The Micropack System is convection cooled, designed for less power-hungry applications, but still with system functionality options to match any requirements. Use as stand-alone or in a flexible off-the-shelf configurable system.
The Micropack Power System extends your network one step further. With load ranges typically between 120W and 1000W, and in 12, 24, and 48V options, the system is perfect for a great variety of applications.
PRODUCT DESCRIPTION
The basic power core has 4 rectifier positions and can be configured as a bulk DC output feed, or integrated 1 or 2 pole distribution.
The power core is prepared for any Micropack rectifier module and the system output can be either of the following: (based on module
choice)
12V/120 480W / 10 40A
24V/240 960W / 10 40A
48V/250 1000W / 5.2 21A
The system has two options for monitoring and control, by the Compack controller, or if the display or extended controller functionality is needed it can be configured with Smartpack2 controller On the lower left side of the box there is space for optional backup batteries
(4x12V/7Ah, only with bulk DC output) .
A simple removable front cover gives good access for installation and connections.
Eltek Micropack System is convection cooled, designed for less power-hungry applications, but still with system functionality options to match any requirements. Use as stand-alone or in a flexible off-the-shelf configurable system.
Eltek Micropack Power System extends your network one step further. With load ranges typically between 120W and 1000W, and in 12V, 24V, and 48V options, the system is perfect for a great variety of applications.
Eltek Micropack 48V/250W Rectifier
Micropack Wallbox
Power Supply System 12V/480W, 24V/960W or 48V/1000W
Compact wall-mounted power supply system
PRODUCT DESCRIPTION
The basic power core has 4 rectifier positions and can be configured as a bulk DC output feed, or integrated 1 or 2 pole distribution.
The power core is prepared for any Micropack rectifier module and the system output can be either of the following: (based on module
choice)
12V/120 480W / 10 40A
24V/240 960W / 10 40A
48V/250 1000W / 5.2 21A
The system has two options for monitoring and control, by the Compack controller, or if the display or extended controller functionality is needed it can be configured with Smartpack2 controller On the lower left side of the box there is space for optional backup batteries
(4x12V/7Ah, only with bulk DC output) .
A simple removable front cover gives good access for installation and connections.
Power Supply System 12V/480W, 24V/960W, or 48V/1000W
Compact wall-mounted power supply system
Eltek Micropack wallbox has been designed for industrial and telecom applications with power requirements in the range of 120- 1000W. With its compact design and simple installation and optional
internal backup batteries make it a really â??microâ?? DC backup system.
V2500A Eltek V-Series rectifier modules provide
unprecedented power density and in a truly
compact, plug-and-play format. With a wide range
of available voltages, power ratings, and system
form factors, Elteks power modules allow optimally
system design and cost-effective deployment from
initial install to future upgrades.
The KING SC-101224 continues the huge success of one of the most used SHS (Solar Home System) controllers. With a power range to 10A at automatically recognised 12V or 24V. It fits to a system size of maximum 240W.
The latest charging technologies, combined with a new state of charge determination which has been significantly improved once again. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display.
Product Features
- Microcontroller digital accuracy
- PWM control- Multistage charging technology
- Load disconnection depending on LVD
- Automatic load reconnection
- Temperature compensation
- Common positive grounding on one terminal
- Integrated data logger(optional)
- Night light and morning light function
-Integrated self test
- Automatic detection of voltage
Displays
- Graphical LCD display
- for operating parameters, fault message, self test
Certificates
- CE compliant according EN61000-6-1 and EN61000-3- RoHS compliant
- Manufactured according to SIO9001 and ISO14001
Electronic protection functions
- Overcharge protection
- Deep discharge protection
- Reverse polarity protection of module, load and battery
- Automatic electronic fuse
- Short circuit protection of load and module
- Open circuit protection at nigh
t- Reverse current protection at night
- Overload protection
- Battery over voltage shutdown
For more details----http://www.king-inttrade.com/SC-101224.html
ELTEK FLATPACK2 48V/3000W HE Rectifier Module 241119.903
INPUT DATA
Voltage (nominal) 176 - 275 VAC
Voltage (operating range) 85 - 300 VAC
Frequency 45 - 66 Hz
Current (maximum) 19 ARMS
Power Factor > 0.99 at 50-100% load
Protection Fuse in L & N, Varistor, Shutdown above 300 VAC
OUTPUT DATA
Voltage (default) 53.5 VDC
Voltage (adjustable range) 43.2 - 57.6 VDC
Power @ 230 VAC 3000 W
Power @ 85 VAC 1380 W
Current 62.5 A (@ 48 VDC)
Current sharing (10 - 100% load) �±5% of maximum current from 10 to 100% load
Static Voltage regulation (10 - 100% load) �±0.5%
Dynamic Voltage regulation �±5.0% for 10-90% or 90-10% load variation, regulation time < 50ms
Hold up time, 1500 W / 3000 W output power >20ms / >10ms ; output voltage > 43 VDC
Ripple < 150 mV peak to peak, 30 MHz bandwidth
Protection
Fuse, Short circuit proof, High temperature protection, Overvoltage shutdown,
Hot plug-in inrush current limiting
Flatpack2 48V SHE Rectifiers
Flatpack2 48V Super HE
48/2000 SHE
Eltek Flatpack2 48V Super HE rectifiers are contributing to setting the new industry standard for efficiency in the DC power market.
With an efficiency of 97.8%, the Super HE is a premium rectifier particularly suitable for markets and applications where the energy is costly. In grid-connected applications, the payback time is down to 2 years compared to standard HE rectifiers, and in hybrid applications even faster.
Eltek Flatpack2 Super HE is fully compatible with Flatpack2 and Flatpack2 HE systems and can replace any Flatpack2 48V rectifier module.
Model Flatpack2 380/3000 HE (UI)
Part number 241119.825
INPUT DATA
Voltage (nominal) 176 - 277 VAC / 260 - 400 VDC1)
Voltage (range) 85 - 305 VAC / 260 - 410 VDC1)
Frequency 45 - 66 Hz / 15 - 18.5 Hz2) / DC1)
Current (maximum) @ nominal input, full load 18.2 ARMS
Power Factor > 0.99 at 50% load or more
Protection
Fuse in L & N
Varistor
Disconnect when VIN is out of range
OUTPUT DATA
Voltage (default) 381 VDC
Voltage (adjustable range) 300 - 400 VDC
# Pb cell supported 156 - 168 3)
Power continuous (maximum) 3000 W
Power @ 85 VAC / 85 VDC 1200 W
Current continuous (maximum) 9 A (@VOUT < 336 VDC) / 7.9 A (@ VOUT = 381 VDC)
Current sharing (10 - 100% load) ±5% of maximum current from 10 to 100% load
Static Voltage regulation (10 - 100% load) ±0.5%
Dynamic Voltage regulation ±2.0% for 10-90% or 90-10% load variation, regulation time < 10 ms 5)
Hold up time > 20 ms; output voltage > 300 VDC at 1500 W load
Ripple < 1000 mVP-P , 30 MHz bandwidth
Protection Overvoltage shutdown, Hot plug-in - Inrush current limiting, ORing diode, Fuse5), Short
circuit proof, High temperature protection, Overload shutdown4)
OTHER SPECIFICATIONS
Efficiency @ 230 VAC / 380VDC input 96.2% / 96.6%
Isolation 3.0 kVAC input to output, 1.5 kVAC input to earth, 1.5 kVDC output to earth,
3.0 kVAC CAN to primary, 3.0 kVAC CAN to secondary
Alarms (Red LED) Low mains shutdown, High and low temperature shutdown, Rectifier Failure, Overvoltage
shutdown on output, Fan failure, Low voltage alarm, CAN bus failure
Warnings (Yellow LED) Rectifier in power derate mode, Remote battery current limit activated, Input voltage out
of range, flashing at overvoltage
Normal (Green LED) Input and output ok
Acoustic noise, at nominal input and full load < 40dBA @Tambient< 25C / 40C
MTBF (Telcordia SR-232 Iss.3 Meth. II Case L1) 2 291 210h (@ Tambient = 25 C)
Operating temperature -40 to +75C (-40 to +167F), humidity 5 - 95% RH non-condensing
Output power de-rates linear from 3000W @ 50C (122F) to 980W @ 7C(167F)
Storage temperature -40 to +85C (-40 to +185F), humidity 0 - 99% RH non-condensing
Dimensions[WxHxD] / Weight 109 x 41.5 x 327 mm (4.25 x 1.69 x 13) / < 1.95 kg (4.3 lbs)
DESIGN STANDARDS
Electrical safety EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013, IEC 60950-1:2013, UL
60950-1:2014, CSA C22.2 No. 60950-1-07
EMC EN 61000-6-1:2007, -6-2:2005, -6-3:2007 + A1:2010, -6-4:2007 + A1:2010,
IEC61000-6-5: 2015, EN 300 386:v1.6.1, FCC CFR 47 Part 15:2013
Environment
Tested according to: ETSI EN 300 019: 2-1 (Class 1.2) & 2-2 (Class 2.3)
Normal operating conditions as per IEC 62040-5-3:2016 clause 4.2. Other operating
conditions as per IEC 62040-5-3:2016 clause 4.3, must be advised
2011/65/EU (RoHS) & 2012/19/EU (WEEE)
INPUT DATA
Voltage range 20 - 75 VDC (shutdown < 16.5VDC)
Current (maximum) 70 ADC (85 ADC during boost)
Protection Fuse and reversed polarity protection
OUTPUT DATA
Voltage (default) 26 VDC 53 VDC
Voltage (adjustable range) 24 - 28 VDC 48 - 58.5 VDC
Power (maximum) @ VIN > 26 VDC / VIN = 18 VDC
Power boost 15s / 10min recovery (VIN > 25VDC)
1350 W / 910 W
2000W
Current (maximum)
Current boost 15s / 10min recovery (VIN > 25VDC)
56 A
84 A
28 A
42 A
Static Voltage regulation (0 - 100% load) �±1% �±0.5%
Dynamic Voltage regulation �±5.0% for 10-90% or 90-10% load variation, regulation time < 30ms
Ripple, 20MHz bandwidth < 200 mVpp
Protection Short circuit proof, OR-ing diode, High-temperature protection, Hot plug-in inrush current
limiting, Overvoltage Shutdown
