Tungsten carbide is one of the best materials with its highest hardness,wear resistance material in the industrial except diamond.
HF WC is a nickel cored flexible rod coated with mainly spherical fused/cast tungsten carbide and Ni-Cr-B-Si-Matrix. The hard facing is highly resistance to acids,bases,lye,and other corrosive media and excessive wear conditions.It can be covered on the carbon steel,low carbon steel,low alloy steel,stainless steel,cast iron and ductile iron surfacing, suitable for oil drilling tools (such as PDC drill,Centralizers),building machinery (such as the blade of brick and concrete production),mining geological tools,agriculture,food and chemical industry machinery.It is mainly used for surfacing and repairing for the strong wear and tear corrosion part,can significantly reduce tool wear and tear,improve work efficiency.The rod has a low mlting range of between 950-1060 �?? and feature a self fluxing characteristic producing a smooth,clean welded surface.
Application:
Hard facing on ferritic and austenitic steels(steel castings),over-laying mix ed blades,screws and conveyors in chemical,dye and food industry.
Specially recommended for stabilizer blade in the petroleum industry.
HF WC-S can hold the higher load wear,
higher resistance to high stress and high stress wear.HF
WC-S particles mainly is spherical casting WC particles
and irregular casting WC particles,sepherical cast tungsten
carbide particles have good toughness and strength binding
with the metal,supplemented by a certain amount of irregular
casting carbonization,so that the surfacing layer has a better
wear resistance and impact resistance.The actual thickness of
surfacing electrode, different diameters can be choosed accor-
ding to the tools demand,generally covered 1 to 3 layers.
Application:
Hard facing on opetroleum industry tools(PDC,stabilizer blade),ferritic and austenitic steels(steel castings),over-laying mixed blades,screws and conveyors in chemical,shredding machine,mining scraper, mud pump blades, drill pipe joints, centralizer, mining cut Teeth, cone and so on.
HF WC-C is suitable for low stress wear conditions,with a
higher resistance to low stress wear.HF WC-C mainly
filled with irregular casted WC particles. The hard particle
size designed optimization,which blend different particle
size very well.
In the process of welding hard particles are closely,so improve
the wear resistance and impact resistance of the surfacing layer.
Application:
Hard facing on opetroleum industry tools(PDC,stabilizer blade),shredding machine,Turning machine,drilling rock machine,mining scraper, surfacing and repaired mud pump blades, drill pipe joints, centralizer and so on.
Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.
According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.
According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
Application: It is a kind of basic material for organic synthesis, and can produce acetylene gas for cutting and welding, also be material for calcium cyanamide.
Appearance: Grey, black solid, purple when its purity is more than 90%.
Granule:4-25mm / 15-25mm / 25-50mm / 50-80mm /25-80/ 80-120mm
Package: Net in 100kg or 50kg new iron drums with nitrogen.
Specification: GB10665-2004
Specification Superfine Grade First Grade Second Grade
Gas yield(L/kg)L/kg 305 295-305 285-295
PH3 content in acetylene (PH3%) 0.06 0.08 0.08
H2S content in acetylene (H2S%) 0.1 0.1 0.1
None welded width can reach 1.8-4.2 meters and welded width can reach 30 meters. Coating on one side or both sides. According to customers requirements, it is available to add UV inhibitors or fire retardant or others. Laminating all around and using pp rope to strengthen, with Al-eyelets or black corner
Features: wc and w2c eutectic structures. Because of its high melting point, high hardness, high wears resistance, it features in high temperature resistance, wear resistance and impact resistance.
Particle size range: 38um-5000um.
Customized:
We able to adjust the ingredient, particle size and powder blending ratio, etc as per the specification need of customers equipment in order to obtain the best wear resistance result.
Phildal tungsten co., limited is becoming a significant tungsten material supplier and exporter.
Character: wc and w2c eutectic structure. Because of its high melting point, high hardness, high wear ressistance, it
Applications: cast tungsten carbide is applied by oxygen-acetylene flame, arc, spray, braze and wet welding on wear places. It is also adhered firmly to the surface of wear work pieces with epoxy resin and inorganic additives at lower temperature and impact. The parts of piled-up cast tungsten carbide coating can stand high temperature and impact. It characterized by long tool life, easy mainternance, low cost and improved productivity.
Phildal tungsten co., limited is becoming a significant tungsten material supplier and exporter.
Character: the microstructure of spherical cast tungsten carbide is homogeneous, dense and featherlike structure, and spherical cast tungsten carbide has stable chemical properties, good processing performance high hardness, good
Applications: widely used for exploiting drill bits, pdc drill toos, melting and penetrating spray coating and piled-up welding on wear surface.
430 Annealed Stainless Steel Strip
Extra Bright Annealed Soft Temper 430 Stainless Strip Steel is the most popular of all the straight chrome stainless steels Its principal use is for decorative purposes Because of its excellent heat and corrosion resistant properties its ductility and because it costs less than the chromenickel grades this Type 430 Stainless Steel Strip is used in countless applications These uses are primarily for stainless and decorative purposes including household appliances metal molding metal trim cabinet hardware hinges drawn and formed parts and stampings
Type 430 Ferritic Stainless Steel Strip Characterisings
Corrosion and heat resistant
Ductility at about 75 of low carbon strip
Similar to chromium grades with stretcher strains
Roping can result from excessive stretching
Able to weld for nonrigorous service
Magnetic in all conditions
Tensile strength annealed condition minimum of 65000 PSI yield of 30000 PSI elongation at 22
Supplier From
Seoul,
Gyeonggi,
South Korea (Republic Of Korea)
We are supplier of all kinds of seal rings for mechanical seals as following;
mechanical seals, tungsten carbide rings, silicon carbide rings, ceramic rings
carbon graphite rings, rubber carbide rings.
1.Polyethylene glycol series products can be used in pharmaceuticals. Polyethylene glycol with low relative molecular weight can be used as solvent, co-solvent, O/W emulsifier and stabilizer, used to make cement suspensions, emulsions, injections, etc., and also used as water-soluble ointment matrix and suppository matrix, solid waxy polyethylene glycol with high relative molecular weight is often used to increase the viscosity and solidification of low molecular weight liquid PEG, as well as compensate other drugs; For drugs that are not easily soluble in water, this product can be used as a carrier of solid dispersant to achieve the purpose of solid dispersion, PEG4000, PEG6000 is a good coating material, hydrophilic polishing materials, film and capsule materials, plasticizers, lubricants and drop pill matrix, for the preparation of tablets, pills, capsules, microencapsulations, etc.
2.PEG4000 and PEG6000 are used as excipients in the pharmaceutical industry for the preparation of suppositories and ointments; It is used as a finishing agent in the paper industry to increase the gloss and smoothness of paper; In the rubber industry, as an additive, it increases the lubricity and plasticity of rubber products, reduces power consumption during processing, and prolongs the service life of rubber products.
3.Polyethylene glycol series products can be used as raw materials for ester surfactants.
4.PEG-200 can be used as a medium for organic synthesis and a heat carrier with high requirements, and is used as a moisturizer, inorganic salt solubilizer, and viscosity adjuster in the daily chemical industry; Used as softener and antistatic agent in the textile industry; It is used as a wetting agent in the paper and pesticide industry.
5.PEG-400, PEG-600, PEG-800 are used as substrates for medicine and cosmetics, lubricants and wetting agents for rubber industry and textile industry. PEG-600 is added to the electrolyte in the metal industry to enhance the grinding effect and enhance the luster of the metal surface.
6.PEG-1000, PEG-1500 is used as a matrix or lubricant and softener in the pharmaceutical, textile and cosmetic industries; Used as a dispersant in the coating industry; Improve the water dispersibility and flexibility of the resin, the dosage is 20~30%; The ink can improve the solubility of the dye and reduce its volatility, which is especially suitable in wax paper and ink pad ink, and can also be used in ballpoint pen ink to adjust ink viscosity; In the rubber industry as a dispersant, promote vulcanization, used as a dispersant for carbon black filler.
7.PEG-2000, PEG-3000 are used as metal processing casting agents, metal wire drawing, stamping or forming lubricants and cutting fluids, grinding cooling lubricants and polishes, welding agents, etc.; It is used as a lubricant in the paper industry, etc., and is also used as a hot melt adhesive to increase rapid rewetting capacity.
Manufacturer insulating light weight insulating refractory mortar castable is a kind of unshaped refractory made of granular and powdery material, in which add a certain amount of binder and water together. It has high mobility, is suitable for casting construction, and can be hardened without heating. Refractory castables consist of refractory aggregates, powders, binders, admixtures, water or other liquid materials. Generally in the use site, it is molded by pour, vibration or tamping method, and can be used as preforms. Refractory castables are mainly used in the metallurgical industry furnace, also in the petroleum, chemical, building materials, power and machinery industry furnace and thermal equipment.
We could offer you the best refractory castable as following:
1.High alumina castable.
2.low cement refractory castable.
3.corundum castable.
4.Self flowing refractory castable.
5.Corundum mullite castable.
6.Silicon carbide castable.
7.Zirconia Refractory Castable.
8.Lightweight insulation Refractory castable
Features and Advantages of refractory castable:
1. High refractoriness, High refractoriness under load.
2. High density, low porosity.
3. Good slag resistance and corrosion resistance.
4. High strength and wear resistance.
5. Good resistance to flake performance.
6. Good thermal shock stability.
7. Scouring resistance
8. Good hot strength.
GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products.
ISRI-CODES:
(27) Rail, steel No.1 â?? Standard section T rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail.
(28a) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 18 inches long and under.
(28b) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 2 feet long and under.
(28c) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 3 feet long and under.
(29) Rail, steel No.3 â?? Standard section T, girder and/or guard rails, to be free from frog and switch rails not cut apart and contain no manganese, casts, welds or attachments of any kind except angle bars. Free from concrete, dirt and foreign material of any kind.
We are trading in the finest quality Metal Scrap/ Aluminum Scrap, which are recycled for producing pure copper products and equipment.
R50- R65 - IRSI CODES;
The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65
Chemical Composition Used Rails;
C: 0, 54 - 0,82
Si: 0,18-0,40
Mn: 0, 60-1, 05
S: 0.04 max
P: 0,035 max
As.: 0, 01 max of Mass share
Norms: R-50 GOST7173-75 and R-65 GOST-8165-75
The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m)
Used Rail ISRI 27-29 ISRI-CODES;
(27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail.
(28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under.
(28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under.
(28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under.
(29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind.
The rails can be cut to the length the buyer wants
What are details of tungsten carbide ring ?
Name Tungsten Carbide,Tungsten Carbide Ring,Tungsten
Features
1. High hardness and wear-resistance
2.Good anti-corrosion and heat-resisting
3.High strength and good toughness
4.The hardness and the wear-resistance will not change in 500°C.Even in 1000 °C it still has a high hardness.
5.It is a cemented carbid
Representative products
1. Tungsten steel rod
2. Tungsten steel strip
3. Tungsten steel discs
4. Tungsten steel sheet
Sizes According to your requirments
Packing Normal packing or according t customer's requests.
Price The price will change according to the weight of the steel you need.
We are supplier of Tungsten Carbide Items in sintered and finished condition. We can supply with various wear part grades and shapes as per standard and non-standard specifications. Also Special items can manufactured based on customer's requirements.
Our Products details:
Tc Wire/tube/bar drawing pellets.
Tc Heading Pellets for cold and hot forging.
Tc Valve Seat, Orifice plugs etc.
Tc Washers, Swirl Chambers etc.
Tc Sugar Tips.
Tc Bushes for jigs and gauges.
Tc Roller and Pulleys
Tc Burnishing rollers
Tc Nozzles for Sand blasting.
Tc Flats & other special wear parts.
Tc Bowl, ring, cups, disc etc.
Please send us your requirements with dimensional drawing or samples.
