Brick wall reinforcement mesh is welded wire sheet for reinforced concrete construction. It is used in building surface, wall, ground, bridge, bank and airport. And its feature is that welding spots of warp wire and weft wire are on the same surface. Wire diameter: 2.5-6.0 mm Width: 5cm-27cm Length: 3mm. Spacing: 40cm Surface treatment: welded after hot dipped galvanized, welded after electro galvanized, welded before electro galvanized, welded before hot dipped galvanized, welded by stainless steel wire. We have two types of brick wall reinforcement mesh: truss-mesh reinforcement and ladder-mesh reinforcement. Package: carton/pallet/plastic wrapped. Package: carton/pallet/plastic wrapped.
Reinforcement mesh is a welded wire fabric, prefabricated steel reinforcement material. It has a rectangular or square reinforcement mesh grid pattern and is produced in flat sheets. Reinforcement mesh sheets are usually 6m long x 2.4m wide as standard. Concrete reinforcing mesh is superior quality welded wire mesh panels with flat even surface, firm structure. This welded wire mesh panel offers flat even surface and firm structure. It can be used extensively in building, food, agriculture, and serve in construction and fencing applications. We offer three types of concrete reinforcing meshes: welded stainless steel wire mesh panels, galvanized welded mesh panels, and hot-dip zinc plating welded mesh panels. The reinforcing mesh length does not limit. Applications: industrial, manufacturing, guarding, security, enclosures, large animal enclosures, quarantine caging, fencing and gabions.
The longitudinal and transverse reinforcement bars are welded into concrete wire mesh. The concrete meshes have a more dense spacing of the steel bar. Concrete wire mesh is also named welded steel fabric. Application: concrete wire mesh is used for coal mine tunnel network protection or reinforcement, concrete pavement, bridge deck pavement, airport runway, tunnel lining, housing floor, roof, wall, floor, concrete pipes and so on. Advantages: concrete wire mesh for a new, efficient and high-quality steel reinforced concrete structures can be reinforced to reduce the installation of a large number of working hours, less than banding employment nearly approached net 50% - 70%. Concrete wire mesh can help to prevent the emergence of concrete cracks and development, roads, floors, floor welding network configuration can reduce the surface of concrete about 75 percent split.
Concrete slab mesh is reinforced welded wire mesh panels. This reinforced welded wire mesh panels are made of galvanized welded wire mesh for constructional uses. For example, block slab structure reinforcing, and hollowed slabs reinforcement, building wall reinforcement and support wall reinforcement. It has the continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls. Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction. Variety: truss mesh reinforcement. Ladder mesh reinforcement. Available material: hot dipped galvanized, electro galvanized or stainless steel.
Continuous high chair with plastic tip provides support for upper slab steel from slab form. It height is from 2" to 15" in 5'-0" lengths. Legs are spaced 7-1/2" on centers. It is available in bright basic, plastic-protected, galvanized, and epoxy-coated and stainless steel. Application: support upper slab steel from slab form surface. They are substitutes for individual chair supports. Continuous high chair upper Continuous high chair upper is used for supporting one layer of steel above another and spacing them to required distance. Standard leg spacing is 7-1/2" on centers. Heights and lengths are same as slab bolsters. It is made in standard 5'-0" lengths. It is available in bright basic, plastic-protected, galvanized, epoxy-coated and stainless steel.
Wire diameter for welded steel bar panels: ranges from 5mm to 12mm Welded bar panels opening: 50mm to 300mm Panel length: 100cm to 1200cm Panel width: 100cm to 300cm
RL1218 concrete reinforcement welded mesh 25*11.90@100 by 30*7.60@200 Main hole size: 200x200mm, edge 200x100mm Sheet size: 2.4m x 6m
we can offer galvanized or PVC coated welded wiremesh, in roll or in panel
Concrete Reinforced Mesh is widely used as bridge reinforced mesh, road construction mesh, floor reinforced mesh, trench mesh, Concrete slab mesh, Masonry mesh and brick wall reinforced mesh, which is used in construction reinforcement, the ground for the tunnels, bridges, highway and airport, wharf and wall. It is a type of convenient and economical reinforcement option for modern concrete structures. Specification of concrete reinforced mesh: (1)Material:plain steel bar, stainless steel rebar rods. (2)Steel rods style: ribbed or smooth. (3)Rebar Diameter: 3 mm - 40 mm. (4)Mesh shape: square or rectangular . (5)Distance between rods : 50,100, 150, 200,300, 400 mm. (6)Mesh sheet width: from 650 mm to 3800 mm. (7)Mesh sheet length: 850 mm, 6 m, 9 m, 12 m. Features of concrete reinforced mesh: (1)High strength. (2)Anti-crack and anti-shock. (3)Hot-dip galvanized or epoxy coating after the manufactures (4)Anti-corrosion, acid-resisting. (5)Easy to install Applications of concrete reinforced mesh: (1)Concrete reinforced mesh is used as bridge reinforced construction and building, like bridge girders, bridge spans, bridge decks. (2)Concrete reinforcing mesh used in median barriers, tunnel segments, box culverts, airport and wharf. (3)Concrete reinforcing mesh used in residential, industrial and road construction, such as concrete footpaths and industrial and commercial ground slabs, precast panel construction and residential slabs and footings. (4)Constructional uses: block slab structure reinforcing, and hollowed slabs reinforcement, building wall reinforcement and support wall reinforcement. (5)Used as coal mine supporting mesh for coal mine roadway supporting.
