Find Verified Anode Block Suppliers, Manufacturers and Wholesalers

Anode block
The anode block is used in the 18 groove of the electrolytic cell. In the life cycle of anode carbon block, with anode were gradually consumed, anode mechanism driven carbon anode piece of the fall to ensure the electrolyzer stable configurations. When used for a certain period of time, the carbon block has become very thin (about L3 ~ 18cm), in order to prevent the molten electrolyte for the anode steel claw must replace the new anode carbon block group. These residual carbon blocks are called as residues. High calorific value, dry without water, 1 tons equivalent to 1.5 tons of metallurgical coke. Maximal residual anode carbon block is generally in the range of 15% to 25%.
Residual very for a long time and electrolyte contact containing higher electrolyte components, such as aluminum, sodium, potassium, calcium, magnesium, lithium, fluorine composition, appearance is often accompanied by electrolyte formed by crust. Residue after cleaning can be used in the production process of anode materials. From the electrolytic tank to replace the residual polar group, to remove residual surface electrolyte shell, and then use the residual anode pressure disengaging machine or manual remnant pole and the guide rod is separated. With a hammer or press off and make the steel claw separating ring on iron claw. Residual anode on the residual electrolyte should be carefully cleaned, carbon product conductivity and oxidation activity of these electrolytes because, due to the gas permeation and gasification, the volume density of the residual anode decreased. After crushing and screening, the residues are divided into different sizes, which are used as a kind of aggregate to be added when the anode carbon block or anode paste is produced. Residues can also be used as fuel for smelting.
Physical and chemical index
Test item
Detection index
Test item
Detection index
C
More than 98%
Ash
Less than or equal to 5%
Total S
Less than or equal to 1.5%
Volatile parts
Less than or equal to 2.3%
Water
Less than or equal to 1%
Quantity of heat
8000 calories
Anode block application
Generally speaking, the tank after stripping and cleaning the anode mud, can be melted and cast anode. Some lower pole can also be used for other purposes, for example, copper sunset very as cold material added to the converter, can also be used as a raw material for manufacture of copper sulfate; nickel residual anode can be used for manufacturing of nickel ions in the electrolyte.

Anodes butts or spent anodes are carbon blocks used to conduct electrical energy during the process of producing primary aluminium.

Anode Carbon Block

Pre-baked Carbon Anode
carbon anode block (Pre-baked Carbon Anode / carbon anode block / Carbon Anode Scraps ) is a neutral refractory product made of carbonaceous as raw materials, adding appropriate amount of binder.
Carbon anode block raw materials include anthracite, coke and graphite, as well as asphalt, tar and anthracene oil and other bonding agent. AS anthracite volatile less, and has dense structure, carbon anode block use it as aggregate, adding metallurgical coke (coal), and asphalt as a binder.

Name Of Product : Anode / Carbon Block
Product Origin : Any Country
Minimum Order : 300-500MT
Harmonization System (HS) Code : 3801.10
Minimum Order Size : 150MM - 600MM
Packaging details : Loose / Jumbo Bags In Container

Carbon Anode Scrap / Anode Carbon Blocks
Specs: F.C 96%min,
Ash 1%max,
V.M 1.5%max,
S 2.5%max,
Moisture 1%max,
please contact me for pricing and
availability.

Carbon Anode Scrap / Anode Carbon Blocks
Specs: F.C 96%min,
Ash 1%max,
V.M 1.5%max,
S 2.5%max,
Moisture 1%max,
please contact me for pricing and
availability.

Anode Carbon / Carbon Block

Moisture - 3.2
Ash -1.3
Volatile - 0.75
Fixed carbon - 95-97
Sulphur - 2.3
GCV - 7657
Size you requested ??
50-150mm, 100-200mm or 200-400mm

SIZE:100-600mm 30-80mm 1-6mm
CARBON CONTENT: 95-97%
SULPHUR: 2.0%
MOISTRURE: NO MORE THAN 2%,
IN BULK
HS CODE:3801...
Country of Origin : middle East Malaysia China

Dear Buyers,

We are dealing with supplying of Carbon Anode Blocks (FC-95%) from GCC countries in Bulk Quantity.

- Product name: Tumi Ishi Wood Rock
- Color: Natural wood color
- Material: Pine Wood
- Shape and Size: Random
- Type: Other Educational Toys
- Usage: Relax and Educate

Refractory Burner Blocks are special type of Block which are form of Refractory ceramic material. It is used for Boiler, furnace, kiln, fireplaces & fireboxes.

Quality:
We offer various quality Burner Block are IS-6, IS-8, PI - 30% to 70% Alumina offering high temperature resistance of 1100 C to 1700 C & Special brick as per require technical data considering to application of Brick.

Sizes of Burner Block (Inch):
9 x 9 x 9
12 x 12 x 12
14 x 14 x 14
16 x 16 x 16

REMELTED ZINC BLOCK
ZINC 99.92%, ALU 0.002% , PB 0.003%, CD 0.002%, FE 0.003%

What are Tumi Ishi Wood Rocks?
Tumi Ishi wood rocks are an open-ended wood toy that will provide hours of relaxing, and challenging fun. These handmade blocks are great for boosting focus, and attention, and for promoting creativity
Tumi Ishi wood rocks are handmade and unique (no two blocks are the same). The blocks measure approximately 2 to 4 inches, and the weight of each block varies depending on the wood species

Calcium Silicate compound is obtained by reaction of Silica & Calcium oxide. This compound is commonly used to insulate high temperature Pipe, equipment & for fire endurance application.

Calcium Silicate have high compressive strength, resistance to damage from tumbling, ability to maintain its properties without loss of insulating efficiency, are rigid, reusable, light in weight and have long life.

Solid particular board
Glue : E1/E2
100% Pinewood
Size : 44 mm 3x7
38 mm 3x7
33 mm 3x7

Gremlog Trading DMCC is a leading supplier of recycled carbon anodes, a sustainable solution with versatile applications. Derived from a meticulous recycling process, our recycled carbon anodes serve as essential components in aluminum smelting, facilitating efficient electrolytic reactions. Carbon Anodes / Anode Butts represent the residual portion of prebaked anode carbon blocks used in electrolytic tanks.Our Carbon Anodes / Anode Butts boasts a high calorific value and low moisture content, making it an ideal choice for various applications. The calorific value of 1 ton of Carbon Anode Scrap is equivalent to that of 1.5 tons of metallurgical coke, showcasing its efficiency and energy density.At Gremlog, we go beyond supplying raw materials. Our in-house Engineering Division is equipped to provide comprehensive support, ensuring a thorough understanding of individual requirements. This commitment to excellence positions us as your reliable partner for superior-quality Carbon Anode Scrap and unparalleled technical expertise.This sustainable alternative not only reduces environmental impact but also contributes to cost efficiency in aluminum production. Elevate your industrial processes with our recycled carbon anodes, where innovation meets environmental responsibility.Explore the quality offerings of Carbon Anodes / Anode Butts at Gremlog Trading DMCC

Indonesia origin Bare core MANUFACTURER ***** Albazia Falcata Bare Core / Barecore
***** For making Block Board or FURNITURE COMPONENT ***** Cutting 13.2mmx1250mmx2500mm ***** Premium export grade ^^^^^ Smooth and Flat Surfaces ***** MC under 13% **** Loading in 40hq = 54 cbm """""payment bank transfer 50% deposit and 50% balance against copy of B/L after shipment released

For smelters that produce Carbon Anodes, Gremlog provides spent Anodes (Anode Butts) from a variety of smelters with different qualities. Those Anode Butts can be used again as raw material for the production of Anodes.

We have a variety of different sizes including : 0-1mm/ 1-4mm/ 4-10mm/ 10-30mm/ 30-50mm/ 50-100mm/ 100-500mm / 100-1200 mm / As per request

Carbon Anode FC: 93-96 %

Indonesia Barecore MANUFACTURER ***** Albazia Falcata Bare Core / Barecore
***** For making Block Board ***** Cutting 13.2mmx1250mmx2500mm ***** Premium export grade ^^^^^ Smooth and Flat Surfaces ***** MC under 13% **** Loading in 40hq = 54 cbm """""payment bank transfer 50% deposit and 50% balance against copy of B/L after shipment released