Bend is a kind of metal pipe joints with ball bearing, is in the united states FMC company transfer of technology digestion, absorption and production of technical innovation on the base of series products, its specifications are 1"-4", the rated working pressure of 25-140 Mpa(3629 psi- 20000psi), can provide the normal temperature, low temperture and sulfurous gas under the condition of using various typeds of elbow and repair kits.
1 Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA.
2 Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa).
3 We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space.
4 Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load.
5 All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment.
6 Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced.
7 Usually good lubrication can ensure that swivel joints work normally without much maintenance.
1. High quality rotary joints and two delicate bearing installed in high stiffness rotor are to ensure vibration-free performance in long-term operation.
2. Rotors undergo special heat treatment to increase stiffness.
3. Stationary ring enclosure is made out of concentrated carbon graphite, anti-wear-out, waterproof, and suitable for dry operation.
4. Especially the area of rotating sealing faces has to be minimized to the minimum, even under higher-pressure environment.
5. The effect of equilibrium in sealing face from accumulation of our company experiences in mechanics is the best.
6. Adaptation of stationary ring made out of bronze in RF-type rotating connector is for the use in high-pressure 200 bar.
we supply the quality Green Chilli (3.3 % Capsaicin) Oleoresin to people looking for pure and organic product. This is 100% pure and safe to use as it is free from chemical compounds.
Botany
Green Chilli plant grows to a height of 3ft that belongs to the Solanaceae of the plant kingdom. It bears small flowers and hasa long fruit that are known as chillies or pods. Fresh dried green chillies are used for the extraction of oleoresins that appears green in color. The liquid thus, obtained is liquid at room temperature. Green Chilli Oleoresin (3.3 % capsaicin) is a sharp liquid that has a refreshing aroma which is similar to the aroma of capsicum.
Benefits of Green Chilli (3.3 % Capsaicin) Oleoresins
â?¢ Green Chilli (3.3 % Capsaicin) Oleoresins can be used to add complexity to beverage flavours.
â?¢ It can be used in confectioneries where it imparts major role.
â?¢ These oleoresins can be used in pickles, seafood, canned food, medicine, cosmetics, etc.
â?¢ Oleoresin obtained from green chilli is used to treat headache, mouth sores, joint problems, etc.
Precautionary Measures!
â?¢ If you are allergic to green chilli, avoid using Green Chilli (3.3 % Capsaicin) Oleoresins as it might cause unwanted reactions on its use.
â?¢ Nursing mother should seek medical advice before using this oleoresin.
Ginger Grass Essential Oil A Fusion of Culinary Delight and Holistic Healing
Embark on a journey of flavor and wellbeing with Ginger Grass Essential Oil a versatile essence that elevates your culinary experience while nurturing your mind and body Elevate your senses with the purest form of this natural essential oil delivered to your doorstep by the esteemed Aromas Oils
Botanical Insight
Cymbopogan martini var sofia commonly known as gingergrass stands as a perennial dense herb resembling grass Native to India this herb flaunts long narrow stems and vibrant purple flowers Belonging to the Poaceae plant family gingergrass reaches a height of approximately 4 feet
Overview of Ginger Grass Essential Oil
Derived through the meticulous process of steam distillation from the leaves of the gingergrass herb this essential oil mirrors the fragrance of lemongrass a delightful blend of citrusy woody and grassy notes The yellowhued liquid offers holistic healing through aromatic inhalation or topical application
Benefits of Ginger Grass Essential Oil
The antiinflammatory and antibacterial properties make it effective in treating skin issues like acne pimples boils and blackheads With antiseptic qualities the oil facilitates the healing of wounds cuts and abrasions on the skin Acts as a natural insect repellent when combined with a carrier oil Eases joint and muscle pain when topically applied to the affected areas
Blends Well With
Gingergrass essential oil harmoniously blends with Guaiacwood Cananga and Amyris creating delightful and aromatic combinations
Precautionary Measures
Due to its concentrated nature always dilute Ginger Grass Essential Oil before topical or oral use Highly phototoxic avoid exposing this oil to direct sunlight Pregnant and nursing women should consult a doctor before incorporating this oil into their routine
Specifications
Botanical Name Cymbopogan Martini Var Sofia
CASÂ 8023925
Color amp Odor Yellow to light brown liquid Characteristic citrus odor
FEMA Â No
Methods of Extraction Steam Distillation
Constituents Geraniol transpmenthene8diol12 cis and transdihydrocarvone
Solubility Soluble in ethanol
Specific Gravity 08940953
Flash Point 220 F
Optical Rotation 2985
Major Constituents Geraniol transpmenthene8diol12 cis and transdihydrocarvone
Preserving Natures Essence
Transfer the received essential oil from Aromas Oils in aluminum containers to amber dark glass bottles Store these bottles in cool shaded areas shielding them from direct sunlight and heat ensuring the preservation of their essence until expiration
Global Outreach
As a dedicated Ginger Grass essential oil wholesale supplier Aromas Oils extends its delivery services globally reaching the UK US Canada Australia New Zealand South Korea China Taiwan Thailand Vietnam South Africa France Spain Poland Romania Serbia and various other countries
Merbau is native to Southeast Asia. This species is most well known for its durability and fire resistance and therefore is used in outdoor engineering works and marine applications. Merbau is also extremely common in decking applications and furniture. We sell merbau is 19 x 90 and 19 x 140 cuts as well as dressed all round merbau and finger jointed material.
We are also one of the few merbau sellers who sell our stocks in set lengths as opposed to random which enables our customers to pick out their preferred lengths.
CHICKEN WINGS, PAWS & FEET
We are producers of German origin Frozen Chicken and we are looking for serious buyers to extend our long term business. We supply at both CIF and FOB terms at any port safe port without any problem. Our product meet both International and National Standards.
we are certified to supply to china ,Hong Kong and worldwide
We can supply various Frozen Chicken cuts such as;
1. Whole chicken. Please indicate the size that you want.
2. Chicken leg quarter/Chicken whole leg
3. Chicken drum stick
4. Chicken thigh
5. Chicken boneless leg
6. Chicken paw
7. Chicken wing tips
8. Chicken 2 joint wing
9. Chicken whole leg boneless with skin on
10. Chicken feet
11. Chicken gizzards
12. Chicken wing middle joint
13. Chicken inner fillet middle half cut
14. Chicken boneless and skinless breast without inner fillet
15. Chicken half breast boneless and skinless without inner fillet
and all other Chicken parts.
We provide quality Grade A chicken products and reasonable prices.
contact us for more detals.
PLEASE CONTACT DIRECTLY WITH YOUR DETAILS COMPANY INFORMATION such as; PHONE NUMBER AND EMAIL ADDRESS FOR MORE DETAILS ABOUT OUR PRODUCTS.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Available in sizes 3/4" through 3 " up to 15,000 PSI non-stock cold working pressure, our Swivel Joints offer the following features.
Minimum flow restriction
Heavy duty hex head style ball loading plug
Grease retainer ring (ensures clean ball race)
Standard packing units
Superior hardened ball races ensure uniform surface hardness and depth for longer life under severe thrust and radial loading
Standard Swivel Joints are provided with API line pipe threads.
Other end connections are available on request
Available for standard and sour service
All sizes are available in 8 styles, for 360 rotation in 1, 2 or 3 planes.
Our Turmeric Powder is made from dried turmeric root, retaining its warm, earthy flavor and golden yellow hue. The distinct aroma of turmeric adds a comforting depth to a variety of dishes. It's a must- have in curries, soups, and even teas, bringing both flavor and health benefits.
Taste & Aroma: Warm, earthy, slightly bitter with a peppery, aromatic fragrance that fills the air.
Color: Bright, golden yellow, just like fresh turmeric root.
Uses: Great in curries, soups, rice dishes, or even stirred into smoothies for a health boost. Turmeric is also the base for the popular "golden milk."
Health Benefits: Rich in curcumin, known for its anti-inflammatory effects and potential to promote joint health and digestive well-being.
Convenience: Long-lasting and easy to store, turmeric is an essential spice that adds both color and health benefits to your cooking.
Product Details:
Usage/Application Industrial
Type Lap Joint Flanges
Size 1-5 inch, 0-1 inch, 20-30 inch, 5-10 inch, 10-20 inch
Material Standard ASTM A182, ANSI B16.5, ASTM A351, ASTM A105
Rated Pressure (Bar) 2500
I Deal In New Only
Material Stainless Steel
Country of Origin Made in India
We can offer vide range of Lap Joint Flanges from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. Various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Fittings, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc.
Specifications: Can offer Lap Joint Flanges as cast, forged, normalized, annealed, quenched (hardened) tempered condition with black or bright (proof machined) finish.
Various type of IBR approved Flanges that can be procured are as follows: Blind, Slp-On, Welding Neck (Weldneck), Long Welding Neck (LWN), Socket Weld, Lap Joint, Threaded, Spectacle Blind, Plate, Collar, Flat Face, Raised Face, Ring Type Joint, etc.
Size range of flanges that can be offered are �½â?? inch upto 60â?? inch depending on type, class grade of flanges.
Class of flanges: #150, #300, #400, #600, #900, #1500, #2500
Product Details
UsageApplication Industrial
Type Lap Joint Flanges
Size 15 inch 01 inch 2030 inch 510 inch 1020 inch
Material Standard ASTM A182 ANSI B165 ASTM A351 ASTM A105
Rated Pressure Bar 2500
I Deal In New Only
Material Stainless Steel
Country of Origin Made in India
Minimum Order Quantity 1 Piece
Rated Pressure Bar 150 300 400 600 900 1500 2500
We can offer vide range of Lap Joint Flanges from ready stock or on make to order basis are currently supplying to UK IranTehran Saudi Arabia Spain Bahrain Nigeria Dubai Egypt Malaysia etc Various steel products such as Angles Channels Beams Billets Blooms Round Bars Square Bars Rectangular Bars Flat Bars Forged Bars Rolled Bars Concast Bars Pipe Fittings Elbow Tee Reducer Cross Stub End End Caps Forged Stampings Pipes Tube Tubing Fasteners Bolts Nuts Washers Screws Studs Plates Sheets Coil etc
Flange Standards API 6A ANSI ASME DIN EN10921 UNI JISKS BS4504 GB AWWA C207 GOST PSI
Specifications Can offer Lap Joint Flanges as cast forged normalized annealed quenched hardened tempered condition with black or bright proof machined finish
Various type of IBR approved Flanges that can be procured are as follows Blind SlpOn Welding Neck Weldneck Long Welding Neck LWN Socket Weld Lap Joint Threaded Spectacle Blind Plate Collar Flat Face Raised Face Ring Type Joint etc
Size range of flanges that can be offered are inch upto 60 inch depending on type class grade of flanges
Class of flanges 150 300 400 600 900 1500 2500
IBR approved Flanges can be avail in various grade materials as mention below
Ceramic Fiber product is made from long flexible bulk fiber which is a high temperature fire resistance material containing of pure alumina, silica & zirconia.
It is used for various applications some of are reformer of furnace, tube seal, gasket & expansion joint, high temperature pipe, duct, turbine insulations, kiln car insulations & seals, boiler insulation and many more insulation purposes.
Metal Aids India a accredited with AN ISO 9001: 2015, 14001: 2015, OHSAS 18001 & PED Certified Company and was established in since 2010. We take the pleasure to introduce ourselves as a largest Manufacture & Exporter of all type of industries products like Flange, Forging Flange, Component Flanges, Precision Different Component Flanges in different shape & size (as per client drawing & specification) etc in CNC Lathe & Milling Machine (VMC)
Description: Stainless Steel Flange
Specification: ASTM / ASME B16.5, ASME N 16.47 SERIES
Size: 1/2" To 48" (15 NB To 1500 NB)
Type : Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectable, Ring Joint Flanges
Class : 150#, 300#, 400#, 600#, 900#, 1500#, 2500#
Form : Circle, Square, Plate, Ring, Flat
Grade :
Specification: ASTM / ASME B16.5, ASME N 16.47 SERIES
Metal Aids India a accredited with AN ISO 9001: 2015, 14001: 2015, OHSAS 18001 & PED Certified Company and was established in since 2010. We take the pleasure to introduce ourselves as a largest Manufacture & Exporter of all type of industries products like Flange, Forging Flange, Component Flanges, Precision Different Component Flanges in different shape & size (as per client drawing & specification) etc in CNC Lathe & Milling Machine (VMC)
Description: Stainless Steel Flange
Specification: ASTM / ASME B16.5, ASME N 16.47 SERIES
Size: 1/2\" To 48\" (15 NB To 1500 NB)
Type : Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectable, Ring Joint Flanges
Class : 150#, 300#, 400#, 600#, 900#, 1500#, 2500#
Form : Circle, Square, Plate, Ring, Flat
Grade :
Specification: ASTM / ASME B16.5, ASME N 16.47 SERIES
Metal Aids India a accredited with AN ISO 9001: 2015, 14001: 2015, OHSAS 18001 & PED Certified Company and was established in since 2010. We take the pleasure to introduce ourselves as a largest Manufacture & Exporter of all type of industries products like Flange, Forging Flange, Component Flanges, Precision Different Component Flanges in different shape & size (as per client drawing & specification) etc in CNC Lathe & Milling Machine (VMC)
Description: Stainless Steel Flange
Specification: ASTM / ASME B16.5, ASME N 16.47 SERIES
Size: 1/2" To 48" (15 NB To 1500 NB)
Type : Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectable, Ring Joint Flanges
Class : 150#, 300#, 400#, 600#, 900#, 1500#, 2500#
Form : Circle, Square, Plate, Ring, Flat
Grade :
Specification: ASTM / ASME B16.5, ASME N 16.47 SERIES
