can supply REBARS as per below: -Size: 6mm to 50 mm -Length: 6 meters up to 16 meters -Packing: Once folded bundles available.
hese corrugated steel bars are used as tension devices in the construction of concrete slabs and walls, as well as decorative/ornamental grille work. When used in concrete constructions, these help to strengthen and hold concrete when it is compressed, and come in a wide variety of sizes to fit various building construction needs. At ARC. AVAILABLE IN 3/8 (10mm), 5/8 (16mm), (20mm), (12mm), 1 (25mm) and 1 (32mm)
Concrete Reinforced Mesh is widely used as bridge reinforced mesh, road construction mesh, floor reinforced mesh, trench mesh, Concrete slab mesh, Masonry mesh and brick wall reinforced mesh, which is used in construction reinforcement, the ground for the tunnels, bridges, highway and airport, wharf and wall. It is a type of convenient and economical reinforcement option for modern concrete structures.
Specification of concrete reinforced mesh:
(1)Material:plain steel bar, stainless steel rebar rods.
(2)Steel rods style: ribbed or smooth.
(3)Rebar Diameter: 3 mm - 40 mm.
(4)Mesh shape: square or rectangular .
(5)Distance between rods : 50,100, 150, 200,300, 400 mm.
(6)Mesh sheet width: from 650 mm to 3800 mm.
(7)Mesh sheet length: 850 mm, 6 m, 9 m, 12 m.
Features of concrete reinforced mesh:
(1)High strength.
(2)Anti-crack and anti-shock.
(3)Hot-dip galvanized or epoxy coating after the manufactures
(4)Anti-corrosion, acid-resisting.
(5)Easy to install
Applications of concrete reinforced mesh:
(1)Concrete reinforced mesh is used as bridge reinforced construction and building, like bridge girders, bridge spans, bridge decks.
(2)Concrete reinforcing mesh used in median barriers, tunnel segments, box culverts, airport and wharf.
(3)Concrete reinforcing mesh used in residential, industrial and road construction, such as concrete footpaths and industrial and commercial ground slabs, precast panel construction and residential slabs and footings.
(4)Constructional uses: block slab structure reinforcing, and hollowed slabs reinforcement, building wall reinforcement and support wall reinforcement.
(5)Used as coal mine supporting mesh for coal mine roadway supporting.
Concrete reinforcement mesh is classified ribbed concrete reinforcement mesh and plain steel wire concrete reinforcement mesh. The wire of ribbed concrete reinforcement mesh is 3 faces indentation.Please see figuer
Concrete reinforcement mesh is always used on residential slabs and footing-construction and BCA complying with AS 2870,which is always paced in all reinforced conrete members to stop the concrete cracking.
And F62/F72/F82/F92/F1018 concrete reinforcement mesh is old specification,was replaced by SL62/SL72/SL82/SL92/RL1018.For example:previously called F62(now SL62) is wire diameter 6mm bars welded together in a 200mm square grid.the panel size is 2.4m X6m.
The Tensile strength is 300Mpa.
Heyou factory can produce concrete reinforcing mesh which is the specification of New Zealand standard AS-NZS 4761-2001.
Details of concrete reinforcing mesh:
Material: 250N, 500N, 500L, 300E, 500E
Mesh Pitch: 200mm
Wire: ribbed steel wire & plain steel wire
Overhang length of two sides: 100mm
Wire diameter:6mm, 7mm, 8mm, 9mm
Size: 2.4m * 6m or 2.2m * 5.8m
Packing: 1ton more or less per bundle
HS code: 73142000
Production Standard: AS-NZS 4671-2001
The specification of concrete reinforcing mesh as below
concrete reinforcing mesh specification
Mesh Type and reference number Longitudinal bars Cross-bars Mass for 6x2.4m sheets Cross-sectional area/m width
No. x dia., mm Pitch, @mm No. x dia., mm Pitch, @mm Unit area, kg/sqm Sheet, kg Long' l bars, sqmm/m Cross bars, sqmm/m
Structural and skatch
SE92 13 X9.0 200 30 X9.0 200 5.0 75 318 318
SE82 13 X8.0 200 30 X8.0 200 3.9 59 251 251
SE72 13 X7.0 200 30 X7.0 200 3.0 45 192 192
SE62 13 X6.0 200 30 X6.0 200 2.2 33 141 141
Non-structural
SL51.5 17 X5.3 150 40 X5.3 150 2.2 32 147 147
SL41.5 17 X4.0 150 40 X4.0 150 1.3 19 84 84
Are you a Manufacturer?
Heyou wire mesh factory as a professional factory for reinforcement mesh, which has 10 workshops, more than 200 workers, advanced production line,perfect production process, Strict production regulations.
We own ourselves laboratory for inspected chemical composition and mechnical property of raw material, drawn wire diameter measuring,cutting wire length measurement, and full pieces of concrete reinforcing mesh which contained pitch of wire to wire, shearing resistance, tensile strength, yeild strength, elongation, bend test, weight tolerance, size tolerance, ribbed height, pitch of transverse wire ribbed, surface quality and etc. We're strictly to do everything in order to guarantee our concrete reinforcing mesh quality.
Therefore, Heyou Wire Mesh has a high reputation in our field as real manufacturer.
Concrete welded Reinforcing mesh is a welded wire fabric, prefabricated steel reinforcement material. It has a rectangular or square grid pattern and is produced in flat sheets.
The fabric is used to provide tensile strength and crack control to structural concrete elements.
Advantages:
Concrete Welded mesh reinforcingis a convenient and cost effective alternative to conventional bar reinforcement for the following reasons :
The mesh is generally specified and manufactured according to standard references making for easy site identification, quality control and management.
The mesh is manufactured in sheets or rolls resulting in a quick and simple site installation process.
Although generally used in surface beds (concrete floor slabs on fill) and concrete roads, mesh can also be used in suspended floor slabs, concrete walls, culverts / drains and composite brick / concrete retaining walls.
Square Reinforcing Mesh Standard Sheets - 6 m (length) x 2.4 m (width) = 14.4 m²:
REFERENCE MAIN WIRE(mm) CROSS WIRE(mm) EDGE WIRE(mm) MASS(kg)
SL81 7.60@100 7.60@100 7.60@100 105
SL102 9.50@200 9.50@200 9.50@200 80
SL92 8.55@200 8.55@200 8.55@200 65
SL82 7.60@200 7.60@200 7.60@200 52
SL72 6.75@200 6.75@200 6.75@200 40
SL62 6.00@200 6.00@200 6.00@200 33
SL52 4.75@200 4.75@200 4.75@200 21
Rectangular Reinforcing Mesh Standard Sheet - 6 m (length) x 2.4 m (width) = 14.4m².
REFERENCE MAIN WIRE(mm) CROSS WIRE(mm) MASS(kg)
RL718 25*6.75@100 30*7.60@200 68
RL818 25*7.60@100 30*7.60@200 79
RL918 25*8.55@100 30*7.60@200 93
RL1018 25*9.50@100 30*7.60@200 109
RL1118 25*10.65@100 30*7.60@200 131
RL1218 25*11.90@100 30*7.60@200 157
Concrete Reinforcing Mesh Panel also called: Steel Bar Welded Wire Mesh /reinforcing welded mesh panel,cold ribbed steel bar mesh,welded wire mesh.
Material: steel bar
Weaving: the wires that run parallel to the width of the roll are placed on top of the wires running parallel to the length. Then, the wires are welded where they intersect.
Wire diameter: welded steel bar panels ranges from 5mm to 16mm.
Applications: Welded steel bar panels are widely used in construction reinforcement, the ground for the tunnels, bridges, highway, airport and wharf, also in construction of wall body.
Features: Solid construction, Easy handling
Packing: PVC Shrink, Moister-proof paper, Carton, pallet, Wooden Box , Special packing can be arranged upon request
Reinforcement mesh is a welded wire fabric, prefabricated steel reinforcement material. It has a rectangular or square reinforcement mesh grid pattern and is produced in flat sheets. Reinforcement mesh sheets are usually 6m long x 2.4m wide as standard.
Concrete reinforcing mesh is superior quality welded wire mesh panels with flat even surface, firm structure. This welded wire mesh panel offers flat even surface and firm structure. It can be used extensively in building, food, agriculture, and serve in construction and fencing applications.
We offer three types of concrete reinforcing meshes: welded stainless steel wire mesh panels, galvanized welded mesh panels, and hot-dip zinc plating welded mesh panels. The reinforcing mesh length does not limit.
Applications: industrial, manufacturing, guarding, security, enclosures, large animal enclosures, quarantine caging, fencing and gabions.
SE92/SE82/SE72/SE62 concrete reinforcing mesh for structural using
Heyou factory can produce concrete reinforcing mesh which is the specification of New Zealand standard AS-NZS 4761-2001.
Details of concrete reinforcing mesh:
Material:250N,500N,500L,300E,500E
Mesh Pitch:200mm
Wire:ribbed steel wire & plain steel wire
Overhang length of two sides:100mm
Wire diameter:6mm,7mm,8mm,9mm
Size:2.4m*6m or 2.2m*5.8m
Packing:1ton more or less per bundle
HS code:73142000
Production Standard: AS-NZS 4671-2001
More feature of concrete reinforcing mesh as below:
Signel-bar meshes Twin-bar meshes
Plain concrete reinforcing mesh Ribbed concrete reinforcing mesh
The ribbed is visible and deep notch.
high quality steel bar as raw materials Resposibility worker for drawing,straightened and cut
Electric resistance welding,the solder joint firmly and beautiful appearance Full auotamatic machine opreation,the panel size high accuracy,
Neatly packing Big place and enough warehouse for stocks
The specification of concrete reinforcing mesh as below
concrete reinforcing mesh specification
Mesh Type and reference number Longitudinal bars Cross-bars Mass for 6x2.4m sheets Cross-sectional area/m width
No. x dia., mm Pitch,@mm No. x dia., mm Pitch,@mm Unit area,kg/sqm Sheet,kg Longâ??l bars,sqmm/m Cross bars,sqmm/m
Structural and skatch
Heyou wire mesh factory as a professional factory for reinforcement mesh,which has 10 workshops,more than 200 workers,advanced production line,perfect production process, Strict production regulations.
We own ourselves laboratory for inspected chemical composition and mechnical property of raw material,drawn wire diameter measuring,cutting wire length measurement ,and full pieces of concrete reinforcing mesh which contained pitch of wire to wire,shearing resistance,tensile strength,yeild strength,elongation,bend test,weight tolerance,size tolerance,ribbed height,pitch of transverse wire ribbed,surface quality and etc. We are strictly to do everything in order to guarantee our concrete reinforcing mesh quality.
Therefore,Heyou Wire Mesh has a high reputation in our field as real manufacturer.
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer)
Basalt fiber reinforcement (new material to replace reinforcement)
Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã??
Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters)
1. The cost is the same as that of ordinary reinforcement;
2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa,
3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust.
4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges.
5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement.
6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
REINFORCED WELDING GLOVES (RWG200) :
Palm & Top made of Natural/Colored Cow
Split Leather
Wing Thumb
Reinforced Round Thumb with Cow Split Leather
One Piece Back
Half Fleece & Half Cotton Lining
35cm long
Supplier From
Dnepropetrovsk,
Dnepropetrovsk Region,
Ukraine
Aneealed wire, steel wire, low-carbon steel wire of general purpose, gost 3282-74 (din 177); low-carbon steel wire of general purpose, heat-treated, gost 3282-74 (din 177); low-carbon cold-drawn wire for reinforcement of ferroconcrete structures, gost 6727-80; welding wire of low-carbon steel, sv08a, gost 2246-70 (din 17145); splint pin, reinforcement mesh, hardware.
According to the wire diameter and opening, we can offer standard welded wire mesh or heavy type welded wire mesh.
Differernt processing means we offer for your choice include: hot-dip galvanized welding wire mesh; hot-dip galvanized before welding wire mesh; electric-galvanised after welding wire mesh; electric-galvanised before welding wire mesh.
Rectangular Mesh products in 6.0m x 2.4m sheet sizes are general-purpose ribbed mesh sheets used to reinforce concrete slabs.
*SPECIFICATIONS*
Material Carbon Steel
Grade 500 Mpa
Length 6000mm x 2400mm
Main Wire: 6.75@100, 7.60@100. 8.60@100, 9.50@100, 10.70@100, 11.90@100 mm
Cross Wire: 7.60@200 mm
*STANDARDS*
Manufactured in accordance with AS/NZS 4671:2019
ACRS Certified
NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS)
*PACKAGING*
Unit of Measure Sheets
Pack Type Bundles
FCL Quantity 25MT
Square Mesh products in 6.0m x 2.4m sheet sizes are general-purpose ribbed mesh sheet used to reinforce concrete slabs.
*SPECIFICATIONS*
Material Carbon Steel
Grade 500 Mpa
Length 6000mm x 2400mm
Main Wire (mm): 6.00@200, 6.75@200, 7.60@200, 8.60@200, 9.50@200, 7.60@100 mm
*STANDARDS*
Manufactured in accordance with AS/NZS 4671:2019
ACRS Certified
NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS)
*PACKAGING*
Unit of Measure Sheets
Pack Type Bundles
FCL Quantity 25MT
Trench Mesh products in 6.0m x (200mm, 300mm, 400mm, and 500mm) sheet sizes and are a general-purpose ribbed mesh sheet used to reinforce concrete slabs with a narrow profile.
*SPECIFICATIONS*
Material Carbon Steel
Grade 500 Mpa
Length 6000mm x (200mm, 300mm, 400mm, or 500mm);
width is dependent on number of wires (3,4, 5, or 6)
Main Wire: 7.60@100, 10.70@100, 11.90@100 mm
Cross Wire: 4.00@300, 4.75@300 mm
*STANDARDS*
Manufactured in accordance with AS/NZS 4671:2019
ACRS Certified
NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS)
*PACKAGING*
Unit of Measure Sheets
Pack Type Bundles
FCL Quantity 25MT
