A brick is a type of construction material used to build walls, pavements and other elements in masonry construction. Block is a similar term referring to a rectangular building unit composed of clay or concrete, but is usually larger than a brick
Magnesite brick, the content of magnesium oxide is more than 90%,periclaseas the main crystal phase of basical
refractory brick.
Magnesite with high temperature refractorness, high begining temperature of softing under loading,good alkali
resistance of slag.
According to differnence of the production technology and raw materials,it is names general magnesite brick
and fused magnesite brick.
Magnesite brick is mainly used for open hearth furnace,bottom and wall of the EAF,conventer, high temperature
tunnel kiln,cement kiln,lime kiln, glass furnace regenerator.
Any interests, get back to me at whatsapp008618848875625
Raw Material
Grass tree wood,beech wood,pine wood,rubber wood,etc
Package
1)Normally our package is as below: a.color box.
b. each set into an opp bag,
c.Heat shrinkage package ;
2)If you need other package is also OK,
please contact us.
Feature
Logo
1)can buy stock goods with the logo in the picture;
2)can custom own logo.
AZS brick use high purity zircon, alumina and silica as its raw material.
Our fused AZS blocks mainly inclue model AZS-33#, AZS-36#, and AZS-41#. the different models applicated in different parts of furnaces.
AZS brick 33#, a normal refractory material, with the features of very good melting glass resisting, which seldom produces stone or other faults, and has little possibility to produce bubbles, widely used in glass Industrial furnace.
AZS brick 36# has more free baddeleyite crystals in chain structure and less vitreous phase, which further improves the corrosion resistibility and reduces the potential defects in glass, so it is recommended to be used in sections where glass flow is faster and temperature is higher, such as melter sidewall, paving, doghouse, etc.
AZS brick 41# has the most free baddeleyite crystals among the fused cast AZS families, which are evenly distgributed within the block. Its corrosion resistibility is the best and thus it is usually recommended to be used in the most demanding positions to balance the furnace life.
53858 Bricks And Blocks Suppliers
Short on time? Let Bricks And Blocks sellers contact you.
Cupola Fire Bricks are special type of brick which are form of Refractory ceramic material. It is used for inner surface lining of Boiler, furnace, kiln, fireplaces & fireboxes.
Quality:
We offer various quality bricks are IS-6, IS-8, PI - 30% to 70% Alumina offering high temperature resistance of 1100 C to 1700 C
Sizes of Cupola Bricks:
Length 9 Inch & 11 Inch
Dia (Inch) 9D, 12D, 15D, 18D, 21D, 24D, 27D up to 56D
Insulation Bricks are used for hot face & back up insulation lining of Boiler, Reheating furnace, Blast furnace, reactor chamber, high temperature furnace etc.
Insulation Bricks are providing energy efficiency by minimising heat loss. They have feature of low density, high purity, low thermal conductivity, excellent thermal shock resistance.
Types of Insulation Bricks:
Cold Face Insulation Bricks
Hot Face Insulation Bricks
HFK Insulation Bricks
Porosint Insulation Bricks
Hanger & shoulder Fire bricks are special type of brick which are form of Refractory ceramic material. It is used for Roof lining of Boiler, furnace, kiln, fireplaces & fireboxes.
Hanger & Shoulder Brick are used for Reheating furnace roof. There are three qualities of Hanger & shoulder brick as per their specification
40% Alumina Hanger & Shoulder Brick
50% Alumina Brick Hanger & Shoulder Brick
70% Alumina brick Hanger & Shoulder Brick
Acid Resistance bricks & Tile are special form of masonry bricks which are chemically resistant and thermally durable. These are used for masonry construction and flooring which is prone to chemical attack.
These products are classified as per the different standard.
Class - I
Class - II
Sizes of Bricks:
230 x 115 x 75 mm, 230 x 115 x 65 mm, 230 x 115 x 38 mm, 230 x 115 x 25 mm
Sizes of Tile:
230 x 115 x 20 mm / 15 mm / 12 mm
200 x 100 x 20 mm / 15 mm/ 12 mm
300 x 300 x 15 mm / 12mm
Model KBQ4-32
The molding cycle 25-32 seconds/time
Every time the molding blocks Standard brick and block;Block 4 block;Brick road 12 (with secondary cloth)
The installed capacity 13.5KW
The weight 3.5T
Dimension 4000 × 3500 × 2300mm
2. Feature
1. It adopts double levels of cloth, combines the vibration and pressing, and is with the double control on height and density. Thus, the products are firm, even and beautiful. In addition, the products would be also with the advantages of small occupying area, easy installation, convenient operation, rapid forming speed, low malfunction rate, convenient maintenance, etc. Especially, it's with most obvious merits of low investment and rapid effect.
2. For KBQ4-32 brick forming machine, by replacing the related mould, it could also be used to produce the burning-avoid brick, the multi-hole brick, the hollow brick, the colorful pavement brick, the lawn brick, the flower-wall brick, the slope protection, the road-edge brick and other different kinds of concrete products. The products would be widely used in the pavement, garden, hydraulic engineering projects, plaza, residential districts and so on..
3. It's available to add quantities of fly ash ,slag, cinder and other industrial waste into the raw material.IN addition, it's also possible to supply the half-automatic or automatic product line according to the user's requirements.
Introductionï¼?
This machine realizes one machine multi-purpose, changes the mold to be able to produce standard brick, the bread brick humanoid footpath brick, the tree pit brick and so on dozens of products, fully achieves the user's satisfaction.
The cement pad machine produced by our company is able to stack and save a lot of supporting plates because of the reasonable pressure and vibration matching, the products are beautiful and the strength is good.
At Gremlog Trading DMCC, we're proud to offer a sustainable alternative for spent refractory bricks. Instead of discarding them, we recycle these bricks into valuable raw materials with various applications. Our recycled refractory bricks can be used in powder coating, road-base aggregate, metallurgical processes, as slag conditioners, and even as feedstock for cement production. This not only reduces waste but also provides cost-effective options for industries. Moreover, these recycled materials can be directly reused in the manufacturing of new refractory bricks, closing the loop on sustainability. Join us in our mission to promote environmental responsibility while meeting your industrial needs. Contact Gremlog Trading DMCC today to learn more about our Recycled Spent Refractory Bricks.
SK 34 Fire bricks are special type of brick which are form of Refractory ceramic material. It is used for inner surface lining of Boiler, furnace, kiln, fireplaces & fireboxes.
Quality of Bricks:
We offer various quality bricks are 35 to 40% Alumina offering high temperature resistance.
Standard Sizes (MM):
230 x 115 x 75 MM
230 x 115 x 65 MM
SK 36 Fire bricks are special type of brick which are form of Refractory ceramic material. It is used for inner surface lining of Boiler, furnace, kiln, fireplaces & fireboxes.
Quality of Bricks:
We offer various quality bricks are 50 to 55% Alumina offering high temperature resistance.
Standard Sizes (MM):
230 x 115 x 75 MM
230 x 115 x 65 MM
Fire clay & High Alumina bricks are special type of brick which are form of Refractory ceramic material. It is used for inner surface lining of Boiler, furnace, kiln, fireplaces & fireboxes.
Quality of Bricks:
We offer various quality bricks are IS-6, IS-8, PI - 30% to 90% Alumina offering high temperature resistance of 1100 C to 1700 C.
Mould/Brick Mould/Block Mould/Mold for Block Machine
Model NO.: Customized
Material: High Carbon Chromium Tool Steel
Technics: Forming Die
Manufacturing Technology: Computer Technology
Mold Cavity Technology: CNC Milling
Parts Detection Method: Geometric Detection
Mould Frame: 55# Manganese Steel
Mould Frame Structure: Inlaid Structure
Mould Surface Strength: HRC61
Trademark: QZ
Specification: CE, SGS
HS Code: 8474809090
Application: Concrete Block Making
Processing Method: Compression Mould
Process Combination: Composite Mould
Driving Motor Type: Hybrid
Milling Speed: High Speed
Tamper Head: 16# Manganese Steel
Mould Core Strength: HRC33
Life Span: 100000 to 120000 Times
Transport Package: Standard Seaworthy Packing
Origin: Xinxiang, Henan, China
Product Description
Mould frame are made of 55# Manganese steel, and tamper head is made of 16# manganese steel.
Mould frame is made with inlaid structure, and mould are processed via the procedures of carburizing, nitriding and quenching which guarantee the strength of mould core could be HRC33 and mould surface could be HRC61
Refractory bricks are indispensable in various industries for lining high-temperature equipment such as furnaces, kilns, and reactors. The utilization of recycled refractory bricks contributes to environmental sustainability by reducing waste and minimizing the demand for virgin resources. Moreover, recycling materials can lead to cost savings compared to sourcing and processing raw materials from scratch, making recycled refractory bricks a cost-effective option for industries. Despite being made from recycled materials, these bricks offer comparable performance to conventional refractory products, providing excellent thermal insulation and resistance to high temperatures. Additionally, recycled refractory bricks can be customized to meet specific requirements, allowing for flexibility based on the application and performance needs of different industries.
Recycled refractory bricks find applications in various industries, including steel manufacturing, cement production, foundries, and glass manufacturing. They offer a sustainable solution for lining high-temperature equipment while maintaining performance and durability.
At Gremlog Trading DMCC, we're proud to offer a sustainable alternative for spent refractory bricks. Instead of discarding them, we recycle these bricks into valuable raw materials with various applications.Our recycled refractory bricks can be used in powder coating, road-base aggregate, metallurgical processes, as slag conditioners, and even as feedstock for cement production. This not only reduces waste but also provides cost-effective options for industries.Moreover, these recycled materials can be directly reused in the manufacturing of new refractory bricks, closing the loop on sustainability.Join us in our mission to promote environmental responsibility while meeting your industrial needs. Contact Gremlog Trading DMCC today to learn more about our Recycled Spent Refractory Bricks.
53858 Bricks And Blocks Suppliers
Short on time? Let Bricks And Blocks sellers contact you.
