The door interlocking system is used to control the entry of a person to a secure area such as a clean room, research lab, etc. where dust or small particles may be a problem or security is of high concern. In its simplest form, the door interlocking is composed of 2 doors that are electrically interlocked in such a way that the doors cannot be opened simultaneously. Another example of Door Interlocking is Man trap
The 8 Door Interlocking Terminal can handle up to 8 doors ( 16 IN/OUT switches ).Thus logic can be built up around the number maximum number of doors ( 8 ) i.e. the manner in which they need to open or close.
The Pass-through authorization is validated by a switch or the DIT can operate in a switch-less mode. Spectra’s DIT800 from the Enclava series caters to this requirement of 8 Door Interlocking.
Features:
• Door Interlocking with Buzzer and Led indicator: Door Interlocking Terminal (DIT) controls interlocking of doors 8 doors using DOTL signals. For user interface there is one switch at entry and EXIT side of a door. Buzzer and LED indicators are used to provide users with visual feedback as to when a door may be accessed. For user convenience, a green light is typically used to signify that a door is ready for access and a red light to indicate that a door is un-accessible. (Additional capability providing Digital outputs which may be utilized for up to 4 more relays controlled by the DIT)
• Operations: Only one door may be unlocked or open at one time. Unlocking or opening one door automatically secures all other doors within the designated area. Lock relay contacts will allow low voltage red and green LEDs to be utilized for user feedback.
• Programmable: Door interlocking groups can be programmed for 8 doors. User can program interlocking groups through serial communication.
• Supports switch less operation: DIT can be used without switch in which led will indicates that user can open the door or not. Switch less operation is same as with switch except that all locks will remain open initially and will get closed if one of the doors of interlocking group is open.
Advantages:
• Easy to install and configure
• Switchless operation
• Cost saving
For more feel free to reach out to us in case any clarification is required.
Resilient Technologies
M. No. - +91 9810995267
Visit on: www.resilienttec.com
Corporate office: 578 | UdyogVihar Phase V | Gurgaon – 122001
Branch office: 465 | Pocket E-16 | Rohini | New Delhi – 110085
The door interlocking system is used to control the entry of a person to a secure area such as a clean room, research lab, etc. where dust or small particles may be a problem or security is of high concern. In its simplest form, the door interlocking is composed of 2 doors that are electrically interlocked in such a way that the doors cannot be opened simultaneously. Another example of Door Interlocking is Man trap.
The 4 Door Interlocking Terminal can handle up to 4 doors ( 8 IN/OUT switches ).Thus logic can be built up around the number maximum number of doors ( 4 ) i.e. the manner in which they need to open or close. The 4 Door Interlocking Terminal can handle up to 4 doors ( 8 IN/OUT switches ).Thus logic can be built up around the number maximum number of doors ( 4 ) i.e. the manner in which they need to open or close.
Features:
• Door Interlocking with Buzzer and Led indicator: Door Interlocking Terminal (DIT) controls interlocking of doors 4 doors using DOTL signals. For user interface there is one switch at entry and EXIT side of a door. Buzzer and LED indicators are used to provide users with visual feedback as to when a door may be accessed. For user convenience, a green light is typically used to signify that a door is ready for access and a red light to indicate that a door is un-accessible. (Additional capability providing Digital outputs which may be utilized for up to 4 more relays controlled by the DIT)
• Operations: Only one door may be unlocked or open at one time. Unlocking or opening one door automatically secures all other doors within the designated area. Lock relay contacts will allow low voltage red and green LEDs to be utilized for user feedback.
• Programmable: Door interlocking groups can be programmed for 4 doors. User can program interlocking groups through serial communication.
• Supports switch less operation: DIT can be used without switch in which led will indicates that user can open the door or not. Switch less operation is same as with switch except that all locks will remain open initially and will get closed if one of the doors of interlocking group is open.
Advantages:
• Easy to install and configure
• Easy to install and configure
• Cost saving
For more feel free to reach out to us in case any clarification is required.
Resilient Technologies
M. No. - +91 9810995267
Visit on: www.resilienttec.com
Corporate office: 578 | UdyogVihar Phase V | Gurgaon – 122001
Branch office: 465 | Pocket E-16 | Rohini | New Delhi – 110085
We are suppliers of BEST QUALITY Belgium Tubular Chip Board and looking for serious buyers in need of our products, contact with us for more details.
2135*800*33mm Hollow Door Core Particle Board.
Product name: Hollow door core particle board
Size:2135*800mm
Thickness:33mm,38mm
Material:Pine
Density:350-400kgs/cbm
Grade:E1
Package:14 pallets/40'HQ,1022pcs/40'HQ
Minimum order: One 40'HQ
The door interlocking system is used to control the entry of a person to a secure area such as a clean room, research lab, etc. where dust or small particles may be a problem or security is of high concern. In its simplest form, the door interlocking is composed of 2 doors that are electrically interlocked in such a way that the doors cannot be opened simultaneously. Another example of Door Interlocking is Man trap. The 2 Door Interlocking Terminal can handle up to 2 doors ( 4 IN/OUT switches ).The Pass-through authorization is validated by a switch or the DIT can operate in a switch-less mode. Spectra’s DIT200 from the Enclava series caters to this requirement of 2 Door Interlocking.
Features:
• Door Interlocking with Buzzer and Led indicator: Door Interlocking Terminal (DIT) controls interlocking of doors 2 doors using DOTL signals. For user interface there is one switch at entry and EXIT side of a door. Buzzer and LED indicators are used to provide users with visual feedback as to when a door may be accessed. For user convenience, a green light is typically used to signify that a door is ready for access and a red light to indicate that a door is un-accessible. (Additional capability providing Digital outputs which may be utilized for up to 4 more relays controlled by the DIT)
• Operations: Only one door may be unlocked or open at one time. Unlocking or opening one door automatically secures all other doors within the designated area. Lock relay contacts will allow low voltage red and green LEDs to be utilized for user feedback.
• Programmable: Door interlocking groups can be programmed for 2 doors. User can program interlocking groups through serial communication.
• Supports switch less operation: DIT can be used without switch in which led will indicates that user can open the door or not. Switch less operation is same as with switch except that all locks will remain open initially and will get closed if one of the doors of interlocking group is open.
Advantages:
• Easy to install and configure
• Switchless operation
• Cost saving
For more feel free to reach out to us in case any clarification is required.
Resilient Technologies
M. No. - +91 9810995267
Visit on: www.resilienttec.com
Corporate office: 578 | UdyogVihar Phase V | Gurgaon – 122001
Branch office: 465 | Pocket E-16 | Rohini | New Delhi – 110085
Dcu2000 64 doors anti-tail interlock access control system is made up of software of management center, controllers, door modules, readers or fingerprint scanners, magnetic contacts, open door buttons, locks and alarms. One management center will connect several 485 buses with each having 16 controllers connected but unlimited by tcp/ip, each controller will connect and control 64 doors. There are bidirection doors control, anti-tail interlock, 8 anti-latency zones setup, rf card and password open, access group, keypad and card armed/disarmed, schedule and holiday control, normal open, alarm for overtime open, abnormal open, five times error swiping, tamper, latency, duress
562 Door Interlocking Terminal (Dit 800) Suppliers
Short on time? Let Door Interlocking Terminal (Dit 800) sellers contact you.
YM-350W Single Door EM Locks with Waterproof 800Lbs
Lock Size: 227.6Lx52.6Wx28.3H(mm)
Armature plate: 190Lx45Wx11H(mm)
Holding Force: 350kg(800Lbs)
Voltage: 12/24VDC+10%
Current Draw: 12V/480mA 24V/240mA
Aptational Bracket: ABK-350UL ABK-350L ABK-350ZL
Suitable for: Wooden door, Glass door, Metal door, Fireproof door
Signal Output: Need to order YM-350W-S
Surface Temp: í_+20íµ
Operating Temp: 10í½+55íµ(14-131F)
Suitable Humidity: 0~90%(non-comdensing)
Finishes for Shell: Anodized alninum
Finishes for Magnetic: Zinc
Finishes for Armature: Zinc
Weight: 2.5kg
Standard Packing: 8pcs
54.3*13.5*19.3cm
Melamine is mainly used for manufacturing melamine formaldehyde resin, which is well water, heat and arc resistant and bright. It can also be used in decorative laminates, Amino plastics, adhesive agents, coatings and used as a paper reinforcing agent, textile auxiliaries, cement water-reducing agent and leather retaining agent.
Application:
* Laminates
For table tops, kitchen shelves, platforms, wall cladding, bus bodies, interior of railway coaches, counters, deckings, instrument panels.
* Consumer Moulded Goods
Bowls, trays, spatulas, mixer's base, crockery, cutlery items, launder-able buttons, lamp shades.
* Industrial Moulded Goods
Circuit breakers, television tube support, automotive ignition components, washing machine, agitators, soda fountain parts, switch gears, switch housings, connector plus inserts, wattmeter terminal block, junction boxes, fuse carriers, plating tanks.
* Treatment Resin for Paper
For currencies, toilet paper, facial tissues, shopping and shipping bags, map papers, food wrappers, photographic paper.
* Resin for Lacquer Paints
For motorcars, refrigerator cabinets, washing machines, kitchen equipment, typewriters, water heaters.
* Adhesives
Melamine adhesives from Melamine resins are extra strong, extra tough, highly water resistant and colourless (veneered doors).
* Melamine Resin for Textile Auxiliaries
For providing anti-crease treatment to cotton and other fabrics.
* Leather Chemical
Melamine Formaldehyde resins act as pre-tanning agents.
Whether you need additional office space at your corporate location or a portable office on the job site, Miami Conex has the container 10 foot office containers for you! These portable, secure, durable, and modular ground level office containers are a cost-effective and convenient solution for temporary or permanent office space.
Miami Conex has four standard models ready to order, but if they do not meet your requirements, we can modify a container into the customized office space you need. Our standard mobile office containers are available in gray or beige, feature steel entry doors, double-pane windows, interior finishing including paneling, flooring, baseboard heat, and more. Thereâ??s even an option to install cable!
Choose from a 10-foot, 20-foot, 40-foot, or 40-foot high-cube container, with office space only, or a combination of office and storage space. Miami Conex mobile container offices are fully customized and can be easily transported from one location to another.
10ft Office Containers for Sale
Our� 10 foot� office containers have an outside dimension of� 10â?² x 8.5â?² x 8â?², making them an compact choice for all security needs. Our 10â?? office containers feature:
Tile floors
Doors (front or side)
Windows
Ventilation
Electrical
Restroom facilities
Framed, insulated and drywall
Air conditioning & Heat
The 10ft office is also called Guard shack, Monitoring Station, Portable Office
Our office containers are made from the same heavy duty steel frame found in our storage containers. These mobile office containers are designed for portable office use or as a construction office but may be moved from site to site and offer a secure portable onsite setup at remote locations.
No matter what style of container office you need, Miami Conex can help find a solution to meet your needs and budget! Call us at� 1-(800) 705-5043� for a quick quote or fill out our� quick quote form. We offer these for sale and for rent in selected areas. You can read testimonials from many of our satisfied customers.
Technical Details:Material Used:
IS 319 (Type 1)
BS 249 (Type 1)
Finishing and coating: These battery pins are well coated in both natural and nickel plated material.
All of our battery terminals are present in the specifications of IS 1367 and BS 3692. Besides, we also use variety of threads in the manufacturing of Battery Terminals. We also use the threads as per the customer's own design and specifications. These are as follows:
ISO Metric (MM Threads)
BA Threads
BSW Threads (Inches)
UNC, UNF Threads.
Finishing & Coating: We offer complete solutions in providing finishing and coating in Brass Auto Parts in natural form, nickel, tin, brass or any other coating as per customers' specifications.
Terminal Block Distribution Box Din Rail Terminal Block
Description
The terminal block distribution box plays an important role in branching the mian line.Generally it is used for distribution cabinet and various high voltage cabinet.An electric power distribution terminal block is a convenient, economical and safer way to distribute power from a single input source to multiple outputs.It is always used with the din rail,so it is also named din rail terminal block.
Product parameter
Item No. Current(A) Voltage(V) Conductors with starfix temules X-section(mm2) Hole NO.(pcs) Dimension(L*W*H)(mm)
CRUKK-80 85 690 IEC Input 6 to 16 x1 30*69*49
Output 2.5 to 6 x4
Output 2.5 to 16 x2
CRUKK-125 150 690 IEC Input 10 to 35 x1 29*77*46
Input 6 to 16 x4
Output 2.5 to 16 x6
CRUKK-160 200 690 IEC Input 10 to 35 x1 29*77*46
Input 6 to 16 x4
Output 2.5 to 16 x6
CRUKK-250 255 690 IEC Input 35 to 120 x1 47*96*50
Output 6 to 35 x2
Output 2.5 to 16 x5
Output 2.5 to 10 x4
CRUKK-400 335 690 IEC Input 95 to 185 x1 47*96*50
Output 6 to 35 x2
Output 2.5 to 16 x5
Output 2.5 to 10 x4
CRUKK-500 520 690 IEC Input 3x15.5x0.8 to 8x24 x1 49*96*50
Output 6 to 35 x2
Output 2.5 to 16 x5
Output 2.5 to 10 x4
Material of din rail terminal block
Terminal material: the terminal is made of excellent brass tinned,which is firm and durable,with strong corrosion resistance and good conductivity.
Shell material: the shell is made of Flame retardant nylon material,which is high strength and strong insulation performance.
Screw material: zinc stee,metric thread screw.
Features of Terminal Block Distribution Box
Made of flame-retardant shell, it is high temperature resistant and corrosion resistant.
The installation is simple and safety.The terminal block distribution box is easy and quick to install on the din rail.
The transparent cover can easily see if the cable is conneted reliably.
Cable fixing screw diametersï¼?95% fill ratio: excellent electrical.
Clip-on DIN rail or mount to panel with screws: easy fixing.keeping only one input, the blocks can be connected in parallel using a jumper wire.
DIN rail or panel mount
Wire ready: captive termination screws shipped backed out to save time on conductor installations Â
Catalog Download Here
Hot tage: Terminal block,Terminal box,din rail terminal block
