates into less scrap parts/ lower mfg costs due to necessary inspections.
Weld trimming machine / Weld shear machine used in Aumino-Thermic welding process. Hydraulic operated double shearing head, shearing force : 18 ton, Petrol engine operated robust machine is ideal solution for weld shearing. available ex-stock. guarantee
Manufacture and Supply of Alumino Thermit Welding Kits for 52kg, 60kg, 60E1, R260, 1080HH, Combination Joint 60Kg/60E1 to R260, 115RE, 54kg, 45kg, 45E1, P43, P65, BS80, BS100, 37kg, CR100, CR120, other Crane rail & Metro rail and many more for private sidings as well as we have capability to develop Kits for other rails, includes
Alumino Thermic welding Portion
3-Piece Dry Mould
Single Shot Crucible with auto tapping thimble or Multishot crucible
Luting sand / luting paste
Igniter
Also, manufacturer and supply :
Welding Equipments and consumables
Small track machines (Engine, Battery, Electric, manual)
Ultrasonic Flaw Detection (USFD) machines
Rail Cutting disc and grinding wheels
Ultrasonic Scaler Tooth Cleaning 8W Calculus Remover Stains Tartar Scraper High Frequency Vibration
Specifications:
Product Name Digital Ultrasonic Scaler
Product Model PUS-T01
Product Size L200*W49*H32mm
Product Weight 125G
Packing Size L238*W106*H43mm
Material ABS
Battery Spec: 2000 mAh Lithium
Rated Power 8W
Adapter Voltage 5V
Ultrasonic Frequency 40khz ±2khz
Country of Origin China
Package Included:
1 x UltraSonic Dental Scaler
1 x USB Charger
1 x User Manual
Features
1.High quality alloy steel, easy to remove dental calculus, smoke stains and tea stains.
2.Ultrasonic high frequency vibration enables to erase leftovers or food debris on the teeth effectively.
3.Two adjustable vibrating speed levels meet your different cleaning needs.
4.Rechargeable battery design, USB for easy charging, convenient to carry anywhere.
5.IPX6 waterproof grade, more convenient for teeth cleaning use.
Mericonn upper rolling arm portable BP monitor blood pressure monitor for home use
Name: BP-401
Electronic sphygmomanometer. According to the measured position, it can be subdivided into upper arm type, wrist type, finger type, manual type, automatic type, etc. The utility model has the advantages of simple operation, intuitive reading, automatic measurement by simply opening the switch, and is suitable for home use.
