Please click here to check who's online and chat with them.

Foams Making Silicone Rubber

(1.1)
Supplier From China
Jan-06-17

INTRODUCTION:
Silicone Foams is a soft, two-component platinum silicone flexible foam that is versatile and easy to use. Vibrant colors can be achieved by adding color pigments. Cured foam is high heat resistance (will resist up to 350°F/176°C), water resistant, UV resistant and resists oxidation and ozone degradation.

FEATURE:
1.Mixed Viscocity
2.Very soft
3.Excellent temperature resistence


IMPROVE SURFACE FINISH AND MINIMIZE VOIDS WITH BACK PRESSURE:
Use a board that will completely cover the mold opening. Using a drill bit, drill 3 holes in the board spaced a few inches / cm apart. Make sure that, when the board is placed over the mold opening, the holes are over the mold cavity and rising foam will be able to make it through. Apply Ease Release 200 thoroughly too both sides of the board and into the drilled holes. Mix and pour foam into mold cavity and place board over mold opening. Hold board firmly in place. As foam rises in the mold cavity, some foam will grow out of the drilled holes. After the foam stops growing, you can let go of the board. Do not demold for at least 20 minutes.

APPLICATION:
Silicone Foams can be used for a variety of industrial and special effects applications including making foam filled appliances, padding/seat cushioning, orthotics/orthopedics, potting and encapsulation of electrical circuits and vibration dampening.


ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.

What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.

For more information, welcome to contact Lilian:
Wechat / Phone: 8613617490457
E-mail: lilian(at)xrsil(dot)com
Skype: lilian-xrsilicone
Company: Dongguan Xinrun Silicone New Materials Co., Ltd / Xinrun Group Limited
Factory address: No.2,Zhouliao Road, Langzhou Industrial Zone,Changping, Dongguan, Guangdong, China

Price and Minimum Quantity

Price: $4.8 - $7.5
MOQ: Not Specified
File a complaint
Rate This Member
Supplier Of Silicon

Recent User Reviews

This user has not received any reviews yet!

Verification Status

 
 
Contact Supplier
Renew

More Items Similiar to: Foams Making Silicone Rubber

GOLD Member
VERIFIED
Apr-16-21
Ferro Silicon

Ferro Silicon

(4.8)
Ask for price
MOQ: Not Specified
  Emarc India
Supplier From Faridabad, Haryana, India
Supplier Of Silicon
 
We are exporter of Ferro Silicon.

FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.
Aug-16-10
Silicone rubber foam pad

Silicone Rubber Foam Pad

(1.3)
$2
MOQ: Not Specified
  Honeywon Silicone Products Co., Ltd.
Supplier From Huizhou, Guangdong Province, China
Supplier Of Silicon Sheets
 
Honeywoní»s silicone sponge is with high grade silicone rubber material and inimitable technique, with
Good character of high temperature resistant, aging resistant, ozone resistant, insulation property, fuel
Oil resistance, lubes resistance, no smell and wear well. High compressibility and low compression set
Over a wide temperature range, and good acoustic and thermal insulation properties. Apply to -50í
~+200í protect and heat insulation for long term continuous use and -70í ~ +260í for intermittent
Use on all kinds of machine.

Feature:

Standard size(mm)í+ 290*380*ú¿5-15) 380*380*(5-15) 400*600*(5- 15) 500*500*(2-30)
500*600*(5-15) 600*800*(5-15) 1000*1000*(5-12) 1000*1200*(5-12)

Special size(mm)í+minimum length:no limitation maximum length:no limitation, or in roll
Minimum width:no limitation maximum width:1200 minimum thickness:3.0 maximum
Thickness:30.0

Product colorí+ redú¼greyú¼natural, whiteú¼black or any other required color

Applicationí+ heat transfer print equipment, electronics and electrics, machine and sealcharacterí+high temperature resistant, aging resistant, ozone resistant, insulation property, fuel oil
Resistance, lubes resistance, no smell and wear well, good acoustic and thermal insulation properties.


í÷ technical indexú¦
Styleú¦ open cell
Surfaceú¦double fabric impression
Tear strengthú¦55kn/m
Press strengthú+30mpa
Elongationú¦100%
Hardnessú¦8-50 shore a
Temperature rangeú¦-50-220c continuously; -70í ~ +260í for intermittent use
Densityú¦0.55-0.9g/cm3
Flame resistanceú¦94v-0
Dielectric breakdown voltageú¦>3kv
Dielectric constantú¦5.5 khz
Tensile strength: 10-30psi
Volume resistanceú¦1.*1011 ohm-m
Thermal conductivityú¦0.1 w/m-k
Thick tolerance: ía0.05mm~0.1mm
Dec-01-09
Mold making silicone rubber

Mold Making Silicone Rubber

(1.3)
$4.50 - $8.50
MOQ: Not Specified
  Hong Ye Jie Technology Co., Ltd
Supplier From Shenzhen, Gongdong, China
Supplier Of Silicon Sheets
 
Mold making silicone rubber is primarily intended for poly resin crafts, pu crafts, pu resin crafts , gypsum crafts , unsaturated resin crafts, lighting and candles crafts , plastic toy stationery gifts crafts industry, a large statue buddha, furniture, furniture decorative materials, statues buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils factory, europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. any more information, please feel free to contact.


25kg /drum 200kg /drum
Jan-06-17
Manual Mold Making Silicone Rubber

Manual Mold Making Silicone Rubber

(1.1)
$4.80 - $7.50
MOQ: Not Specified
  Dongguan Xinrun Silicone New Materials Co., Ltd.
Supplier From Dongguan, Guangdong, China
Supplier Of Silicon
 
INTRODUCTION:
This is a kind of room temperature vulcanized silicone rubber in condensation type. It's generally named as two part silicone rubber, Part A is a flowable liquid, part B is the curing agent or catalyst. It's mainly used for mold making.

This Silicone rubber is with good fluidity and moderate hardness which is suitable for middle size product with pattern by pouring operation, especially popular for manufacturer of resin crafts and gypsum decoration. Besides,

additive is available for brushing operation. It's one of our best selling silicone!

PRODUCT FEATURES:
*An exceptional fluidity and good operability, easy to demold
*Moderate hardness
*High tensile and tear strength
*Good flexibility
*Cure at room temperature
*Outstanding bubble releasing
*High duplication times

OPERATION INSTRUCTIONS OF MANUAL MOLD DESIGN MAKING LIQUID SILICONE RUBBER RAW MATERIALS:
Step 1: prepare the original molds
Step 2: Take 100G parts A and add 3G parts B and mix them evenly.
Step 3: Vacuum pumping
Step 4: Pouring casting or Brush operation
(For the detail of operation instructions,please contact us)


SHELF LIFE :
Twelve(12) months when stored under dry and cool place by original package under 25 Centigrade.

APPLICATION:
This silicone rubber is used for making molds of concrete stone,GRC, gypsum decoration, plaster ornaments, fiberglass products, polyester decoration, unsaturated resin crafts, polyresin crafts, polyurethane, bronze, wax, candle, and similar products .

ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.

What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
Nov-09-16
Liquid Silicone Rubber For Mold Making

Liquid Silicone Rubber For Mold Making

(1.1)
$4 - $8
MOQ: Not Specified
  Dongguan Guochuang Organic Silicone Material Co., Ltd.
Supplier From Dongguan, Guangdong, China
Supplier Of Silicon
 
1.Description of liquid silicone rubber
C830 Silicone rubber is condensation cure silicone rubber for mold making. The silicone rubber will be cured under room temperature, It’s two-components, the mixing ratio is 100:2 . Part A is a flowable liquid silicone , part B is the catalyst. It has an exceptional fluidity and good operability. C-830 tin cure mold silicone has a good property , it is suitable for various mold making .

2.Characteristics of liquid silicone rubber
*An exceptional fluidity and good operability, easy to demold
*Good tensile strength and tear strength
*lower shrinkage
*non-deformation ,non-oily
*good flexibility
*eco-friendly
*long shelf-time &lifetime

3.Application of liquid silicone rubber
stone mold ,concrete mold , cement casting mold
polyurethane casting mold , GRC casting mold , fiberglass cating mold
statue mold , sculpture mold , resin craft mold ,artificial wooden mold
gypsum mold , plaster mold ,bronze casting mold
candle mold ,soap mold, shoe mold , tyre mold ,etc .....

C830 Silicone rubber is mainly suitable middle sized product and big size with simple pattern.



Package:
1kg/drum,5kgs/drum,20kgs/drum,25kgs/drum,200kgs/drum based on vacuum packing.
Shelf life and transportation
1. Twelve(12) months when stored at 25C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
Nov-09-16
Liquid Silicone Rubber For Mold Making

Liquid Silicone Rubber For Mold Making

(1.1)
$4 - $8
MOQ: Not Specified
  Dongguan Guochuang Organic Silicone Material Co., Ltd.
Supplier From Dongguan, Guangdong, China
Supplier Of Silicon
 
1. Description of rtv 2 liquid silicone rubber for frame gypsum molds
C830 silicone rubber is condensation cure silicone rubber (tin cure silicone rubber) for mold making. The silicone rubber will be cured under room temperature. It's two components, the mixing ratio is 100:2. Part A is a flowable liquid silicone, part B is the catalyst. It has an exceptional fluidity and good operability.

2. Characteristics of rtv 2 liquid silicone rubber for frame gypsum molds
* An exceptional fluidity and good operability, easy to demold
* Good tensile strength and tear strength
* Suitable hardness
* Copy detailed pattern
* Good flexibility
* Eco-friendly
* Long shelf-time &lifetime

3. Application of rtv 2 liquid silicone rubber for frame gypsum mold
C830 liquid silicone rubber is perfect molding material, it is suitable to make mold for concrete casting, artificial stone, brick, cement casting, gypsum decorations, plastic product, resin craft, polyester, polyurethane, bronze casting, statues, jewelry, wax, crystal, tire mold, shoe mold, clay casting, ceramic casting. etc.
C830 liquid silicone rubber is mainly suitable for small or middle sized products with delicate pattern by pouring and brushing operation.


Package
1kg/drum,5kgs/drum,20kgs/drum,25kgs/drum,200kgs/drum.

Shelf life and transportation
1. Twelve(12) months when stored at 25C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
Jan-06-17
Ceramics Mold Making Rtv 2 Silicone Rubber

Ceramics Mold Making Rtv 2 Silicone Rubber

(1.1)
$4.80 - $7.50
MOQ: Not Specified
  Dongguan Xinrun Silicone New Materials Co., Ltd.
Supplier From Dongguan, Guangdong, China
Supplier Of Silicon
 
FEATURES:
-Mixing ratio of catalyst 2%-5%
-Good flowability
-Great self-deaeration
-Very good heat resistance
-High thermal conductivity
-Outstanding release properties
-High tear resistance
-Low shrinkage
-Outstanding resistance to inhibition
-Good resistance to polyester resin and concrete


SHELF LIFE:
When stored at or below 32°C (89.6°F) in the original unopened containers, such silicone base and its curing agents have a usable life of 12 months.


PACKAGE:
Silicone Base is available in 1Kg, 5Kg, 20Kg, 25Kg and 200Kg containers. Curing Agents are available in 50g, 1Kg and 20Kg containers.

APPLICATIONS:
-Architectural Restoration
-Sculpting/Wax Casting
-Concrete/GRC Casting
-Gypsum/Plaster Decoration
-Polyester/Resin Crafts Molding
-Furniture Molding
-Candles Mold making
-Soaps Mold making
-Tire Molding
-Detailed reproduction of figurines, art objects and similar items


ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.

What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
Nov-21-16
Mold Making Silicone Rubber For Plaster Mold

Mold Making Silicone Rubber For Plaster Mold

(1.1)
$8.55
MOQ: Not Specified
  Guangzhou Ott New Materials Co., Ltd.
Supplier From Gungzhou, Guangdong, China
Supplier Of Silicon
 
1) Applications:
OTT mold making liquid silicone rubber for plaster mold is primarily intended for poly resin crafts, PU crafts, PU resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candles crafts , plastic toy, stationery gifts crafts industry, a large statue Buddha, relief, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe componentfactory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.


2) Description:
OTT mold making liquid silicone rubber for plaster mold is white or red flowing liquid with general hardness of 22-50A after curing. Molding silicone is a kind elastic silicone which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tears strength and elongation.
Nov-17-16
Rtv Molding Silicone Rubber For Mold Making

Rtv Molding Silicone Rubber For Mold Making

(1.1)
$5.85 - $8.58
MOQ: Not Specified
  Guangzhou Ott New Materials Co., Ltd.
Supplier From Gungzhou, Guangdong, China
Supplier Of Silicon
 
Liquid RTV Molding Silicone Rubber raw material for all kinds of mold making

Features of liquid RTV Molding Silicone Rubber raw material for all kinds of mold making:

1. Two part of liquid fluid: liquid white silicone and curing agent.
2. Cure at room-temperature within 4-8 hours, but all performance will act perfectly when it cure within 2 - 4 hours.
3. Good fluidity and excellent operation.
4. Good resistance to weather, temperature, aging, acid.
5. Excellent tear strength, comfortable duplication times.


Application of liquid RTV Molding Silicone Rubber raw material for all kinds of mold making:

1.Resin crafts, unsaturated resin crafts
2. Poly resin crafts, candle crafts, plastic crafts
3. Making molds forgypsum,GRC,concrete,Artificial stone products molding,Wax casting
4.Decoration building mold making
5.Lighting & candles crafts,stationery gifts,crafts industry
6.Casting for Statue,Buddha, Christmas ornaments,sculptures, figures etc

Operation Instruction for Liquid RTV Molding Silicone Rubber raw material for all kinds of mold making :

RTV-2 liquid mold silicone rubber is a kind of flowing liquid, and it consists of two component, part a is a flow-able liquid silicone rubber, part B is the curing agent.

1. Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber, add 2%~3% cuing agent of the amount of silicon and mix themevenly.

2. Then after vacuum-pumping the mixture, you can pour it into the mold frame.

3. The silicone mold will cured in 2~3 hours.

Note: the time for vacuum-pumping should be less than 3-5mins, otherwise, once the silicone rubber has cross-link reaction during vacuum. it will not be operated.
Search More Like "Foams Making Silicone Rubber"

Verification Status

go4WorldBusiness +91-89298-00770 52B, First Floor, Okhla Phase-3 New Delhi, INDIA 110020
© go4WorldBusiness.com