Galvanized bolts are bolts that have undergone a galvanization process, which involves coating the bolts with a layer of zinc to provide protection against corrosion. The galvanization process creates a protective barrier that helps prevent the bolt from rusting when exposed to moisture and other corrosive elements.
Apply to
Marine : Fishing boat, Leisure boat, Cruise, Ferry
Industrial : Water Pump, Sand Pump
Standard supply
Mechanical control valve
Cable bracket/clamp parts.
Oil cooler/cover
Companion flange/Reamer bolts
Bell housing (Selection)
CENTA flexible coupling
Features
Marine reduction gearbox with hydraulic clutch.
Suitable for twin engines with the same reduction ratio as forward/reverse.
Design and strict quality management according to ISO9001 standards.
Use of seawater-resistant castings.
Quiet operation with precise gearing.
Tapered roller bearing application considering maximum thrust.
Compact design, minimal appearance in its class.
Permanently available oil filter (metal) applied.
GO HOME (emergency bolt application) function.
Options
Electric control valve(12V, 24V optional)
Mechanical trolling valve
Mounting brackets (Flat type, Customized)
Class
Bolts :
Hex Head Bolts , Hexagon Head Screw , Mushroom Head Squre Neck Bolts , T- Head Bolts , Wing Screw , Eye Bolt , Lifting Eye Bolt
Screw :
Pan Head Slotted Screws , Cheese Head Slotted Screws , Countersunk Head Slotted Screws , Countersunk Raised Head Slotted Screws , Pan Phillipse Head Screw , Countersunk Phillipse Raised Head Screws , Slotted Cheese Trim Head Machine Screws , Socket Head Allen Cap Screws , Allen Countersunk Socket Head Cap Screws , Socket Head Shoulder Screws , Socket Head Cap Screw Low Head , Hexagon Socket Set Screw With Flat Point , Hexagon Socket Set Scews With Cone Point , Hexagon Socket Set Screw With Dog Point , Hexagon Socket Set Screws With Dog Point , Hexagon Socket Set Screws With Cup Point , Imprial Socket Cap Screws.
Hex Bolts
High Strength Friction Grip Bolts
Flange Bolts
Cup Head Bolts
Crash Barrier
Guard Rail Bolts
Socket Head Cap Screws
Wheel Bolts
Counter Sunk
Dome Head
Machine Screw
as per customers requirement
Cold Forging (M4 to M30)
Hot Forging (M10 to M80)
GRADE : 4.6, 4.8, 5.6, BSW, BSF, UNC, UNF (Gr2) Precision, 6.6, 6.8, 6.9, 8.8, 10.9, Gr 2, Gr 5, Gr 8, B7, Gr. R, S, T, U, V, A325, A490
FINISH:
Black, Self
Zinc Plated
Rilsan Blue
Hot Dip Galvanized
Bolts , Nuts U-bolts, Hexagon, Flange, Allen And Other Types Of Bolts, Rods, Fittings And Road Safety Fasteners, Anti Theft Fasteners, Stud Bolts And Special Fasteners (from M6 to M64) for industries of Automotive, Electric Power Transmission, Road Safety, Telecommunication, Lighting, Solar Energy, Construction Building, Steel Constriction, Heavy Machineries, Agricultural machineries, Wind tribune , Furniture and Lumber industry. Also can give service for special products as our customers requirements too.
RS Export Import is a leading Exporter and Supplier of Bolts like as Hex bolts, Carriage bolts, Anchor bolts ,Square Bolts, Round Bolt, Arbor bolts, Elevator bolts, Hanger bolts, U-bolts, J bolts, Eyebolts, T Bolts, L Bolts, High Tensile Hex Bolts etc. in India.
An Bolts, Hex Bolts, Fastener and Bolts, Hex Cap Screws, Spring Center bolts, Hex Socket Cap Screws, Carriage bolts, solid rivets, square head set screws, truss head track bolts, U Bolts, Fin Neck Bolts, shoulder bolts, coil thread bolts, Structure Liner Bolts, Benjo Bolts, Hub Boltsfetter drive screws, wheel bolts, t-head bolts, Flange Bolts, eye bolts, shackle bolts, track bolts, wheel bolts, hex cap screws,
High-Strength Steel Bolts as per ASTM A 490M, Class 10.9
Hex Bolts6mm To 100mm (1/4" to 4")
Heavy Hex Bolts6mm To 100mm (1/4" to 4")
Hex cap Screws6mm To 100mm (1/4" to 4")
Heavy Hex Screws6mm To 100mm (1/4" to 4")
Heavy Hex Structural Bolts6mm To 100mm (1/4" to 4")
Square BoltsM16 TO M42 (5/8" to 1.5/8")
Round Head Square NeckM12 TO M42 (5/8" to 1.5/8")
Round Head Short Square NeckM6 TO M64 (5/8" to 1.5/8")
Hex and Spline Socket Head CapM6 to M64 (1/4" to 2.5")
Round Head Fin NeckM6 to M64 (1/4" to 2.5")
Slotted Counter SunkM6 to M64 (1/4" to 2.5")
Bolts/Screws as per customersM6 to M64 (1/4" to 2.5")
Drawings / SpecificationsWe can manufacture any type of typical Fasteners as per your drawing and specifications
FINISH : The above products are available in finish like Phosphate, Black Oxide, Galvanised, Hot Dip Galvanised, Cadmium Plating. Teflon (PTFE), Powder & many more as per Customer Requirements.
We can also supply fasteners according to customers drawings and specifications.
Standard ANSI/ASME, JIS, EN, DIN, BS,GB, SH, HG, IFI, ISO and etc.
Size :Standard & non-standard, support customized
Material Carbon Steel, Stainless Steel and etc.
Grade SAE J429 Gr.2, 5,8; ASTM A307Gr.A, Class 4.8, 5.8, 6.8, 8.8, 10.9, 12.9 and etc.
Thread UNC,UNF,BSW
Finish Plain,ZincPlated(Clear/Blue/Yellow/Black),Black,HDPE,Fluorocarbon Coating,
Packing Bulk in cartons on wood pallet or according to customer special demand.
Application Structural Steel; Metal Buliding; Oil&Gas; Tower&Pole; Wind Energy; Mechanical Machine; Automobile:
Supply Ability:About 100 tons per month
MOQ Not limited
Trade Term FOB/CIF/CFR/CNF/EXW/DDU/DDP
Payment T/T, L/C ,D/P , Western Union ,etc
