TEMPO make laboratory autoclave are suitable for pharma & biotech industries, food research & quality assurance labs, agriculture research, healthcare & diagnostic labs, university, etc.
Temperature range 121 C to 125 C
Pressure range 15 to 22 PSI
Factory set 15 PSI at 121 C
Supply 230V, AC
Construction :
Vertical double walled design has a single chamber for steam & water. Lid, flange & bottom plate is also made of SS, all joints are argon welded.
Jointless silicon gasket. Heavy duty industrial flange heater. Lid fitting pressure gauge 0-30 PSI, safety spring loaded pressure valve, steam release valve. Safety high pressure release valve. Foot lifting arrangement is provided in 121C/D/E/F, a basket made of thick stainless steel (S.S.) rod wire mesh.
Technical Specification :
Semi automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer.
Low water level cuts off the system with magnetic oat switch for heaterâ??s safety.
Fully automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer.
Low water level cuts off the system with magnetic oat switch for heater's safety.
Vertical Autoclave is an Steam Sterilization equipment used in Hospital,Pharmaceutical, Laboratories, Food Industry,etc.Temp ranges from 121 to 134 degree Celcius with 15 - 20 PSI.It comes in Manual,Semi as well as Fully Automatic model with or without Printing facility.
Models available in Stainless Steel 304 & 316, 316L in 35, 50, 75,100, 150, 200 & 250 ltrs respectively.
Customers can choose from the range depending upon their application, volume and budgetary requirements. Features are designed specifically for lab based sterilizations used in research laboratories, pharmaceuticals, microbiology labs, food and chemical industries.
- High performance, reliable results and a longer life makes it an ideal choice.
- Microcomputer control system
- Unique anti scald design chamber for corrosion resistance
- Stainless steel chamber
- Five sterilization modes
Customers can choose from the range depending upon their application, volume and budgetary requirements. Features are designed specifically for lab based sterilizations used in research laboratories, , microbiology labs, food and chemical industries.
- High performance, reliable results and a longer life makes it an ideal choice.
- Microcomputer control system
- Unique anti scald design chamber for corrosion resistance
- Stainless steel chamber
- Five sterilization modes
GI80SW
Zealway GI series vertical autoclave. 29L/54/80L/100L Max temperature: 135. Hand wheel opening LCD screen Programs memory USB port F0 value calculation 5 level authority Auto start up timer 3Q calibration port Printer/floating sensor/digital pressure sensor/auto fill/auto drain can be added.
22712 Laboratory Vertical Autoclave Suppliers
Short on time? Let Laboratory Vertical Autoclave sellers contact you.
GI54SW Zealway GI series vertical autoclave. 29L/54/80L/100L Max temperature: 135. Hand wheel opening LCD screen Programs memory USB port F0 value calculation 5 level authority Auto start up timer 3Q calibration port Printer/floating sensor/digital pressure sensor/auto fill/auto drain can be added.
The innovative, efficient design of elaine autoclave offers such feature and benefits that make sterilization of any of your instruments easier and more effective then ever. Elaine autoclave complies with en-13060 standard. It can sterilize any kind of hollow, porous, wrapped or unwrapped instruments.
At present, the fractionated vacuum is the most advanced and safe system for the elimination of air pockets. Thanks to the different phase of vacuum alternated to the compression phase, the air pockets both in the sterilization chamber and in the hollow and porous tools are expelled and the validity of the sterilization cycle is so guaranteed. On completion of the selected sterilizing program, also, elaine automatic, pulsed, vacuum assisted drying phase to ensure instruments perfectly dry.
Tempo make Laboratory Autoclave are suitable for Pharma & Biotech industries, Food research & Quality assurance labs, Agriculture research, Health care & Diagnostic labs, University, etc
Technical Data :
Temp. Range : 121 C to 125 C
Pressure Range : 15 to 22 PSI
Factory Set : 15 PSI at 121 C
Supply : 230 Volt, AC, Single Phase, 50Hz
The Vertical Autoclave is an indispensable medical equipment used in hospitals for sterilization of surgical instruments, laboratory glassware, and medical waste. With its vertical chamber design, it maximizes space efficiency while ensuring thorough sterilization. This autoclave operates with steam under pressure, effectively eradicating harmful microorganisms. It boasts precise digital controls and safety features, such as automatic pressure and temperature monitoring. Its durable construction and corrosion-resistant materials ensure longevity. Hospitals rely on vertical autoclaves for their crucial role in infection control, maintaining aseptic conditions, and ensuring the safety and health of patients and healthcare professionals, making it a vital asset in hospital settings.
FUGE dewaxing autoclave uses the high temperature and high pressure steam to remove wax from ceramic shell mold. FUGE dewaxing autoclave adopts the Siemens control system to automate the dewaxing process. In the whole process of lost wax, our dewaxing autoclave needs no labor to operate the machine. Installed with double safety protection devices on our dewaxing autoclave, FUGE boilerclave works at reliable and safe condition.
Features:
Efficiency: Designed as an integration of the steam boiler and dewaxing chamber to save space and promote efficiency.
Easy operationï¼?Easy to operate in automatic and manual mode.
Fast: Double layers pressure vessel takes short time for pressure balance, and the time can be adjusted on certain conditions.
Stability: Siemens PLC programmable controller with strong anti-interference ability and stable performance.
Traceability: Paperless recorder to monitor the whole working status, and allow user downloads the technical process data for analysis.
The Ceramic Core Leaching Autoclave is designed for removing the silica-based ceramic cores. We have delivered many sets of core leaching autoclave to the aerospace turbine blades manufacturers all over the world. Except for the ceramic core leaching autoclave, we also can customize the core leaching autoclave for aluminum core.
The core leaching autoclave is widely used in high end precision castings manufacturing, and turns to be the most important core equipment during the investment casting.
Key features
Efficiency : FUGE core leaching autoclave completes core leaching within several hours
Safety : FUGE core leaching autoclave has no caustic liquid and air leaking to ensure the safety of environment and operator during its running .
Stability : FUGE core leaching autoclave uses international brand key parts to ensure the reliable and stable running.
Saving cost: FUGE core leaching autoclave use caustic and water circulating system aims to save costs.
APC: FUGE core leaching autoclave is easy to operate and maintain through Siemens PLC control system and FUGE Advanced control technology.
Telecommunication: FUGE core leaching autoclave has remote monitoring system facilitates the diagnosis and maintenance of the autoclave .
Parameter list
No. Name Specification
1 Model FG-TXF600 FG-TXF750 FG-TXF1065
2 Diameter 600mm 750 mm 1065mm
3 Depth 1200mm 1200 mm 1800mm
4 Effective working diameter 520mm 700 mm 990mm
5 Effective working depth 1000mm 1000 mm 1400mm
6 Maximum design pressure 10 bar 10bar 10bar
7 Normal working pressure 6 bar 6 bar 6 bar
8 Control system Siemens PLC Siemens PLC Siemens PLC
Dewaxing Autoclave
Dewaxing autoclave uses the high temperature and high pressure steam to remove wax from ceramic shell mold. FUGE dewaxing autoclave adopts the Siemens control system to automate the dewaxing process. In the whole process of lost wax, our dewaxing autoclave needs no labor to operate the machine. We also installed double safety protection devices on our dewaxing autoclave.
Dewaxing autoclave key features
Efficiency: Designed as an integration of the steam boiler and dewaxing chamber to save space and promote efficiency.
Easy operation Easy to operate in automatic and manual mode.
Fast: Double layers pressure vessel takes short time for pressure balance, and the time can be adjusted on certain conditions.
Stability: Siemens PLC programmable controller with strong anti-interference ability and stable performance.
Traceability: Paperless recorder to monitor the whole working status, and allow user downloads the technical process data for analysis.
Green Optional Heat Recovery Unit to save cost.
Parameter list
1 MODEL FG-TLF1000 FG-TLF1200 FG-TLF1400
2 Design pressure 1.0 1.0 1.0
3 Design temperature 183.2 183.2 183.2
4 Working pressure 0.9 0.9 0.9
5 Working temperature 179 179 179
6 Pressure
Balance Time 5s(at the pressure of 0.6 ) 5s(at the pressure of 0.6 ) 5s(at the pressure of 0.6 )
7 Inner Dimension 10001200 12001500 1400 1600
Model no. : RAU-123
Product name : portable autoclave
Specification :
Type portable
Voltage ac 110/230v
Power supply 1kw
Designed temperature 140ªc
Sterilizing temperature 121~128ªc
Sterilizing pressure 1.2~1.6 kg/cmª
Chamber size 23x42cm
Chamber capacity 17 liters
Auto dry no
Auto add water no
Safety device yes
N.W. 18 kgs
G.W. 25 kgs
Packing (lxwxh) 60x34x42cm
Standard accessories :
Sterilizing box 1pc
Sterilizing tray 1pc
Heating element 1pc
Silicone door seal 1pc .
Model no. : rau-123
Product name : portable autoclave
Specification :
Type portable
Voltage ac 110/220v
Power supply 1kw
Designed temperature 140ªc
Sterilizing temperature 121~128ªc
Sterilizing pressure 1.2~1.6 kg/cmª
Chamber size 23x42cm
Chamber capacity 17 liters
Auto dry no
Auto add water no
Safety device yes
N.W. 18 kgs
G.W. 25 kgs
Packing (lxwxh) 60x34x42cm
Standard accessories :
Sterilizing box 1pc
Sterilizing tray 1pc
Heating element 1pc
Silicone door seal 1pc.
Forced convection digitally controlled hot air ovens suitable for precise heating drying and various other laboratory drying applications requiring controlled heating zone
Features
Forced convection system ensures good mixing strong dispersion and maintains higher temperature uniformity inside the chamber
Most ideal for various experiments in microbiology cell cultivation of animals and plants and food for various laboratories industries R D labs etc
Synthetic door gasket made of neoprene on the doublewalled door
Useroriented design of shelves makes you adjust each space of shelves without difficulty
Adjustable two ventilation slides control inner airvapor circulation
Beaded heating elements are placed in ribs at bottom and sides for uniform heat distribution
Constructional Features
Outer body made of CRC Sheet duly powder coated
Inner chamber and adjustable trays are made of Stainless Steel SS304 grade
Gap between the inner chamber and the outer wall is filled with highgrade mineral wool for minimal heat dissipation
Bigger sized units mounted on caster wheels for easy portability
Door fitted with heavyduty hinges and door handle ensuring there are no leakages through the door gasket
Temperature Range 50C to 250C
Temperature Accuracy 1C
Temp Controller Microprocessor Based Digital Temperature IndicatorCumController with LED OR LCD Display OR TFT Touch Screen Display Controller Option
Type Available with forced convection system
Regulator Solidstate electronic relay with protective heat sink
Safety Device Overtemperature limiter switch prevents overheating
To work on 220230V AV 5060 Hz supply
FEATURES
Horizontal Cylindrical Autoclave
Triple Wall - Double Chamber
All Walls & Lid Made of Stainless Steel 304.
Strong Tubular Stand Made Of SS/MS
Separate Multiport Valves for injecting Steam into Chamber
Separate Valve for Steam Release After Use
Radial Locking System
SAFETY FEATURES
Pressure Gauge
Automatic Pressure Safety Valve
Automatic Vacuum Breaker
Digital Temp Controller & Timer
Audio Alarm
Moisture Trap System
OPTIONS
Cylindrical/ Rectangular
Steam Jacket and storage system
Specifications: It uses steam to sterilize medical equipment, surgical dressings, glass, utensils, etc. rapidly and efficiently.
Made of heavy duty seamless aluminum sheet. Long lasting. The lid is equipped with both a safety valve and steam release valve. A pressure gauge allow precise pressure tracking and safety.
Mirror Finish. External Fuel Heated. Perfect for hospitals, public health centers, health stations, clinics, and research institutes.
Size (D x H) : 350mm X 330mm + 90mm Lid. (14x16). Approximate Capacity (Ltrs.) : 40 Liters. With lid. Finish : Mirror Finish. Suitable for two Sterilizing / Dressing Drum (11x9) & (11x4.5) (Drum Not Included Drum Cost is Extra). Supplied with inner & outer stand.
OPERATING INSTRUCTION / INSTRUCTION MANUAL : PASTED ON THE AUTOCLAVE.
All aluminum deep-drawn seamless construction Mirror Finish. External Fuel Heated Supplied with inner & outer stand. All autoclaves are constructed from heavy gauge aluminum. It generates steam under pressure and temperature between 120C to 135C. Made from seamless Aluminium, top-loading autoclaves. Seamless construction ensures a bacteria-free environment, 25-30 minutes sterilizing cycle at 121c. With two stages overpressure protection system incorporating a calibrated continuous bleeding pressure stopcock and pressure release weight valve. With heat-resistant handles and steam release/control valve. Pressure Gauge: Color-coded pressure gauge showing internal chamber conditions during the cycle. The sterilization zone in green color is shown from 15 psi to 20 psi (OR 1.034 bar to 1.378 bar) which is equivalent to temperature of 121c to 127c. Dial size- 2.5?,Dial show measurement in 2 units
(i) kg/cm²
(ii) lb/inch².
Full scale dial of pressure gauge is 0-30 lb/ inch or 0-2 kg/ cm.
Composite autoclaves are specialized pressure vessels designed to cure composite materials under precisely controlled conditions. With continuous advancements in efficiency, control, and speed, composite autoclaves for sale remain a cornerstone technology for innovation in the world of composite materials.
The Advantages of Composite Autoclaves in Industrial Applications
Composite Autoclaves: Elevating Industrial Manufacturing with High-Performance Curing
Composite materials have become game-changers in numerous industries due to their exceptional strength-to-weight ratio, design flexibility, and superior performance characteristics. However, unlocking the full potential of these materials relies heavily on the curing process. This is where composite autoclaves step in, offering a multitude of advantages over traditional curing methods in industrial applications.
Superior Quality and Performance:
Precise Pressure Control: Unlike ovens with limited pressure capabilities, composite autoclaves from ETSA, one of professional composite autoclave suppliers and composite autoclave manufacturers, can apply significantly higher and precisely controlled pressure. This ensures optimal compaction of laminate layers within the composite, eliminating air pockets (voids) and achieving complete resin flow and fiber wetting. These factors are paramount for achieving the desired mechanical properties, strength, and overall performance of the final composite part.
Uniform Heating Throughout: Composite autoclaves for sale guarantee consistent and uniform heat distribution across the entire composite structure, regardless of its size or complexity. This even heat distribution is crucial for attaining consistent material properties throughout the part, eliminating inconsistencies and potential weak points.
Environmental protection and energy saving: The autoclave molding process does not use harmful substances such as solvents and paints, which has the advantages of environmental protection and energy saving.
The Key Uses of Composite Autoclaves
Curing High-Performance Composites: These small composite autoclaves are essential for curing advanced composite materials like carbon fiber and Kevlar. The high pressure ensures optimal compaction of the laminate layers, eliminating air pockets and achieving complete resin flow for maximum strength and performance.
22712 Laboratory Vertical Autoclave Suppliers
Short on time? Let Laboratory Vertical Autoclave sellers contact you.
