Data concentrator with 32 digital inputs and Modbus RTU communication
Cost-effective industrial solution for reading out the data of consumption metering devices (e.g. water, gas, electricity meters) equipped with contact or pulse output line.
Furthermore, the concentrator can connect to any kind of measurement devices, PLCs, controlling machines, data collection system, automata or a network analyzer.
The device is capable of collecting and storing data of up to 32 endpoint devices through the input lines.
The M2M Modem Plus IO® device is connected through the RS485 port to read out the input values with Modbus RTU protocol.
Connection
32x digital inputs (4 segment x 8 isolable inputs, operation mode selection by jumper)
Receiving and counting the contact/pulse signals
Dry/wet contact relay
Open collector input
Receiving the output signals as input signals (alternate wiring)
Receiving reed/hall sensor outputs
RS485 output (ModBus RTU protocol towards the modem)
Software/Configuration
Modbus protocol communication
Readout of Modbus counters, registers
PLC compatibility
Configuration software (locally on serial port)
Security
Watchdog circuit and system monitoring
Data storage into non-volatile memory
Application
Data collection and counting
Measurement and data collection systems
Forwarding industrial system or PLC data
Monitoring industrial or measurement devices
Remote control
Industrial GPRS data collection device for digital signals of industrial systems and pulse signals of residential meters
Cost-effective, C-rail mountable industrial modem for receiving digital signals and collecting pulse signals of residential meters.
The modem is capable of continuously counting the pulse signals of up to 4 meter systems.
The device transmits the calculated input signal values through Modbus TCP protocol to query servers Modbus TCP.
The queries of the data sets are performed periodically (e.g. in every 15 minutes) depending on the server value set.
When it has to receive signals from more than 4 devices, we suggest using the M2M IO/RS485 CONCENTRATOR�® which has 32 input lines.
In this case the device requests the concentrator input counter status through the modems RS485 interface, and fowards the received Modbus RTU reply through Modbus TCP protocol to query the servers Modbus TCP.
The modem can initiate queries through its RS485 interface towards several concentrators input lines.
Furthermore, the modem can switch external devices (optionally) with the help of its 2 relay outputs.
Communication
Supporting GSM/GPRS (Gemalto�® industrial module)
4 inputs (digital or pulse/voltage)
2 relay outputs (optional)
Software/Configuration
Modbus protocol communication
Modbus Gateway
Consumption meter compatibility (receiving and counting pulse signals)
Configuration software (on RS232 or RS485 port)
Extras
Memory for storage of applications, data (with ftp possibility)
External IO-expansion (optional for receiving 32 inputs per module)
Firmware upgrades (ftp server)
Safety
External battery connection (spare power supply)
Watchdog circuit and system monitoring, log
Automatic mobile network connection recovery
Application
Data collection (digital or pulse signal)
Forwarding data of industrial systems
Smart metering (remote readout)
Measurement and data collecting systems
Remote monitoring of devices
Monitoring of input lines
Remote control (optional)
Portable Printer label printer blue tooth mobile label printer with type c usb support android IOS and apple win os.
Private Mold:
Yes
Products Status:
Stock
Type:
Label thermal printer
Style:
Standard or with belt buckle
Use:
Barcode label printer
Interface Type:
blue tooth+Type C USB
Max Paper Size:
80mm
Black Print Speed:
120mm/s
Color Print Speed:
Null
Max. Resolution:
203dpi
Brand Name:
Good Partner
Model Number:
HDD M80+
Place of Origin:
China
Warranty(Year):
2-Year
HDD-80268 High-speed 3 Inch Built-in or external Thermal 80mm Thermal Receipt Printer For POS And Restaurant.
Packaging & Delivery
Selling Units:
Single item
Single package size:
23X21X20 cm
Single gross weight:
1.825 kg
Package Type:
Standard export carton
Ready to Ship
1899 M2M Io Rs485 Concetrator A Suppliers
Short on time? Let M2M Io Rs485 Concetrator A sellers contact you.
Portable Printer label printer blue tooth mobile label printer with type c usb support android IOS and apple win os.
Packaging & Delivery
Selling Units:
Single item
Single package size:
21X14X6 cm
Single gross weight:
0.600 kg
Package Type:
Standard export carton
Ready to Ship
Packaging & Delivery
Selling Units:
Single item
Single package size:
12.2X11.2X5.2 cm
Single gross weight:
0.339 kg
Package Type:
Standard export carton
Ready to Ship
Off grid
Rated power: 1000W
Dimension(W/H/D): 225*355*92mm
Net weight: 5kgs
LCD display
This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Selfie Stick Tripod easily converts to either a selfie stick or tripod for your smartphone with the wireless shutter remote. The tripod is compact for easy carry on vacations as well as around your home.
Our selfie stick with tripod stand has a clip that cradles your phone securely and rotates 360 degrees for both portrait and landscape mode for pictures and videos. The phone holder folds away neatly when not in use.
The tripod stand is extremely portable, lightweight, compact and foldable - ideal for traveling and photography. For tripod mode, simply open the handle outwards and pull out the last section of the pole to adjust so it sits on a tabletop.
Compatible with both iOS and Android - press the remote for 3 seconds to turn on and pair with your smartphone - no wires needed. Keep the wireless remote secured in the handle for selfie stick mode or remove for long distance use on the tripod.
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging.
LCD display , easy to operate on LCD screen
Multi stage charging
(3-stage charging , parallel charging and equalized charging function)
BTS - Battery remote temperature sensor terminal
Enable to charge Li-thium, Gel , lead-acid battery
With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse
polarity, Over charging, Output short circuit
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging.
LCD display , easy to operate on LCD screen
Multi stage charging
(3-stage charging , parallel charging and equalized charging function)
BTS - Battery remote temperature sensor terminalEnable to charge Li-thium, Gel , lead-acid battery
With RS485 & USB communication port
Protection: PV array short circuit, PV reverse polarity, Battery reverse
polarity, Over charging, Output short circuit
Rated power: 1-5KW
Pure sine wave output
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Bult in MPPT 60A/80A solar charge controller
Combining solar system, AC utility, and battery power source to supply
continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
WIFI remote monitoring (optional)
Compatible to generator
Support parallel operation up to 3 units (available for 3KW-5KW 48V)
This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Rated power: 1-5KW
Pure sine wave output
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Bult in MPPT 60A/80A solar charge controller
Combining solar system, AC utility, and battery power source to supply
continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
WIFI remote monitoring (optional)
Compatible to generator
This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Built-in MPPT solar charge controller
MAX PV Array Open Circuit Voltage: 450V
Can provide the power to the load without battery
Combining solar system, AC utility, and battery power source to supply
continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
Parallel operation with up to 3 units
WIFI remote monitoring (optional)
PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
Pure sine wave output
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Built-in MPPT solar charge controller
MAX PV Array Open Circuit Voltage: 450V
Can provide the power to the load without battery
Combining solar system, AC utility, and battery power source to supply
continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
Parallel operation with up to 3 units
WIFI remote monitoring (optional)
PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is
150~430Vdc, which Can help customers make full use of solar energy.
The Cellular IoT RTU is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, inbuilt industrial Cellular module. It provides 8 digital inputs, 6 analog(ultra high 24 bit resolution) or PT100 Resistance Temperature Detector (RTD) inputs, 4 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity, 1 Ethernet RJ45 port for connect internet WAN or LAN, supports dual nano sim card, with 2 RS485 serial port, supports 224 mapping registers via Modbus RTU protocol. It can monitoring and operates the I/O ports by SMS, APP, Web Server, internet, timers and programmed inter-lock events automatically.
SIM5218
The SIM5218 series is Tri-Band/Single-Band HSPA/ WCDMA and Quad-Band GSM/GPRS/EDGE
module solution which supports up to 7.2Mbps downlink speed and 5.76Mbps uplink speed services.
It has strong extension capability with rich interfaces including UART, USB2.0 high speed,
Embedded SIM Card, SD Card, Camera sensor, GPS, etc.
With abundant application capability like embedded LUA script,TCP/UDP/FTP/FTPS/HTTP/HTTPS/SMTP/POP3 and MMS, it will add much value to customers'' application. It is ideal for a wide arrange
of products including USB Modems, gateways, router, PDA, Video phone, and much more.
General features
• SIM5218A: Tri-Band UMTS/HSPA850/1900/2100 MHz,GSM/GPRS/EDGE850/900/1800/1900MHz
SIM5218E :Tri-Band UMTS/HSPA 900/1900/2100MHz,GSM/GPRS/EDGE850/900/1800/1900MHz
SIM5218J: Tri-Band UMTS/HSPA800/1900/2100 MHz,GSM/GPRS/EDGE850/900/1800/1900MHz
• Video call with Camera sensor interface
• WCDMA Diversity
• HSDPA 7.2Mbps
• HSUPA: 5.76Mbps
• GPRS multi-slot class 12
• EDGE multi-slot Class 12
OPC UA I/O Controller
OPC UA I/O Controller BL205 was designed for IIOT applications, adopts embedded Linux system, supports customerized development applications, built-in logic programmable function module, is compatible with OPC UA Protocol.
OPC UA I/O Controller BL205 supports dual network port cascade communication, and can support up to 32 IO modules, including AI, AO, DI, DO, RTD, TC, RS485, RS232, etc.,
OPC UA I/O Controller BL205 integrates data acquisition, automatic control, Logic program, customerized application, and edge computing, suitable for creating a high-speed, stable and reliable industrial IoT automation control system.
1899 M2M Io Rs485 Concetrator A Suppliers
Short on time? Let M2M Io Rs485 Concetrator A sellers contact you.
