Description:
Integral blade stabilizer is an important tool in the drilling engineering to control the well deviation. It can stabilize the drilling tools in the drilling process of oil, gas and geological exploration. It can increase the bit life, drilling speed and well bore quality. There are two kinds of integral stabilizers: spiral integral blade stabilizer and straight integral blade stabilizer.
Hardfacing type: hf1000, hf2000, hf3000, hf4000
All products will be made according to API and related international standard as per customers' requirements.
Integral blade stabilizer is an important tool in the drilling engineering to control the well deviation. It can stabilize the drilling tools in the drilling process of oil, gas and geological exploration. It can increase the bit life, drilling speed and well bore quality. There are two kinds of integral stabilizers: spiral integral blade stabilizer and straight integral blade stabilizer.
Hardfacing type: HF1000, HF2000, HF3000, HF4000
All products will be made according to api and related international standard as per customers' requirements.
Integral blade stabilizer is an important tool in the drilling engineering to control the well deviation. It can stabilize the drilling tools in the drilling process of oil, gas and geological exploration. It can increase the bit life, drilling speed and well bore quality. There are two kinds of integral stabilizers: spiral integral blade stabilizer and straight integral blade stabilizer.
Hardfacing type: hf1000, hf2000, hf3000, hf4000
The Integral Spiral Blade Stabilizer is made from AISI 4145H modified alloy steel, and completely meets the requirement of API Spec 7-1 and SY/T5051-91 Standard. It is mainly used to stabilize the drilling tools in the process of drilling hole. It can be separated into Drill String and Near bit types.
Description
Integral blade stabilizer
Hekang provides integral straight blade stabilizer, integral spiral blade stabilizer, replaceable sleeve stabilizer, non-rotating stabilizer (rubber sleeve stabilizer), hard facing stabilizer, 3-piece sleeve replaceable stabilizer, float valve stabilizer, spherical stabilizer, variable diameter stabilizer, etc. All above products comply with api spec 7.
Integral 3-spiral blade stabilizer, integral 4-spiral blade stabilizer (string type, near bit type). The working hardfacing surface (also called as wall contact) materials available separately are carbide insert, insert diamond compound, low temperature brazing tungsten carbide slug, surface bead welding abrasive welding rod, etc.
Technical specifications and parameters
(in)(mm)end od
(mm)id
(mm)kit length (mm)connection
Our factory downhole offers stabilizers in straight and spiral orientation with two material options:
Alloy steel stabilizers
Non-magnetic stabilizers
Wl149-711
Integral blade stabilizer is an important tools in drilling engineersing to control the well devination, it can stabilze the drilling ttools in the drilling process of oil, gas and geological exloration. it can increase the bit life, drilling speed and well bore quality, there are two kinds of integral stabilizers, spiral blade stabilizer and straight integral blade stabilizer.
Hard fasing type: HF1000, HF2000, HF3000, HF4000 etc.
API 7K Drill stabilizer 9.5in body 23" integral spiral blade stabilizer rotary stabilizer
Automatic single-sided saw bone meat machine with 1pcs saw blade, automatic bone meat cutting machine
Main features :
1.You can choose to use a single saw or a double saw for product stability,
or a single saw for unstable products .
2.Ensure the hygiene of the meat and ensure a smooth cutting surface
3.Waterproof design for quick cleaning
4.According to dfferent uses ,froze meat ,lamb chops, steak ,fish
5.Adopting human-machine interface and intelligent operation panel
6.30 sets of memory functions can be set
7.Feeding adopts servo motor ,with high precision
8.The conveyor belt can be removed for cleaning paramters :
cutting thickness: 1-50mm, Material thickness under 15cm .Capacity 8-15times/min
Paramters:
Machine size : 1350x2170x1700mm
Workbench size: 650x800
Food height for card loading (mm): 150
Dimensional accuracy (mm): 0.1
Cut thickness (mm): 80
The highest saw blade movement (m/s): 34
Saw blade specification (mm): 3084x16x0.56
Motor power (Kw): 3.5
Voltage: 380V/50HZ
Weight: 1100KG
Pressure increase (MPa): 0.4
Air volume requirement (L/min): 10
Cut back (times/minute): 10
Semi automatic saw bone meat machine With fine-tuning, bone meat cutting machine
Main features :
1.You can choose to use a single saw or a double saw for product stability,
or a single saw for unstable products .
2.Ensure the hygiene of the meat and ensure a smooth cutting surface
3.Waterproof design for quick cleaning
4.According to dfferent uses ,froze meat ,lamb chops, steak ,fish
5.Adopting human-machine interface and intelligent operation panel
6.30 sets of memory functions can be set
7.Feeding adopts servo motor ,with high precision
8.The conveyor belt can be removed for cleaning paramters :
cutting thickness: 1-50mm, Material thickness under 15cm .Capacity 8-15times/min
Parameters :
Voltage: 380V
Power: 1.5KW
Operating speed: 1500m/min
Saw blade length: 2000mm
Cutting ruler: 300 * 220mm
Workbench size: 657 * 525mm
Machine size: 800 * 600 * 1520mm
Machine weight: 80kg
Fully automatic reciprocating double-sided saw bone machine,fully automatic bone cutting machine
Main features :
1.You can choose to use a single saw or a double saw for product stability,
or a single saw for unstable products .
2.Ensure the hygiene of the meat and ensure a smooth cutting surface
3.Waterproof design for quick cleaning
4.According to dfferent uses ,froze meat ,lamb chops, steak ,fish
5.Adopting human-machine interface and intelligent operation panel
6.30 sets of memory functions can be set
7.Feeding adopts servo motor ,with high precision
8.The conveyor belt can be removed for cleaning paramters :
cutting thickness: 1-50mm, Material thickness under 15cm .Capacity 8-15times/min
Parameters:
Reciprocating double-sided saw
Machine size 1620*1550*1720mm
Working table size 500 *600mm
By height 300mm
Dimensional accuracy: ±1mm
Maximum cutting height: 300mm
Sawblade line speed: 44m/s
Saw blade specification: 3250mm
Voltage: 380V/50HZ
Power: 3.95kw
Air pressure: 0.8MPa
Machine weight: 500kg
Elevate your industrial projects with our premium Finger Joint Woodboard, meticulously crafted to meet the rigorous demands of the manufacturing sector. Designed for durability, sustainability, and versatility, our woodboards are optimized to enhance efficiency and performance across a myriad of applications.
Precision Finger Joint Construction: Engineered with precision finger joint technology, ensuring superior strength and stability for industrial applications.
High-Quality Materials: Crafted from select hardwoods, our woodboards boast exceptional durability and resilience, capable of withstanding heavy-duty usage.
Environmentally Friendly: Committed to sustainability, our woodboards are sourced from responsibly managed forests, minimizing environmental impact while promoting renewable resources.
Uniform Dimensions: Each woodboard is precisely machined to uniform dimensions, facilitating seamless integration into manufacturing processes and minimizing waste.
Versatile Applications: From furniture manufacturing to construction projects, our Finger Joint Woodboards excel in a wide range of industrial applications, offering unparalleled adaptability
API 7-1 IB String Stabilizer with Non-magnetic Body
Product Description
The stabilizer with back reaming is selecting the appropriate location and through special processing method to array few teeth as a cutting edge. In this way, this stabilizer can be played cutting when the process of drilling and pull out. During drilling process, forward and backward redressing can be played the role to repair and maintain the wall of well, making trajectory of borehole as far as possible, more often than not leading to drilling difficulty because of hole shrinkage, and so on, at the moment, the forward and backward redressing of this stabilizer can be played cutting, to eliminate hole shrinkage phenomenon, thus saving time and costs for drilling.
Features
(1). Sizes and configurations can be manufactured to operators requirements, including blade sizes, connections, and types of material.
(2). All stabilizers connections can be configured as box Ã? box, as pin Ã? box, or as the operator requires.
(3). Welded straight blade for drilling soft formations.
(4). Sleeve type allowing less equipment inventory in remote locations.
(5). Integral spiral blade allowing 3600 hole contact for use in hard rock formations.
(6). Nonmagnetic stabilizers for applications requiring magnetic isolation.
The Integral Spiral Blade Stabilizer is made from AISI 4145H modified alloy steel, and completely meets the requirement of API Spec 7-1 and SY/T5051-91 Standard. It is mainly used to stabilize the drilling tools in the process of drilling hole. It can be separated into Drill String and Near bit types.
Integral blade stabilizer is an important tool in the drilling engineering to control the well deviation. It can stabilize the drilling tools in the drilling process of oil, gas and geological exploration. It can increase the bit life, drilling speed and well bore quality. There are two kinds of integral stabilizers: spiral integral blade stabilizer and straight integral blade stabilizer
Hardfacing type: HF1000, HF2000, HF3000, HF4000
Integral blade stabilizer is an important tool in the drilling engineering to control the well deviation. It can stabilize the drilling tools in the drilling process of oil, gas and geological exploration. It can increase the bit life, drilling speed and well bore quality. There are two kinds of integral stabilizers: spiral integral blade stabilizer and straight integral blade stabilizer
Hardfacing type: HF1000, HF2000, HF3000, HF4000
AS PS ABS PLA HDPE Granules
Acrylonitrile - styrene copolymer.
Acrylonitrile - styrene copolymer. A polymer composed of acrylonitrile and styrene.Typically 15-50% styrene.Transparent solid with yellow to amber needle color.The density of 1.06.It's thermoplastic.Not easy to change color.It is unaffected by diluteacids,bases, alcohols and gasoline.But soluble in acetone, ethyl acetate, dichloroethylene and so on.Can be used as
engineering plastics.Excellent heat resistance and solvent resistance.
Application.
1. General grade: cassettes, trash cans, toothbrush handles, lamp covers, pen tube, Cup with cover, cosmetic cases.
2. Special grade: blade of fan, batteries housing, lighters.
3. Refrigerator Sleeves, Miscellaneous
4.Used for pots, cups, milk bottles, etc., with high transparency, safety and resistance to falling
5. High Transparency, Heat Resistance, chemical resistance
PC + Glass Fiber reinforced (GF)
The glass fiber (GF) reinforced PC have improved tensile / flexural properties as well as thermal resistance. The FR rating
improves with increase in thickness and the material can acquire a UL94 V0 rating at 3 mm.
Grade: (ML3410-30 / MH3515-30 / MN-3110-30)
1) ML series: ML3405 / ML3410 / ML3420 / ML3430 (10-30% GF)
General GF reinforced PC for standard application, they are characterise by balance of stiffness, modulus and impact.
Application: Watch parts, switches and nobs, OA equipment.
2) MH series: MH-3515 / MH-3520 / MH-3530 (10-30% GF)
Special GF reinforcements for optimal balance between modulus and improved weld line performance. MH series also improve warpage
and dimensional stabilities.
Applications: Watch parts, laptop housings, optical devices, mobile accessories, TV frames.
3) MN series: MN-3110 / MH-3120 / MN-3130 (10-30% GF)
MN series are specially formulated for various kinds of housings and cases. They are characterise by superior impact performance,
surface aesthetics and weld line strengths.
Applications: Meter cases, electrical and electronic housings.
Stearic acid is a saturated fatty acid that plays a crucial role in various industries, including cosmetics, pharmaceuticals, and the production of candles and soaps. It is recognized for its waxy, solid form at room temperature and its versatility as an ingredient. In the cosmetics and skincare industry, stearic acid is commonly used as an emulsifying agent, thickener, and stabilizer in creams, lotions, and cosmetics, imparting a smooth texture and improving product consistency. In the manufacturing of candles and soaps, it acts as a hardening agent, enhancing the durability and structure of these products. Stearic acid's multifunctional properties make it an integral component in numerous consumer goods, contributing to their quality and performance.
Stabilizers are fairly short subs which have blades attached to external surface. By providing support for the BHA (Bottom Hole Assembly) at certain points they can be used to control the trajectory of the well. The blades can be either straight or spiral in shape. Spiral blades can give 360�¯�¿�½?�?�° contact with the borehole.
Orchid Energy Co can provide string stabilizer and near bit stabilizer, straight integral blade stabilizer(IBS),spiral integral blade stabilizer(IBS), replaceable sleeve stabilizer, non-rotating stabilizer, and non magnetic stabilizers etc. Stabilizers are manufactured from 4145H alloy steel bar or forgings, quenched and tempered to 285-341 Brinell hardness; Hard facing types are HF1000, HF2000, HF3000, HF4000, HF5000. All above products are manufactured according to API Spec 7-1 standard.
Options Available:
straight integral blade stabilizer, spiral integral blade stabilizer, replaceable sleeve stabilizer, non-rotating stabilizer or non magnetic stabilizers;
4145H Alloy steel, Non-magnetic steel;
String Type stabilizer, Near Bit Type stabilizer;
ETRO 4+ is a high quality Group III+ base oil, manufactured from a unique feedstock by using a proprietary hydro-treatment - and wax isomerization process and hydrofinished to a colourless liquid. The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship.
Applications:
ETRO 4+ is the preferred choice for formulating cost effective, high-performance, low-viscosity engine oils due to its superb viscometrics and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines.
Features and Benefits:
Very high viscosity index
Excellent volatility for low-viscosity engine oils
Superior low-temperature performance
Good oxidation stability
Formulation Support:
ETRO 4+ is supported with top-tier engine oil formulations that meet the requirements for:
API SN
ILSAC GF-5
ACEA 2012*
OEM Specifications
2362 Api Integral Spiral Blade Stabilizer Suppliers
Short on time? Let Api Integral Spiral Blade Stabilizer sellers contact you.
