Find Verified Dc To Ac Pure Sine Wave 1000 Watt Power Inverter Suppliers, Manufacturers and Wholesalers

Products Features

1. Input & output fully insolated
2. High Surge: High surge current capability starts difficult loads such as TVs, camps, motors and other inductive loads
3. Soft start: Smooth start-up of the appliances.
4. Pure sine wave output waveform: Clean power for sensitive loads.
5. AC output identical to, and in some cases better than the power supplied by your utility
6. Cooling fan in the inverter is thermally activated and comes on when the inverters becomes warm, and turns off automatically after the inverter has cooled.
7. Low total harmonic distortion: Below 3%
8. Two LED indicators on the front panel shows the working and failure state.


Protection Function

1. Low voltage alarm & Shutdown
2. Over-voltage protection
3. Overload protection
4. Over-temperature protection
5. Short circuit protection
6. Soft start
7. Auto. Reset after being in protected
8. Grounding protection


Packaging details
1pcs/box, unit box size 43*23*14.8cm,N.W3.3kg, G.W3.9kg
4pcs/CTN, carton size 48.5*44.5*32.5cm, N.W15.0kg, G.W17.0kg

Input Voltage 12V / 24V DC optional
Output Voltage 115V / 230V AC optional
Portable power for AC products, AC outlets for connecting multiple loads
High surge capacity for products that require more power to start
High efficiency converts virtually all of the battery's power to AC
Mounting brackets for convenient installation
Heavy duty stud-connection mounting
RS232 communication port
WIFI/BMS Optional
Overload and over temperature shut down
Low voltage and over voltage alarm/cut off
Input reverse protection
Short circuit protection
PI15 series is a pure sine wave inverter, high frequency machine solution, the product is small size, the solution is reliable and stable, the main function is to invert the DC 12VDC battery or 24VDC battery to AC 230VAC or AC 115VAC output, mainly used for emergency use Electricity, car inverter,
outdoor electricity and other occasions.

Rated power : 5KW
Pure sine wave solar inverter
Output power factor 1
Built-in 80A MPPT solar charger
Built-in anti-dust kit for harsh environment
Support parallel operation up to 3 units (available for 3KW-5.5KW 48V)
WIFI remote monitoring (optional)
Compatible to generator

1. Soft start and external fuses
2. 1.5 times rated power for 10s, 2 times continue for 2s
120% 3. Power on-off switch
4. Two multiple controlled dc fans: temperature and load.
5. Protection: led indicator& audible alarm.
6. 12v/24v/48v dc input
7. Input voltage range: -15% ~ +25%
8. Output voltage regulation: 10%
9. Output waveform: pure sine wave(thd<3%)
10. Ce and rohs approved
11. Oem&odm available

Inner box and carton

1. Pure sine wave power inverters are featured as high reliability, and low failure rate,
2.Input & output fully insolated.
3.Soft start: Smooth startup of the appliances.
4.Pure sine wave output waveform: Clean power for sensitive loads.
5.Two LED indicators on the front panel shows the working and failure state.
6.Protection, inputlowvoltage protection, input overvoltage protection
7.Small and light: With the technology of CPU centralized control and SMD inside,
8.The product is very small and light.
9.Intelligent control of cooling fan: Using CPU to control the working status of the cooling fans
10.Saves the power and improves the working efficiency.
11.Low noise but high efficiency while working.

1500W Pure sine wave power inverter

Max continuous power : 1500w
Peak Load Power Rate:3000w
No load Current: less than 0.6A
Input DC voltage Range:DC10-15.5V / DC20-30V
Output Voltage Range:AC120/220V±5%
Output Frequency Range:50/60+/-3Hz
Max Outer Temperature:less than 65c
Max Power Efficiency:> 86%
High Voltage Cut Off Level:>DC15.5V / >DC30V
Low Voltage Alarm Level:DC10±0.3V / DC20±0.3V
Overload and Short-circuit Protection:yes
Input Voltage:less than DC10V / less than DC20V
THD :less than 5%
cooling : Fan

GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and
high security power services.

Safe and reliable
High quality li-ion cell for mobile use
Laser welding connection with high strength and low impedance
Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation
Damping pad design to improve the impact resistance of the system
IP54 safe and reliable operation in outdoor environment
Serially designed PCS and battery pack eliminates circulating current and improve system reliability.
Integrated BMS,DC, AC multi-layer protection, maximum safety performance design

Efficient and Convenient
Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion
Easy access to PV and diesel generator, intelligent muli-energy management.
Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring
Multi systems could be connected in parallel

Cost optimization
One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc.
Small size, light weight, less space and installation cost
Long cycle life, low failure rate, reduce operation and maintenance investment
Maximize green energy utilization.


Rated output power: 50KW
Rated energy: 75KWH

Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms

1000 watt inverter pure sine wave

A solid choice for your mid-range power needs, the REP1000, REP1000 pure sine wave inverter offers plenty of clean AC power for all your portable electronic equipment. The Go Power! REP1000 inverter is ideal for handling sensitive loads and for improving AC equipment performance in systems with 12 VDC input. A solid choice for powering electronic equipment like TVs, stereos, computers, or as a source of emergency backup power, the Go Power!? REP1000 is suitable for a range of applications.



1000 watt inverter pure sine wave

Ideal for powering office equipment, television, DVD, Video Games, battery chargers and other sensitive loads from your car, truck, boat, RV, or Solar System batteries! url:http://www.rogerele.com

Product Details:
Place of Origin: Zhejiang, China (Mainland)
Brand Name: Yom
Model Number: CZ-4000S
Output Power:4000W
Output Type: Single Phase
Machine Size: 42.5*21.7*15.3cm
Machine Weight: 10.25kg
Efficiency: 90%
Cooling Way: intelligent Cooling Fan
Certificates: CE & RoHS & ISO9001
On/Off Grid: off grid
Waveform: Pure sine wave
Working Temperature: -30C~+50C
AC Regulation: THDC3%

Protection:
.Buzzer alarm
.Soft start
.Reverse polarity
.Grounding protection
.Over-load protection
.Low-voltage protection
.Over-voltage protection
.Short-circuit protection
.Over-temperature protection
.Auto reset after being in protection


1pcs/box, unit box size 59*33*28cm,N.W 10.25kg, G.W12.4kg

Dc to ac modified sine wave power inverter

3. Usb:5v, 500ma
4. Modified sine wave output
5. High reliability and high efficiency
6. High load ability
7. Temperature and load controlled cooling fan
8. Protection: overload, short circuit, reverse polarity,
Over/under input voltage, over temperature
9. Led indicator light indicate inverter, fault mode
10. Ce and rohs approved

Inner box and carton

SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply.
Technical Features:
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance.
2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection.
3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance.
4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control.
5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load.
8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock.
9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy.
10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.

2000w DC pure Sine wave power inverter.

-

Delivering clean, stable power for sensitive electronics, Apex Pure Sine Inverters ensure maximum efficiency, quiet operation, and reliable performance. Ideal for residential, commercial, and off-grid solar systems, they offer smooth output and long-lasting durability.

Np Power Smart Inverter

Technical Specifications
Np Power 6.2 kW Off-Grid Smart Inverter
Nominal Output Power 6200 Watt
Output Waveform Pure Sine Wave
Output Voltage 230V
Output Frequency 50Hz-60Hz
Efficiency 94%
Max. Charge Current 120A
Max. PV Charge Current 100A
Max. AC Charge Current 60A
Dc Input Voltage 24V DC
Rated Power 6500 Watt
Max. PV Input 500V DC
Working Temperature -15 -60 Degrees
Dimensions 358*295*105 - 8.7 KG
2 Year Warranty
Single Phase

Technical Specifications
Np Power 3.5 kW Off-Grid Smart Inverter
Nominal Output Power 3500 Watt
Output Voltage 230V
Output Frequency 50Hz-60Hz
Efficiency 94%
Max. Charge Current 100A
Max. PV Charge Current 100A
Max. AC Charge Current 60A
Dc Input Voltage 24V DC
Rated Power 4000 Watt
Max. PV Input 500V DC
Working Temperature -10-55 Degrees
Dimensions 330*278*98 4.4 KG
2 Year Warranty

Apex Smart Inverter

Main Technical Features
Technical Detail Value
Product Name Apex Eco 11 kW Smart Inverter
Output Power 11,000 Watt (11 kW)
Working Voltage 48V DC
MPPT Solar Charge Current 120A
PV Input Voltage 120V - 500V
AC Output 220V -Pure Sine Wave
Battery Compatibility Gel, AGM, Lithium (LiFePO4)
No Grid Connection (Off-Grid Only)
Display LCD digital display
Cooling Automatic fan control
Protection Systems Overload, short circuit, over temperature, low voltage etc.
Waranty 2 years
Single Phase

Apex is an Electrozirve brand

Apex Eco 6.2 kW Hybrid Smart Inverter

Technical Specifications
Feature Description
Maximum Power 6.2 kW (6200 Watt)
System Voltage 48V DC
MPPT Solar Charge Controller 120A (Wide Input Voltage Range)
Waveform Pure Sine Wave
AC Output Voltage 220-230V (�±%2)
Input Voltage (PV) 120V - 500V DC
Smart Modes Solar Priority / Battery Priority / Grid Priority
Sales to Grid Yes (On-Grid Hybrid Mode)
Display Large LCD screen + detailed menu
Protection Features Overload, short circuit, high temperature, low battery etc.

Apex is a brand of Electrozirve

We sell brand new airconditioner.

Converters - ADC Octal CH 12B 100MSPS Hi-SNR & Lo-Pwr ADC A 595-ADS5295PFP

10000 Watt AC to AC Hybrid Load sine wave converter
 
Technical Features:
* Using the fifth efficient IPM power module from Mitsubishi with stable performance and high efficiency. Its service life could reach 15-20 years.
 
* Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more.
*Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control.
* Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features.
*Adopted low frequency isolated transformer, high conversion efficiency and stable performance
* Output AC Power is suitable for all types of home appliances, electric tools, electric motors etc.
* Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices
* Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated.
* Pure sine wave output, has higher efficiency and higher capability of driving load.
*Output perfect protection function, with output over-voltage, overload, short circuit, over temperature, self-diagnosis protection and other protection
* Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
* The input voltage, output voltage, frequency and phase can be custom made.
 
We can make products according to your requirements.
 

Technical Data


Model
BZT-10KW

Isolation
Low Frequency Transformer

AC Input 
Input rated voltage(VAC)
Single phase 220V

Input rated current(A)
45.4A

Input voltage range
110/120/220/230/240Vac optional

AC Output
Rated AC output power
10KW

AC output waveform
Pure sine wave

Phases
Three phase, 4 wires

Output rated voltage
380VAC ±3%

Output rated current(A)
15.1A (per phase)

Output voltage range
380/400/415/440/480Vac optional

Output Frequency
50Hz/60Hz±0.05Hz

Power Factor(PF)
0.9

Overload Ability
150%, 10s

Efficiency  
>93%

Waveform distortion rate (THD)