Volume: 0402, 0603, 0805, 1206, 1210
Unit: H, NH, UH, MH
Error: ±5%, ±10%
Packing: 4000PCS/reel, 3000PCS/reel above 1206
Current: the difference between small current and large current, unit A (A)
The SMD inductors in our inventory have complete specifications:
The conventional models are complete, including: chip beads, high current chip inductors, chip power inductors, high frequency inductors, chip winding inductors, laminated inductors, common mode inductors, shielded inductors, I-shaped inductors, etc.; Conventional inductance, rated current and other parameter products are available in stock.
The role of chip inductors:
1. Filtering
It can be used for power supply filtering because it has the characteristics of DC and AC resistance;
2. Resonance
It can form a resonant frequency selective circuit with a capacitor, and the resonant frequency is determined by the size of the chip inductance and capacitor;
3. Frequency division
Can be used for frequency division of high and low frequency signals
Application areas of chip inductors: Internet of Things products, smart products, Internet products, communication products, 3D printers, etc.
Features: Laminated ceramic allows high SRF Closed magnetic circuits Monolithic structure suitable for flow and reflow soldering High resistance to heat and humidity Operating temperature range: -40 to 105ípC Applications: Wireless communication Mobile telephones Video cameras and portable VCRs
PAGOODA chip inductor introduction: Volume: 0402, 0603, 0805, 1206, 2520, 3225 4532, 5650 Sensitivity: 12NH, 15NH, 22NH, 39NH, 68NH 1R0K, 1R2K, 2R2K2R7K, 3R3K, 4R7K10uH, 15uH12uH18u22H1MH12MH 1.5MH18MH2.2MH...... Error: J=+5%K=±10%M=±20%, N=±30% Inductors used in power supply mounting and circuits are produced with metal composite materials or ferrite materials. It is mainly used for circuits that realize voltage conversion that requires a specific voltage to provide stable power for ICs. The corresponding inductor is used in the power supply circuit, maintains the inductance when the current allows, and has the characteristics of low square resistance. High Current Slow down saturation and maintain high current characteristics Low RDC Improves high current efficiency through low branch resistance PAGOODA high-end technology electronic component manufacturers, chip inductors have complete specifications, can provide samples, quality assurance, comprehensive technical support, welcome to inquire
Magnetic Shielded surface mount inductor with high current rating. Low Resistance to keep power loss minimum.
Chip inductors
Multilayer chip inductors Monolithic structure for highly reliable surface mount applications. Excellent solderability and high resistance for either flow or reflow soldering. Superior q characteristics guaranteed over the wide frquency application.
Item Specifics: Model: PIM1030R12MZ L0(uH)/inductance at 0A,100KH):Typ.:0.12 DCR (mª+)at 25ípC:Typ.0.65/Max:0.75 Irated(Adc)/Heat RatingCurrent :Typ.:30 Isat(Adc)/Saturation Current:Typ.:75 Available L0(uH):From 0.12 to 10.00 Molded Power Inductor Operating temperature : -55íµ ~ +125íµ Ambient Temperature, Maximum : 85íµ Temperature Rise, Maximum: 40íµ Features Low profile, high current SMD type. Lowest DCR/µH, in this package size, low buzz noise due to its gap-less structure, RoHS compliant. Frequency range up to 5MHz. Lowest DCR/µH, in this package size Low buzz noise due to its gap-less structure RoHS compliant. Applications Notebook/Desktop/Server/Video Card applications. High current POL converters. Low profile, high current power supplies Battery powered devices. Ideal for power source circuits, DC-DC converter DC-AC inverters inductor application. Note: 1. L0 is inductance tested at 0 Adc. 2. Isat is the DC current which cause the inductance drop approximately 30% of its nominal inductance without current. 3. Irated is the DC current which cause the surface temperature of the part increase appproximately than 40íµ. 4. Operating Temperature Range: - 55íµ to +125íµ 5. The part temperature (ambient + temp rise ) should not exceed 125íµ under worse case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provision all affect the part temperature. Part temperature should be verified in the end application. 6. The rated current as listed is either the saturation current or the heating current depending on which value is lower.
Inductors : We carry brand names such as AEM, Dale-Vishay, Gowanda, IBS inductors, TDK and many others.
We provide OEM,ODM service,you can customized your own design,put with your logo etc From coil to the magnetic sheet/plastic or electronic parts/accessories,we can provide one step solution service with cost saving . You can customized the wire material,wire size,coil dimension,coil turns, coil thickness, magnet,leading wire,resistance, inductance etc. Wire size: start from 0.011mm -1.3mm /customized Coil Size: 0.1-3MM To 300MM /Customized Wire material:enameled copper wire,silk cover /customized winding style: self-adhensive, wet winding by automatic and semi-automatic machine over 400 Coil Style:inductor coil,self-bonding coil,bobbin coil, hearing adis coil, antenna coil, ,RFID Coil, Sensor Coil, Transformers,inductors, Application of precision coil: Hearing Aids,sound amplifiers,bluetooth,high-end earphone,medical equipment and instruction etc. Customized service included: Wire material Wire size Coil height Number of Coil Inductance DCR Etc Customized process options Clients Provide the design drawing Clients Provide the Samples Clients Provide the detailed data and requirements Supply drawing is best, or tell us the size, inductance, resistance, Q value, OD, ID, Turns, thickness, etc. Sample lead time 1-3 days Sample delivery Ship via your agent Ship via DHL/UPS/TNT/FEDEX/China Post Bulk order Lead Time 7-15 Days Supply Ability Of our factory 1000000 Piece/Pieces per Month Quality Certification:ISO14000,ISO9000,ISO9001 IATF16149 Test Equipment/Laboratory certification: 1:High-Potting 2:combustion flame retardant experiement 3:Cold and hot shock/Thermal Shock 4: constant temperature and humidity test 5: Drop Test 6:the vibration test 7: PCT High pressure accelerated aging test 8: 2D Profile/two dimensional image measurements 9" X-ray fluorescence ETC Package: plastic bag. blister divider,carton etc customized as per your products feature Shipment BY AIR,BY EXPRESS,BY SEA,BY TRAIN ETC EX-WORK,FOB,CIF,DDP,DDU etc Payment term: T/T L/C 30% Deposit and balance before shipment
Igbt, silicon control, rectifier bridge module: New and original
