Features:
Laminated ceramic allows high SRF
Closed magnetic circuits
Monolithic structure suitable for flow and reflow soldering
High resistance to heat and humidity
Operating temperature range: -40 to 105ípC
Applications:
Wireless communication
Mobile telephones
Video cameras and portable VCRs
PAGOODA chip inductor introduction:
Volume: 0402, 0603, 0805, 1206, 2520, 3225
4532, 5650
Sensitivity: 12NH, 15NH, 22NH, 39NH, 68NH
1R0K, 1R2K, 2R2K2R7K, 3R3K, 4R7K10uH, 15uH12uH18u22H1MH12MH 1.5MH18MH2.2MH......
Error: J=+5%K=±10%M=±20%, N=±30%
Inductors used in power supply mounting and circuits are produced with metal composite materials or ferrite materials. It is mainly used for circuits that realize voltage conversion that requires a specific voltage to provide stable power for ICs. The corresponding inductor is used in the power supply circuit, maintains the inductance when the current allows, and has the characteristics of low square resistance.
High Current
Slow down saturation and maintain high current characteristics
Low RDC
Improves high current efficiency through low branch resistance
PAGOODA high-end technology electronic component manufacturers, chip inductors have complete specifications, can provide samples, quality assurance, comprehensive technical support, welcome to inquire
Volume: 0402, 0603, 0805, 1206, 1210
Unit: H, NH, UH, MH
Error: ±5%, ±10%
Packing: 4000PCS/reel, 3000PCS/reel above 1206
Current: the difference between small current and large current, unit A (A)
The SMD inductors in our inventory have complete specifications:
The conventional models are complete, including: chip beads, high current chip inductors, chip power inductors, high frequency inductors, chip winding inductors, laminated inductors, common mode inductors, shielded inductors, I-shaped inductors, etc.; Conventional inductance, rated current and other parameter products are available in stock.
The role of chip inductors:
1. Filtering
It can be used for power supply filtering because it has the characteristics of DC and AC resistance;
2. Resonance
It can form a resonant frequency selective circuit with a capacitor, and the resonant frequency is determined by the size of the chip inductance and capacitor;
3. Frequency division
Can be used for frequency division of high and low frequency signals
Application areas of chip inductors: Internet of Things products, smart products, Internet products, communication products, 3D printers, etc.
RF inductors are special inductors designed to be used in radio frequency (RF) and microwave applications. Inductors are basic passive components which serve to oppose changes in current flow. When current is applied from a battery or power source, the inductor temporarily stores it using a magnetic field.
For price, specification and other details please contact us
Our company is also pleased to offer products of other brands:
Bei Sensors
IBH Softec
Schmersal
BALLUFF
Pepperl+Fuchs
Bernstein
Di-Soric
Elobau
Univer
Eltra
Aventics
FESTO
Camozzi
Euchner
END-Armaturen
TAMAGAWA
SENECA
Airtac
Murrelektronik
Azbil Yamatake
FRANKE-Filter
Endress+Hauser
IFM
Ipf Electronic
Kieback & Peter
MD Micro Detectors
Bihl Wiedemann
ANDERSON-NEGELE
KITAGAWA
Georg Schlegel
Metal Work
Kipp
Allen-Bradley
Netter Vibration
Kuebler / K�¼bler
RAFI
LINDY
4B Braime
SOUTHCO
ELGO Electronic
FAG
RECO
Pilz
AIRTEC Pneumatic
COMITRONIC-BTI
L�¼tze
Hydac
Barksdale
Keyence
AirCom Pneumatic
Garlock
Mac Valves
MAHLE (Filtration Group)
Riegler
Baumer
Elreha
Sick
Siko
FAMAGA Group OHG is a family-owned company with many years of experience in the supply of components and spare parts for industrial enterprises around the world.
Our mission is to provide fair prices, reducing the cost of production for our customers.
A significant network of suppliers around the world allows us to supply any equipment, which client needs on favorable terms.
Therefore, the list of equipment we provide is tenfold greater than the catalog presented on this site.
You are welcome to check the full catalog on our website."
68 is stand for the dimetions of radiation head, 45 is stand for the dimetions of the piezoelectric ceramic,PZT8 is mean the material of piezoelectric ceramic,PZT8 is yellow ceramic,PZT4 is black.
Ultrasonic Transducers is one of main products of at UCE ultrasonic,which used the piezoelectric effort to realize transduction between electric and sound energy,also named as BLT transducer,ultrasonic transducer normally used in ultrasonic cleaning industry,high power ultrasonic etc.
Electropneumatic transducer
Input electrical current:4-20ma, 0-10v
Output pressure:20-100kpa
Et-500 is electropneumatic transducer equipment, it can decrease supply pressure to produce output pressre which is effectively proportional to input electric signal.
Supply pressure range:125kpaí½1000kpa.With bulk augmenter supply big flow (20.4 m3/h).
Features:
Flow rate: 7.6m3/h when supply pressure is 175kpa
20.0m3/h when supply pressure is 700kpa
Min/max. Supply pressure:
Minimum-3psig(21kpa) above maximum output
Maximum-100psig(700kpa)
Sensitivity: <+-0.15% of span per 10 psig
Linearity:<+-0.75% of span
Repeaability: <0.5% of span
Hysteresis: <0.1% of span
Flow rate: 4.5 scfm(7.6m3/hr anr) at 100 psig(175 kpa) supply
12.0 scfm(20.0m3/hr anr) at 100 psig(700 kpa) supply
Maximum air consumption: 0.05scfm(0.07m3/hr ) midrange typical
Port size:
1/4 npt(pneumatic)
1/2 npt(electric)
Weight: 2.1lb.(0.94kg)
Input current:4-20ma
Output pressure:20-800kpa
Type includes:TAT Transducer,Static Temperature Transducer,Platinum Resistance Temperature sensor,Thermocouple Transducer,AWT Wireless temperature sensor
Performance
TAT Transducer
senses the air temperature of the stagnation point and output resistance signal
Operation temperature range:-60 ? ~+350?
Type:GZW-3, GZW-6, GZW-7
Static Temperature Transducer
Measures the static T of air or liquid and provides resistance output accordingly.
Measure range: -60?~300?
Error less than ±1?
Platinum Resistance Temperature sensor
Measurement Range:
-60?~300?
Tolerance: d=±(0.5+5×10 -3 t)?
Type: GWR-24, GWR-24A,GWR-31/31A,GWR-39, GWR-92, GWR-95
Thermocouple Transducer
Use a thermocouple to sense the temperature of the environment or air flow, and produce a voltage signal (mv)
Temperature range: 0ºC~900ºC
AWT Wireless temperature sensor
Model:AWT-GN-DU1
Characters:
1.Low power consumption, long standby time
2.High measurement accuracy
3.Adjustable sampling rate(10min~12h)
4.Zigbee wireless communication protocol
4.long distance transmission
5. Full Metal Package with the IP65/67 Protection class
6.Good appearance
Item Specifics:
Model: PIM1030R12MZ
L0(uH)/inductance at 0A,100KH):Typ.:0.12
DCR (mª+)at 25ípC:Typ.0.65/Max:0.75
Irated(Adc)/Heat RatingCurrent :Typ.:30
Isat(Adc)/Saturation Current:Typ.:75
Available L0(uH):From 0.12 to 10.00
Molded Power Inductor
Operating temperature : -55íµ ~ +125íµ
Ambient Temperature, Maximum : 85íµ
Temperature Rise, Maximum: 40íµ
Features
Low profile, high current SMD type. Lowest DCR/µH, in this package size, low buzz noise due to its gap-less structure, RoHS compliant.
Frequency range up to 5MHz.
Lowest DCR/µH, in this package size
Low buzz noise due to its gap-less structure
RoHS compliant.
Applications
Notebook/Desktop/Server/Video Card applications.
High current POL converters.
Low profile, high current power supplies
Battery powered devices.
Ideal for power source circuits, DC-DC converter
DC-AC inverters inductor application.
Note:
1. L0 is inductance tested at 0 Adc.
2. Isat is the DC current which cause the inductance drop approximately 30% of its nominal inductance without current.
3. Irated is the DC current which cause the surface temperature of the part increase appproximately than 40íµ.
4. Operating Temperature Range: - 55íµ to +125íµ
5. The part temperature (ambient + temp rise ) should not exceed 125íµ under worse case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provision all affect the part temperature. Part temperature should be verified in the end application.
6. The rated current as listed is either the saturation current or the heating current depending on which value is lower.
Multilayer chip inductors
Monolithic structure for highly reliable surface mount applications.
Excellent solderability and high resistance for either flow or reflow soldering.
Superior q characteristics guaranteed over the wide frquency application.
Features:
1. High dimensional precision wire wound inductors suitable for automatic placement;
2. Good solderability;
3. Heat-resistant resin encapsulation, with excellent mechanical strength;
4. Excellent Q value and high reliability;
5. Used in LCD TVs, computer drives, mobile phones, car audio and other electronic products.
Order Hotline: 400-003-5559
I-shaped inductor, the role of the inductor, the inductance formula, the unit of the inductor, the chip inductor package, the inductor, the chip power inductor, the one-piece inductor, the chip inductor specification, the I-shaped inductor, the chip I-shaped inductor specification, Shielded I-shaped inductor, SMD inductor tdk, SMD inductor pdf, SMD inductor 47uh, SMD inductor 470, SMD inductor 330uh, SMD inductor 2.2uh, buy SMD inductor,
