INTRODUCTION:
Silicone Foams is a soft, two-component platinum silicone flexible foam that is versatile and easy to use. Vibrant colors can be achieved by adding color pigments. Cured foam is high heat resistance (will resist up to 350°F/176°C), water resistant, UV resistant and resists oxidation and ozone degradation.
FEATURE:
1.Mixed Viscocity
2.Very soft
3.Excellent temperature resistence
IMPROVE SURFACE FINISH AND MINIMIZE VOIDS WITH BACK PRESSURE:
Use a board that will completely cover the mold opening. Using a drill bit, drill 3 holes in the board spaced a few inches / cm apart. Make sure that, when the board is placed over the mold opening, the holes are over the mold cavity and rising foam will be able to make it through. Apply Ease Release 200 thoroughly too both sides of the board and into the drilled holes. Mix and pour foam into mold cavity and place board over mold opening. Hold board firmly in place. As foam rises in the mold cavity, some foam will grow out of the drilled holes. After the foam stops growing, you can let go of the board. Do not demold for at least 20 minutes.
APPLICATION:
Silicone Foams can be used for a variety of industrial and special effects applications including making foam filled appliances, padding/seat cushioning, orthotics/orthopedics, potting and encapsulation of electrical circuits and vibration dampening.
ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.
What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
For more information, welcome to contact Lilian:
Wechat / Phone: 8613617490457
E-mail: lilian(at)xrsil(dot)com
Skype: lilian-xrsilicone
Company: Dongguan Xinrun Silicone New Materials Co., Ltd / Xinrun Group Limited
Factory address: No.2,Zhouliao Road, Langzhou Industrial Zone,Changping, Dongguan, Guangdong, China
THE USAGE OF SILICONE FOAMS:
Silicone Foams can be used for a variety of industrial and special effects applications including making foam filled appliances, padding /seat cushioning, orthotics/orthopedics, potting and encapsulation of electrical circuits and vibration dampening.
THE CHARACTERISTIC OF SILICONE FOAMS:
1.Mixed Viscocity
2.Very soft
3.Excellent temperature resistence
IMPROVE SURFACE FINISH AND MINIMIZE VOIDS WITH BACK PRESSURE:
Use a board that will completely cover the mold opening. Using a drill bit, drill 3 holes in the board spaced a few inches / cm apart. Make sure that, when the board is placed over the mold opening, the holes are over the mold cavity and rising foam will be able to make it through. Apply Ease Release 200 thoroughly too both sides of the board and into the drilled holes. Mix and pour foam into mold cavity and place board over mold opening. Hold board firmly in place. As foam rises in the mold cavity, some foam will grow out of the drilled holes. After the foam stops growing, you can let go of the board. Do not demold for at least 20 minutes.
Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags.
Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.
Silicone rubber surfactant (Organic silicone surface additive) Application:
It can be used as a spray modifier, foliar absorption aids, activation agent, widely used herbicide, liquid nutrients, growth regulators, insecticides, fungicides, which do not decompose the original pesticide, can greatly reduce the surface tension of the solution, reducing the contact between the droplet and the leaf angle, surface enhanced the liquid in the plant or pest surface wetting, adhesion, and a spreader, thereby improving efficacy.
Silicone surfactant ZINCA-2000 is lower phytotoxicity and environmental hazards than the normal fatty amines, ethoxylated alcohol surfactant, and greatly reduce human and environmental impact.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Ferrosilicon� is an alloy of iron and silicon that is made by reducing silica in the presence of iron, and which plays an essential role in steelmaking.
Silicon iron, also known as ferrosilicon, is a ferroalloy composed of iron and silicon, with a silicon content ranging from 15% to 90%. It is commonly used as a deoxidizer in steelmaking and as a reducing agent in ferroalloy production and the chemical industry. In the steelmaking industry, approximately 3-5 kg of 75% ferrosilicon is consumed to produce one ton of steel. Ferrosilicon can also be used as an alloying element additive, which is widely used in low alloy structural steel, spring steel, bearing steel, heat-resistant steel, and electrical silicon steel.
Ferrosilicon is also used in the production of cast iron, as it helps to control the initial content of silicon in the melt, which is important for the microstructure and properties of the final product. Ferrosilicon cast magnesium is an alloy that contains magnesium and is used as a nodulizer in the production of ductile iron. It has a big mechanical strength, and the effect of deoxidization and desulfurization is strong. Modifiers are added to molten metal to change its properties, and ferrosilicon is one of the most commonly used modifiers in the production of cast iron. The material forming the base Ferrosilicon analysis ferrosilico cast magnesium and modifiers.
The role of Ferrosilicon in Steelmaking:
In steelmaking, Ferrosilicon is used for:
We offer superior quality sponge iron that is also known as direct- reduced iron. Our offered sponge iron is made for high grade, 65-70 fe
Min fem-80%, fet-90-92%, s-0.04% max. Loose in form of lumps.
Sponge iron filter material In industry through a sponge iron production equipment is widely applied iron phosphorus reduction method, method of reduction of iron ore concentrate, etc., the rolling iron phosphorus or ore concentrate after reduced iron press down into pieces, into the roasting tube into the kiln roasting, produce the high quality reduced iron. Sponge iron filter material for the first time into the deaerator, must first after backwashing, remove the sponge iron residue on the surface of the filter material float ash impurities.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Quality: Stable, Good elasticity and Flexibility, self-life over 12 months
Application: Agricultural, Industrial, Electronic, Household, Tie Money, Flower, Hair, Package and Food, etc. Can be used widely as gifts, decorations, mechanical equipment, making gloves, etc.
