Features:
Read dtcs.
Clear dtcs.
View live datastream.
View freeze data.
Reading i/m readiness status data.
Restrieve vehicle information.
Compatible with all 1996 and newer vehicles(obdii & can).
Supported protocols: j1859-41.6, j1850-10.4, iso9141, kwp2000(iso 14230), and can(control area network iso 11898).
Support multi language.
One-year limited warranty.
Introduction:
1.Compatible with all 1996 and newer vehicles (obd ii & can) .
2.Supports multiple code requests: generic, manufacturer specific and pending codes.
3.Displays dtc definition on the tft color screen. Reading/erasing dtc and i/m readiness hot keys make it easy to use this tool right out of the package. Provides quick access to emissions readiness status. Dtc information and erase function.
4.Features the unique patented one-click readiness key for quick state emissions readiness check and drive cycle verification.
5.Bright color coded leds and built-in speaker indicate emissions monitor status.
6.Retrieves generic (p0, p2, p3, and u0), manufacturer specific (p1, p3, and u1) codes, and pending codes.
7.Displays monitor and i/m readiness status (emissions).
8.Easily determines the cause of the malfunction indicator light ( mil). Clear codes, turns off malfunction indicator light (mil) and reset monitors.
9.Reads freeze frame data which shows engine conditions such as fuel trim, engine coolant temp, etc., at the time the malfunction indicator lamp (mil) was set
10.Reads live pcm datastream.
11.Retrieves vehicle information (vin, cid and cvn).
12.Displays live o2 sensor test data.
13.Enhanced obdii mode 6 functions.
14.Automatic vin acquisition and decoding makes it much easier to read manufacturer specific codes and enhanced mode 6 data.
15.Troubleshooter code tips guide technicians to the root cause of a trouble code faster, saving diagnosis and repair time.
16.Multi-language menu options and dtc definitions ¡§cenglish, spanish, french, german, portuguese and more.
17.Internet updateable and upgradeable let you stay current with the latest technology.
18.Prints data via pc
1GB, 8GB EMMC
7 inch Capacitive Touch Screen Display
80mm built-in Thermal & Lablel Printer
Dual SIM Cards, Support Micro TF Card
Including NFC and IC card (optional)
Charging Dock Stand
Black, White and Red Colors
Can be used as Standalone Cash Register
Built-in 80mm Thermal and Label printer make it unique from others. Possess low power consumption.
Key Feature
* Quick & accurate fever detection
* Face mask Detection
* High accuracy on facial recognition
* Alert / Notification function
* Enhanced quality and design
* No installation work required (Simply set it up on the floor)
* 8 inch tablet used
Key Feature
* Quick & accurate fever detection
* Face mask Detection
* High accuracy on facial recognition
* Alert / Notification function
* Enhanced quality and design
* No installation work required (Simply set it up on table top)
* 8 inch tablet used
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills.
It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color.
Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating.
From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list
In particular the mill scale can be classified as follows:
Einecs (european commission no.): 266-007-8
Waste code: 10 02 10
Basel code: b 12 30
Hs code: 2619.00
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
Compatible with(cyue-tech featured):
Windows xp, vista, windows7 32-bit & 64-bit, osx operating systems.
Pc with easy obd-ii, scanmaster elm, wobd crazy and so on.
Handheld equipments (suggested android smart phones) with os, android, symbian, windows mb etc.
The MS4100 new generation barcode scaner , with fixed mount and compact design, its suitable for all kinds of Kiosk, ATM, ticket terminal, medical device , access control machine for embedded use.
With infrared sensor, this barcode scaner can accurately detect and read the barcode, and also save power at the same time, only when a barcode appear, the illumination light will be on and the scanner begins to work, this way the scanner can always keep cool, this also makes the scanner more durable and reliable.
The barcode scaner readable most 1D barcode and 2D barcode such as QR code, PDF417 code, Data Matrix, Aztec Code...and also with high performance for reading codes from smart phone screen.
mporter & Supplier of Nickel Sludge. Our product range also comprises of Copper Ore, Tin Ore, TIn Sludge, Cobalt etc. The raw materials are available in powder form, to the exact chemical and physical (Mesh Size) specifications of the welding electrodes industry.
Nickel Sludge
Product Code : Nickel
Nickel Percentage : 15% to 20%
Payment Terms : T/T (Bank Transfer), Western Union, Other
Minimum Order Quantity : 25 Metric Ton
Production Capacity : 100mt
Delivery Time : immidiate
Packaging Details : as per costumer requirement
We are engaged in wide range of Copper Ore Lumps. We are a renowned manufacturer and exporter of an impeccable Copper Ore Lumps, Known for their high efficiency and durability, these copper ore lumps are easily available in different dimensions, sizes and can be customized as per the demand of our esteemed clients.
Copper Ore We are reckoned as one of the most outstanding Copper Ore Suppliers in the nation.
We offer an inexplicable range of copper ore that are obtained from best Copper Ore Mines of the country.
Additional Information:
Item Code: KBT-MD-002
Minimum Order Quantity: 100 ton
Port of Dispatch: Surat, Gujarat
Production Capacity: 10000 Ton
Delivery Time: 10 Day After confirmation
Packaging Details: As per customer requirement.
Medtronic is a multinational medical technology company that produces a wide range of medical devices and solutions. The term "SITUATE BODY SCANNER LITE" suggests a medical imaging device or system designed for scanning or imaging the human body.
Here are some general considerations:
Imaging Technology: The device is likely equipped with imaging technology for visualizing internal structures of the body. This could include X-ray, computed tomography (CT), magnetic resonance imaging (MRI), or other imaging modalities.
Lite Version: The "Lite" designation may indicate a version of the scanner that could be more portable, compact, or focused on specific imaging applications compared to a full-scale body scanner.
Situational Awareness: The term "SITUATE" might imply a focus on situational awareness, which could be relevant in medical contexts where quick and accurate imaging is essential.
26455 Auto Code Scanner Obdii Code Scanner Yd209 Suppliers
Short on time? Let Auto Code Scanner Obdii Code Scanner Yd209 sellers contact you.
