Gate valves can be interchanged with Cameron FC,FL series gate valve and fully in accordance with API Spec. 6A, made from modern materials and manufacturing techniques. They are robust, easy to maintain in ther field. Reasonable price and low cost of spares make them the most cost effective valve on the market.
Reliable hydraulic gate valves are complied with API Spec. 6A also.
Features
òManufactured and Tested in Accordance with API.6A and supplied with Full Certification
òSimple structure and renewable gate and seat assembly
òForged body and bonnet
òA True Bi-Directional Valve
òGate to seat, seat to body, bonnet seal and stem backseat are metal to metal sealing
òThe sealing surface of the gate and seat are hardfaced for wear and corrosion resistance.
òGrease fitting in bonnet for easy lubrication
òOne-piece and double-acting gate with long service life
òBoth thrust bearings with large load capacity and composite rubber-plastic stem lip packing reduces operating torque
òStem packing replaceable under full line pressure when valve is in closed position
Available
òNon-rising stem gate valve, rising stem gate valve and hydraulic gate valve.
òMedium: oil, gas, slurry and sour gas
òRated Working Pressure: 2,000psi ~ 20,000psi
òBore Size: all popular
òTemperature: K ~ U
òMaterial Classes: BB ~ HH
òEnd connections: flange, union
òProduct Specification Level: PSL1 ~ PSL4
òPerformance Requirement: PR1, PR2
We supply fc&fl&fls&wkm valves with good quality and very competitive price. Hope to be a partner of your company!
We supply different type of api 6a gate valve including fc&fl&fls, lu, aa-hh, psl1-3, pr1.Pr2. We offer you with a good quality and competitive price.
Our fc gate valve is interchangeable with cameron model fc gate valve. Manufactured and tested in accordance with api spec 6a
Forged steel body and bonnet
A true bi-directional valve
Low operating torque
Quick release hand wheel
Api spec 6a psl, 1, 2, 3
Material classes dd, ee, ff, to nace mr-01-75
Available from 5000 psi to 15, 000 psi in all full-bore sizes
We supply FC&FL&FLS&WKM Valves with good quality and very competitive price. Hope to be a partner of your company!
we supply different type of API 6A gate valve including FC&FL&FLS,LU,AA-HH,PSL1-3,PR1.PR2. we offer you with a good quality and competitive price.
Our FC GATE VALVE is interchangeable with Cameron Model FC Gate Valve. Manufactured and Tested in Accordance with API Spec 6A
Forged Steel Body and Bonnet
A True Bi-Directional Valve
Low Operating Torque
Quick Release Hand Wheel
API Spec 6A PSL, 1, 2, 3
Material Classes DD, EE, FF, to NACE MR-01-75
Available from 5000 psi to 15,000 psi in all Full-Bore Sizes
API 6A Slab Gate Valve
Yulin Machinery This high-performance two-way flat API 6A Slab Gate Valve gate valve is ideal for high pressure critical service applications of 3000 psi to 15000 psi on wellheads, Christmas trees and manifolds.
Product Description
API 6A Slab Gate Valve have PFFA Series and PFF series. Details as below:
PFFA Series Gate valve
Full bore design eliminates efficiently pressure drop and vortex, eliminates washing by solids in fluid.
Mental-to-mental seal is used between bonnet and body, gate and seat body and seat
The surface of gate andseat is weld overlay with hard alloy. which has feature of corrosion resistance and washing resistance.
The bonnet and stem designed with back seal, can replace stem sealing under pressure
One side of bonnet is designed with sealant injection in order to supply sealant and improve seal and lubrication performance of gate and seat.
Can complete with different pneumatic (hydraulic) actuator upon user s requirements
Working Pressure: 2000PSI-20000PSI
Nominal Bore: 1-13/16-9"(46mm-230mm)
Working Medium: oil natural gas mud and gas ,containing hasco
Working Temperature:-46C-121'C(Class LU)
Material Class: AABBccDDEEFFHH
Specification level: PSL1-4
Performance Requirement: PR1-2
53600 Api 6A Gate Valve Suppliers
Short on time? Let Api 6A Gate Valve sellers contact you.
EXPANDING GATE VALVE
Plastic/chevron packing stays clean and free from contaminants to reduce maintenance costs.
Tight mechanical seal is assured with parallel expanding gate design.
This design provide upstream and downstream sealing simultaneously which is not affected by pressure fluctuation and vibration.
A double row roller thrust bearing on the stem makes operation easy,even under full pressure.
Size: 2-1/16"; 2-9/16"; 3-1/8"; 4-1/16",5-1/8",7-1/16",9"
Rated pressure:2000psi,3000psi,5000psi
Working pressure:LU-XX,YY
PR:1-2 PSL:1-4 MC:AA-EE
Honorary Certificate
Our products have been ISO9001 certified and attained API 6A,6D,API 7,7K,and API 16A&16C apprpvals of American Petroleum Institute.All products are fully designed and manufactured in accordance with API,ANSI,GB(national standards)and SY(industry standards)standards.
EXPANDING GATE VALVE
Plastic/chevron packing stays clean and free from contaminants to reduce maintenance costs.
Tight mechanical seal is assured with parallel expanding gate design.
This design provide upstream and downstream sealing simultaneously which is not affected by pressure fluctuation and vibration.
A double row roller thrust bearing on the stem makes operation easy,even under full pressure.
Size: 2-1/16"; 2-9/16"; 3-1/8"; 4-1/16",5-1/8",7-1/16",9"
Rated pressure:2000psi,3000psi,5000psi
Working pressure:LU-XX,YY
PR:1-2 PSL:1-4 MC:AA-EE
Honorary Certificate
Our products have been ISO9001 certified and attained API 6A,6D,API 7,7K,and API 16A&16C apprpvals of American Petroleum Institute.All products are fully designed and manufactured in accordance with API,ANSI,GB(national standards)and SY(industry standards)standards.
Product Description
The LAKE DM Gate Valves are solid gate, rising stem, gate valves with resilient seals. They are purpose made for mud, cement, fracturing and water service and are easy to operate and simple to maintain.
The DM Gate Valves with superior design features precision workmanship and a proven principle are engineered to meet the harsh drilling requirements in todayâ??s oilfield.
DM Series Mud Gate Valves are designed and manufactured in accordance with the following specifications:-
API 6A Specification for Wellhead and Christmas Tree Equipment.
ANSI B31.3 Chemical Plant and Petroleum Refinery Piping.
ASME VIII Boiler and Pressure Vessel Code.
MSS-SP-55 Quality Standard for Steel Castings for Valve, Flanges and Fittings and Other Piping Components.
Hydraulic actuator installed on the top of the bonnet which controls the open and close of the valve by hydraulic pressure
Metal seal between the body and bonnet
Backseat seal between the stem and the bonnet ,easy for the change of sealing stuff under pressure
Sealing surface is hard-faced or the QBQ with the performance of anti-corrosion,wear-resistance
Low operating torque
End Connection: Flange,Thread,Union,BW
Size:1 13/16- 7 1/16
Temperature:K. L .P. R .S. T. U. V
Material:AA. BB. CC. DD. EE. FF
PSL:PSL1-PSL3G
PR:PR1. PR2
Pressure:2000-20000 PSI
Application:Oil, Chemical industry, etc.
Medium:Oil,Gas,Water,etc.
The LAKE DM Gate Valves are solid gate, rising stem, gate valves with resilient seals. They are purpose made for mud, cement, fracturing and water service and are easy to operate and simple to maintain.
The DM Gate Valves with superior design features precision workmanship and a proven principle are engineered to meet the harsh drilling requirements in todayâ??s oilfield.
DM Series Mud Gate Valves are designed and manufactured in accordance with the following specifications:-
API 6A Specification for Wellhead and Christmas Tree Equipment.
ANSI B31.3 Chemical Plant and Petroleum Refinery Piping.
ASME VIII Boiler and Pressure Vessel Code.
MSS-SP-55 Quality Standard for Steel Castings for Valve, Flanges and Fittings and Other Piping Components.
The LAKE DM Gate Valves are solid gate, rising stem, gate valves with resilient seals. They are purpose made for mud, cement, fracturing and water service and are easy to operate and simple to maintain.
The DM Gate Valves with superior design features precision workmanship and a proven principle are engineered to meet the harsh drilling requirements in todays oilfield.
DM Series Mud Gate Valves are designed and manufactured in accordance with the following specifications:-
API 6A Specification for Wellhead and Christmas Tree Equipment.
ANSI B31.3 Chemical Plant and Petroleum Refinery Piping.
ASME VIII Boiler and Pressure Vessel Code.
MSS-SP-55 Quality Standard for Steel Castings for Valve, Flanges and Fittings and Other Piping Components.
Gate valves(ball screw operation)
The ball-screw operation gate valve was developed for large-bore applications, to provide manual operation at full working pressure with remakably low opening torque.The design eliminates the need for gear-type torque multipliers, and results in quicker, safer operations.
The ball-screw operation gate valve shares the basic features of the "ls"series:a slab gate, patented seat seal, non-elastomeric stem seals, and metal-to-metal sealing.However, the ball-screw operation gate valve has a lower balancing stem and unique ball screw mechanism
Size:3-1/16", 4-1/16", 5-1/8", 7-1/16"
Wp:10, 000psi, 15, 000psi
Temperature:l u, pu
Mat's:aa-ff psl:1-4 pr:1-2
Honorary certificate
Our products have been iso9001 certified and attained api 6a, 6d, api 7, 7k, and api 16a&16c approvals of american pertroleum insitute.All products are fully designed and manufactured in accordance with api, ansi, gb(national standards)and sy(industry standards)standards.
The Oilman FL Gate Valve isValve a full-bore,
through-conduit valve available in standard double flange, threaded-end and special block body configurations. It is a forged valve which is available in 2,000, 3000 and 5000 psi WP AND IN BORE SIZES FROM 2-1/16" TO 4-1/16" and can be fitted with a wide range of actuators.
SPECIFICATIONBi-directional design provides flow direction versatility an increased service life.Positive metal-to-metal sealing (GATE to SEAT and SEAT to BODY).Simple, reliable gate and seat design promotes ease of field service and minimal spare parts inventory.Spring-loaded, pressure energized, non-elastomeric lip-seal between each seat and body assists in low pressure sealing. It also protects against intrusion of particle contaminants into the body cavity and seal areas.Stem seal design covers full range of pressure, temperatures, and fluids encountered in wellhead and manifold service.Metal- to-metal bonnet seal.Stem can be back seated to allw stem seal replacement with valve under pressure.Grease injection fitting located downstream od stem backseat for safety. Fitting located in bonnet, eliminating body penetration.Bearing cap grease fitting allows positive bearing lubrication.Easy closing nd sealing without excessive force.FL-E Type Valve Availability
Woring Pressure(PSI) Nominal Size (inch)
2000 2-1/16 2-9/16 3-1/8 4-1/16
3000 2-1/16 2-9/16 3-1/8 4-1/16
5000 2-1/16 2-9/16 3-1/8 4-1/16
Gate valves(ball screw operation)
The ball-screw operation gate valve was developed for large-bore applications, to provide manual operation at full working pressure with remakably low opening torque.The design eliminates the need for gear-type torque multipliers, and results in quicker, safer operations.
The ball-screw operation gate valve shares the basic features of the "ls"series:a slab gate, patented seat seal, non-elastomeric stem seals, and metal-to-metal sealing.However, the ball-screw operation gate valve has a lower balancing stem and unique ball screw mechanism
Size:3-1/16", 4-1/16", 5-1/8", 7-1/16"
Wp:10, 000psi, 15, 000psi
Temperature:l u, pu
Mat's:aa-ff psl:1-4 pr:1-2
Honorary certificate
Our products have been iso9001 certified and attained api 6a, 6d, api 7, 7k, and api 16a&16c approvals of american pertroleum insitute.All products are fully designed and manufactured in accordance with api, ansi, gb(national standards)and sy(industry standards)standards.
