"Type: Food Additives
Origin: China
CAS No.: 63-42-3
AUCO No.: 919
Packing: 25kg bag"
Items Standard
Identification A The infrared absorption spectrum of the sample is concordant with that of the standard.
Identification B The principal spot obtained from the Test solution corresponds in appearance and RF value to that obtained from Standard solution A
The test is not valid unless the chromatogram obtained with Standard solution B shows four clearly discernible spots, disregarding any spots at the origin.
Identification C A red color develops.
Specific optical rotation +54.4~+55.9, calculate on the anhydrous basis
Acidity or alkalinity Add 0.3ml of phenolphthalein TS: the solution is colorless, and not more than 0.4 ml of 0.1 N sodium hydroxide is required to produce a red color.
Water Not more than 1.0%
Residue on ignition Not more than 0.1%
Heavy metals The limit is 5�µg per g.
Protein and light-absorbing impurities The absorbance divided by the path length in centimeters is not more than 0.25 in the range of 210 to 220nm and is not more than 0.07 in the range of 270 to 300nm.
TPC <100cfu/g
Yeast & Mould <50cfu/g
Escherichia coli (/10g) absence
Conclusion : The Quality of lactose product has the achieved scandard of USP40 after examination standard examination, and consequently meet the provision.
Color Take an appropriate amount of sample in the white shallow dish on the natural light line, observe, white to light yellow.
Taste smell Take an appropriate amount of sample in the white shallow dish in natural light, observe, slightly sweet and odorless.
State of organization Take an appropriate amount of the sample in the white shallow disk in natural light, observe, crystal or powder crystal.
Lactose a (In the dry basis)/(g/100g) A lactose content according to (100- water-ash)/(100-water) calculation. 99.0
Water/(g/100g) 6.0 (GB 5009.3-2010 Karl fisher method)
Ash/(g/100g) 0.3 (GB 5009.4)
PH/(10% aqueous solution) Take 10g of lactose in 100ml beaker, add distilled water into 10% water solution,with a pH measuring the value of pH. 4.5-7.0.
Conclusion : The quality standard test of this food lactose is in accordance with the regulations.
Items Standard
Color Take an appropriate amount of sample in the white shallow dish on the natural light line, observe, white to light yellow.
Taste smell Take an appropriate amount of sample in the white shallow dish in natural light, observe, slightly sweet and odorless.
State of organization Take an appropriate amount of the sample in the white shallow disk in natural light, observe, crystal or powder crystal.
Lactose a (In the dry basis)/(g/100g) A lactose content according to (100- water-ash)/(100-water) calculation. 9.0
Water/(g/100g) 6.0 (GB 5009.3-2010 Karl fisher method)
Ash/(g/100g) 0.3 (GB 5009.4)
PH/(10% aqueous solution) Take 10g of lactose in 100ml beaker, add distilled water into 10% water solution,with a pH measuring the value of pH. 4.5-7.0.
Conclusion : The quality standard test of this food lactose is in accordance with the regulations.
Natamycin 50% in Lactose is a mixture of Lactose and Natamycin. Natamycin, also called Pimaricin, E235, CAS no.7681-93-8, food preservative. It can be used on several kinds of food to inhibit the growth of mould, yeast and fungi and would not impact on food taste. It is safe for human being. Uses: use in dairy foods (cheese) bread, baked foods to preserve and keep them fresh.
As an experienced Natamycin 50% in NaCl manufacturer and supplier, we has been supplying and exporting Natamycin 50% in NaCl for almost 10 years, we can also supply other forms of Natamycin. Please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Categories Preservatives
Qty in 20â??FCL 5600kg
Min Order 500kg
Origin China
Packaging Factory Packaging or Neutral
Certificate ISO, Kosher, Halal, BRC
E No. E235
CAS No. 7681-93-8
HS Code 294190
Specification FCC/USP
Natamycin 50% in Lactose Specification
ITEM STANDARD
Appearance Off-white crystalline powder, odorless
Purity >= 50%
Loss on drying =< 8%
pH (10% solution) 5.0- 7.5
Arsenic =< 1 mg/kg
Lead =< 1 mg/kg
Mercury =< 1 mg/kg
Total heavy metals ( as Pb) =< 10 mg/kg
Total plate count 100 cfu/g
Coliform bacteria =< 30 MPN/ 100g
E.coli/ 5g Negative
Listeria monocyto/ 10g Negative
Salmonella/ 10g Negative
"Type: Food Additives
Origin: China
CAS No.: 63-42-3
AUCO No.: 919
Packing: 25kg bag"
Items Standard
Identification A The infrared absorption spectrum of the sample is concordant with that of the standard.
Identification B The principal spot obtained from the Test solution corresponds in appearance and RF value to that obtained from Standard solution A
The test is not valid unless the chromatogram obtained with Standard solution B shows four clearly discernible spots, disregarding any spots at the origin.
Identification C A red color develops.
Specific optical rotation +54.4~+55.9, calculate on the anhydrous basis
Acidity or alkalinity Add 0.3ml of phenolphthalein TS: the solution is colorless, and not more than 0.4 ml of 0.1 N sodium hydroxide is required to produce a red color.
Water Not more than 1.0%
Residue on ignition Not more than 0.1%
Heavy metals The limit is 5µg per g.
Protein and light-absorbing impurities The absorbance divided by the path length in centimeters is not more than 0.25 in the range of 210 to 220nm and is not more than 0.07 in the range of 270 to 300nm.
TPC <100cfu/g
Yeast & Mould <50cfu/g
Escherichia coli (/10g) absence
Conclusion : The Quality of lactose product has the achieved scandard of USP40 after examination standard examination, and consequently meet the provision.
Color Take an appropriate amount of sample in the white shallow dish on the natural light line, observe, white to light yellow.
Taste smell Take an appropriate amount of sample in the white shallow dish in natural light, observe, slightly sweet and odorless.
State of organization Take an appropriate amount of the sample in the white shallow disk in natural light, observe, crystal or powder crystal.
Lactose a (In the dry basis)/(g/100g) A lactose content according to (100- water-ash)/(100-water) calculation. 99.0
Water/(g/100g) 6.0 (GB 5009.3-2010 Karl fisher method)
Ash/(g/100g) 0.3 (GB 5009.4)
PH/(10% aqueous solution) Take 10g of lactose in 100ml beaker, add distilled water into 10% water solution,with a pH measuring the value of pH. 4.5-7.0.
Conclusion : The quality standard test of this food lactose is in accordance with the regulations.
Color Take an appropriate amount of sample in the white shallow dish on the natural light line, observe, white to light yellow.
Taste smell Take an appropriate amount of sample in the white shallow dish in natural light, observe, slightly sweet and odorless.
State of organization Take an appropriate amount of the sample in the white shallow disk in natural light, observe, crystal or powder crystal.
Lactose a (In the dry basis)/(g/100g) A lactose content according to (100- water-ash)/(100-water) calculation. 99.0
Water/(g/100g) 6.0 (GB 5009.3-2010 Karl fisher method)
Ash/(g/100g) 0.3 (GB 5009.4)
PH/(10% aqueous solution) Take 10g of lactose in 100ml beaker, add distilled water into 10% water solution,with a pH measuring the value of pH. 4.5-7.0.
Conclusion : The quality standard test of this food lactose is in accordance with the regulations.
Product Nature
Molecular formula: Na2SO4
Molecular weight: 142.04
Property: white granular crystal or powder
Use
As filler of detergent, the making of sodium sulphide, water glass, or used in papermaking, glass, dye and used as filler, dyeing auxiliary, laxative, antidote, t also can be used in fiber, leather, metallurgy, enamel and soap.
Specifications
Item GB6009-2003
Type First grade Result of common product Result of neutral product
Na2SO4 99.0 99.20 99 40
Water insoluble matter %0.05 0.02 03
Ca & Mg %(Mg) 0.15 0.02 02
Chloride %(Cl) 0.35 0.23 20
(Fe) 0.002 0.0001 0001
Moisture % 0.20 0.02 02
Whiteness % 82 88 85
Packing and Storage
Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
LAS 5NF is a Lactose Substitute Non- Fat Solid is an Enzymatically Modified, Clean Label, Vegan, Gluten-Free, Plant-based and Non-GMO starch used as curdling and thickening agent in Flavored milk,Ice cream,Gelato,Cottage cheese, Vegan Cheese,Sour cream,Whipped cream and Vegan butter. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG).
APPLICATIONS
1. First add 4% to 10% of LAS 5NF based on the Protein Content of the Milk in cold (4�°C to 36�°C) condition. Dissolve it well without Lump formation.
2. Mix 10% of extra water to total mix and heat the milk mixer to 85�°c & hold for 12 min with continuous stir .The product is settle down when stir is not good.
3. Cool the pasteurized milk to 43�°c to 45�°c with slow stir and then add required quantity of culture and stir it slowly for even mixing of culture.
4. Then keep it in an incubator @ 43�°C for 6 hours and transfer it to chiller.
DOSAGE
For excellent results, use 4 to 10% of LAS 5NF of total batch size, based on the protein content of the milk. For lower protein content in the milk higher LAS 5NF need to be used.
Dextrose Anhydrous (D-glucose) , CAS no. 50-99-7, is a sugar that's a stable, odorless, white crystalline powder, manufacturing process from starch. Dextrose Anhydrous is used in the production of baked goods, candy and gum, creams and frozen dairy products (like some ice-creams and frozen yogurts), alcoholic beverages, jarred and canned foods, cured meats and also energy drinks.
As an experienced Dextrose Anhydrous manufacturer and supplier, we has been supplying and exporting Dextrose Anhydrous for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Dextrose Anhydrous powder Specification
ITEM STANDARD
APPEARANCE WHITE CRYSTALLINE POWDER
SOLUBILITY FREELY SOLUBLE IN WATER, SPARINGLY SOLUBLE IN ALCOHOL
OPTICAL ROTATION +52.5+53.
APPEARANCE OF SOLUTION CLEAR,ODOURLESS
MOISTURE 1.0% MAX
SULFUR DIOXIDE 15PPM MAX
CHLORIDES 125PPM MAX
SULPHATED ASH 0.1% MAX
CALCIUM 200PPM MAX
SULPHATES 200PPM MAX
BARIUM CONFORMS
LEAD IN SUGARS 0.5PPM MAX
ARSENIC 1PPM MAX
TOTAL BACTERIA COUNT 1000PCS/G MAX
MOLDS AND YEASTS 100PCS/G MAX
Pyrogens (tal 10% Solution) 0.125eu/ml Max
Escherichia Coli negative
NESTOGEN Low Lactose is a specialized infant formula designed for babies who may have difficulty digesting lactose a natural sugar found in milk This formula is carefully formulated to provide essential nutrients while reducing the lactose content making it easier for infants with lactose sensitivity to digest It is a trusted option for parents seeking an alternative to standard infant formulas for their babies with specific dietary needs As with any infant formula its crucial to consult with a healthcare professional for personalized advice on your babys nutrition and to follow recommended guidelines for preparation and feeding Please note that product availability and formulations may have changed after my last knowledge update in September 2021 so for the most current information I recommend checking Nestls official website or consulting with a healthcare provider
SODIUM SULPHATE ANHYDROUS 99% is a white, odorless, bitter crystalline or powder with hygroscopicity. The appearance is colorless, transparent, large crystals or granular small crystals.
CAS number: 7757-82-6
HS Code: 283311
Molecular Formula: Na2So4
Packing: Jumbo bag 1.5 MT and PP Sacks of 50 kgs
Sodium Acetate E262, CAS no.127-09-3, is a sodium salt of acetic acid, available as a white powder. Sodium Acetate Anhydrous is widely used as a preservative and flavor enhancer in food processing. Sodium acetate may be added to food as a seasoning, sometimes in the form of sodium diacetate, a one-to-one complex of sodium acetate and acetic acid.
As an experienced Sodium Acetate manufacturer and supplier, we has been supplying and exporting Sodium Acetate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Sodium Acetate Specification
ITEM STANDARD
Appearance White, odorless, hygroscopic powder
Assay (Dry Basis, %) 99.0-101.0
pH (1% Solution, 25) 8.0- 9.5
Loss on Drying (120, 4 Hours, %) 1.0
Insoluble Matter (%) 0.05
Alkalinity (as NaOH, %) 0.2
Chlorides (Cl, %) 0.035
Formic acid, formates and other oxidizable (as formic acid) 1,000 mg/kg
Phosphate (PO4) 10 mg/ kg
Sulphate (SO4) 50 mg/ kg
Iron (Fe) 10 mg/ kg
Arsenic (As) 3 mg/ kg
Lead (Pb) 5 mg/ kg
Mercury 1 mg/ kg
Heavy Metal (as Pb) 10 mg/ kg
Potassium Salt (%) 0.025
Disodium Phosphate Anhydrous, E339, CAS no. 7632-05-5, manufacturing process via chemcial synthesis, Phosphoric acid and Sodium hydroxide as raw materials. Disodium Phosphate Anhydrous is a white powder and granular substance that is basically odorless. It is used to adjust pH, emulsifier, improver, buffer, nutrient supplement, fermentation aid, binder, and chelating agent.
As an experienced Disodium Phosphate Anhydrous manufacturer and supplier, we has been supplying and exporting Disodium Phosphate Anhydrous for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Disodium Phosphate Anhydrous Specification
Product Name Disodium PhosphateDSP Disodium Phosphate Dihydrate DSP 2H2O Disodium Phosphate HeptahydrateDSP 7H2O Disodium Phosphate DodecahydrateDSP 12H2O
Appearance White powder Crystal particles Crystal particles Crystal particles
Disodium Phosphate Na2HPO4(on dried material) %(w/w) min 98.0 min 98.0 min 98.0 min 98.0
Water Insoluble %(w/w) max 0.2 max 0.2 max 0.2 max 0.2
Arsenic (As) mg/kg max 3 max 3 max 3 max 3
Heavy Metal (as Pb) mg/kg max 10 max 10 max 10 max 10
Fluoride (as F) mg/kg max 50 max 50 max 50 max 50
Loss on lgnition %(w/w) max 5.0 18.0-22.0 42.0-46.0 max 61.0
Citric Acid Anhydrous, E330, CAS no.77-92-9, Colorless crystals or white crystalline powder soluble in water, Citric acid is a natural occurring fruit acid, manufacturing process via chemical synthesis. Citric acid is the most widely used organic acid and pH-control agent in foods, beverages and pharmaceuticals applications.
As an experienced Citric Acid Anhydrous manufacturer and supplier, we has been supplying and exporting Citric Acid Anhydrous and Monohydrate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Citric Acid Anhydrous Specification
Item BP2009 USP32 FCC7 E330 JSFA8.0
Characters Colourless Crystal or White Crystal powder
Identification Pass test
Clarity and Color of solution Pass test Pass test / / /
Light transmittance
Water 1.0% 1.0% 0.5% 0.5% 0.5%
Content 99.5% 100.5% 99.5% 100.5% 99.5%100.5% 99.5% 99.5%
RCS Not exceeding Not exceeding 0.52,T 30% Not exceeding Not exceeding
the standard the standard the standard the standard
Calcium Pass test
Iron
Chloride
Sulphate 150ppm 0.015%0.048%
Oxalates 360ppm 0.036% No turbidity forms 100mg/kg Pass test
Heavy metals 10ppm 0.001% 5mg/kg 10mg/kg
Lead 0.5mg/kg 1mg/kg
Aluminium 0.2ppm 0.2ug/g
Arsenic mg/kg 4mg/kg
Mercury 1mg/kg /
Sulphuric acid ash content
3896 Lactose Anhydrous Suppliers
Short on time? Let Lactose Anhydrous sellers contact you.
