Function description : long-range reader
12-15v single power supply;
Support weigand26, rs485, aba, rs485interface
Features: designed wholly by independent intellectual property rights; high performance; support id card; maximum effective distance up to 100cm and its contour can be specially made by client's requirement.
Access control system
9-15v single power supply
Support weigand26, rs485, aba and rs485interfaces or other format protocol optional
Features: high reliable design, support custom-made protocol, new contour, gentles line and lofty style
Intelligent access controller:
1. It can control all kinds of electronic locks.
2. It is simple to connect up, work steady, high-power switch power inside, voltage accommodation wide range, the general system doesn't need impress power, inlay the electric box of 86 serial standards inside, suit to environmental, rainproof, and waterproof, defend the sunshine from direct radiation.
3. Inductive, untouched, prevent wear out, long service life.
4. Controlled by electricity, open quickly.
5. With triple-password-confirming function.
6. Great amount of storage: 900 users, 2000 records.
7. Can choose the remote controller for the device.
Notice:
The ht2110_1 is online model,
The ht2110b_1 is offline model
Electric parameters:
Input voltage: ac90v~240v
Ouzim BioEngine2 Biometric Fingerprint Access Control for security entrance solution
Model: BioEngine2
Supports multiple authentication multifunction: fingerprint, passcode and cards.
1. 3,000 fingerprints +3,000 cards +3,000 passcode + 200,000 records
2. Support Mifare card 13.56 MHz +ID card 125KHZ
3. 360-degree rotation identification, high sensitive to identify. No need film cover on the sensor
4.
73096 Access Control Suppliers
Short on time? Let Access Control sellers contact you.
Features:
Suitable for access control.
High reliablity and high security.
Quick response
Wide color selection.
Customize serial number per your requirement.
Read only, otp, programable.
Specifications:
Card read distance: 0-10 cm
Chip: em4100, t5577
Working temperature: -10 ~ 70?
Storge temperature:-20~80?
Wide rel. Humdity range : 10 to 90 %
Material: abs
Breakthru Solutions is the leading access control management system dealer in Bangalore. We offer flexible fingerprint door lock, visitor management system, card access control security system for corporate and organization in Bangalore.
QuadXs2c is one of the most successful controller presently available in the market. Client includes large corporates like firstsource, Ranbaxy, Myntra and many more. This is one of the most flexible hard ware with 4 completely configurable outputs and 8 General purpose inputs. Further integration with fire is possible very smoothly. It supports weigand / HID based readers
Features:
4 door / 8 reader Controller
Supports access control of up to 4 doors in all respect including 4 entry readers, 4 exit readers, 4 locks, 4 exit switches etc
Multiple RFID Technologies
Supports all latest RFID technologies with inbuilt EM reader and option of having Mifare/HID iClass/ HID Pros.
Network interface
Leveraging on the merits of IP based systems, it can easily be hooked up on the existing TCR/IP network. Thus the data can be transferred instantaneously in real time mode to a centralized server.
Field Upgradable Firmware
Facility to onsite upgrade the firmware over Ethernet interlace so that any customisation or new version can be easily upgraded without any need of removing the device or physical presence of the engineer near the device
Protected Enclosures
Both controller & power supply unit are protected with suitable housing so electronic circuit boards are not exposed to cause any accidental damage.
Anti Pass Back
Door wise antipassback. Entry to the particular door is allowed only when the employee has exited through the same door.
Door Interlocking
Facility of door interlocking is available. The system allows creating a group of doors such that access to a door .thin the group is allowed only when all the other doors are in closed condition.
Excellent Price Performance Ratio
With a lower price to performance ratio ROI is automatically enhanced, the factor contributing to higher ROI is not only very competitive pricing but also higher accuracy rate offered by the product
Fully configurable GPI and GPO
Optically Isolated inputs for 4 Door Sensor, 4 Exit Switch & 8 General purpose digital inputs along with 4 General purpose relay outputs. These are fully configurable.
For more feel free to reach out to us in case any clarification is required.
Resilient Technologies
M. No. - +91 9810995267
Visit on: www.resilienttec.com
Corporate office: 578 | UdyogVihar Phase V | Gurgaon – 122001
Branch office: 465 | Pocket E-16 | Rohini | New Delhi – 110085
Two Door / Four Reader Controller
TwinXs 3S is a versatile access control panel and supports 2 doors and 4 access readers. The controller can be configured as standalone / Master or Slave. The controller supports host of other rule based features apart from global anti pass back.
High Speed Controller with Large Memory
The controller has high speed 32 bit processor and has a large storage of 4GB. It has a capacity to store 200000 card holder database and last 500000 event buffer. The high speed processor facilitates access decisions in milliseconds.
Local Programming
The controller has LCD display and a 12 key keypad. This interface allows use to even program the controller without attaching it to the host computer. Also it facilitates on field diagnostics.
Compact Design
The controller size is very compact with respect to the number of interfaces. Also it has field pluggable connectors which helps in ease of wiring and termination. The controller is housed in powder coated MS cabinet along with rugged 5 amp power supply. All the reader ports are current limited there by ensuring that the controller doesn’t go down even when any of the port is sorted or malfunctioning.
Data Communication and Protocols
The controller supports popular communication interfaces viz 10/100 mbps ethernet, CAN and RS485. Master/Slave configuration can be implemented over any of these interfaces. In addition, it supports multiple protocols such as HTTP, SNMP, SMTP, FTP, SSL & NTP. It also supports MODBUS protocol over ethernet for integration.
Fully Programmable I/O’s
The controller has 8 optically isolated digital inputs out of which 4 are general purpose fully programmable, 2 dedicated for door sensor inputs, and 2 dedicated for egress switch inputs. Also the controller has 4 general purpose outputs apart from lock control outputs. The general purpose outputs are available as potential free contacts.
Configurable Reader Interface
The reader interface is configurable. The controller also supports legacy clock/ data interface in addition to more popular weigand interface. The weigand interface is configurable from 24 to 64 bits.
Field Upgradable Software
Facility to onsite update device software through ethernet interface. The product updates can easily be applied without the need of removing device and sending it back to the service center.
For more feel free to reach out to us in case any clarification is required.
Resilient Technologies
M. No. - +91 9810995267
Visit on: www.resilienttec.com
Corporate office: 578 | UdyogVihar Phase V | Gurgaon – 122001
Branch office: 465 | Pocket E-16 | Rohini | New Delhi – 110085
Elevator Access Control systems allow users to access to designated floors. Elevator access can depend on the user’s classification, the time zone, which elevator is being approached, and the armed state of a floor. In addition, changes to the status of a zone can either cause elevator to grant access to a floor, or cause the elevator to deny access. By using one or more of these attributes, you can create elevator access control policies that are extremely flexible and secure. By using an elevator access control system, you can separate the general public and unauthorized users from the authorized users.
Features:
• One Controller per elevator car: Per elevator car one Elevator Access Controller (EAC) is must. There is no communication between two distinct elevator cars and only one card reader can be interfaced, which will be inside the elevator.
• Supports up to 52 Floors: An EAC supports 12 floors including ground floor and a basement floor. It can be attached to Elevator Access Control Expansion Board (EACEB) using FRC connector which supports additional 10 floors. Each EAC can be attached to maximum 4 EACEB to control a total of 52 floors using 1 EAC and 4 EACEB with the option of floor control relay from the EAC being directly interface with the elevators floor control buttons.
• Supports elevator car floor selection button for programming: The elevator floor buttons are used for programming the user cards in standalone mode. The programming mode is protected by a master card. On showing it one can add, edit or delete a user card. While adding or editing, one can select floors where the user is allowed.
• Supports Fail safe mode: On power failure of EAC elevator car works in normal mode in which anyone can move to any floor.
• Inbuilt RJ45 Network Interface: Leveraging on the merits of IP based system; it can easily be hooked up on the existing TCP/IP network. Thus the data can be transferred instantaneously in real time mode to a centralized server.
• Field Upgradable Firmware: Facility to onsite upgrade the firmware over Ethernet interface so that any customization or new version can be easily upgraded without any need of removing the device
Advantages:
• Easy to install and configure
• Embedded network interface for easy connectivity
• Industry standard weigand input facilitates to connect with any readers.
• Cost saving
For more feel free to reach out to us in case any clarification is required.
Resilient Technologies
M. No. - +91 9810995267
Visit on: www.resilienttec.com
Corporate office: 578 | UdyogVihar Phase V | Gurgaon – 122001
Branch office: 465 | Pocket E-16 | Rohini | New Delhi – 110085
TwinXs2c is one of the most successful controller presently available in the market. Client includes large corporates like firstsource, Ranbaxy, Myntra and many more. This is one of the most flexible hard ware with 4 completely configurable outputs and 8 General purpose inputs. Further integration with fire is possible very smoothly. It supports weigand / HID based readers
Features:
2 door / 4 reader Controller
Supports access control of up to 2 doors in all respect including 2 entry readers, 2 exit readers, 2 locks, 2 exit switches etc.
Multiple RFID Technologies
Supports all latest RFID technologies with inbuilt EM reader and option of having Mifare/HID iClass/ HID Pros.
Network interface
Leveraging on the merits of IP based systems, it can easily be hooked up on the existing TCR/IP network. Thus the data can be transferred instantaneously in real time mode to a centralized server.
Field Upgradable Firmware
Facility to onsite upgrade the firmware over Ethernet interlace so that any customisation or new version can be easily upgraded without any need of removing the device or physical presence of the engineer near the device
Protected Enclosures
Both controller & power supply unit are protected with suitable housing so electronic circuit boards are not exposed to cause any accidental damage.
Anti Pass Back
Door wise antipassback. Entry to the particular door is allowed only when the employee has exited through the same door.
Door Interlocking
Facility of door interlocking is available. The system allows creating a group of doors such that access to a door .thin the group is allowed only when all the other doors are in closed condition.
Excellent Price Performance Ratio
With a lower price to performance ratio ROI is automatically enhanced, the factor contributing to higher ROI is not only very competitive pricing but also higher accuracy rate offered by the product
Fully configurable GPI and GPO
Optically Isolated inputs for 4 Door Sensor, 4 Exit Switch & 8 General purpose digital inputs along with 4 General purpose relay outputs. These are fully configurable.
For more feel free to reach out to us in case any clarification is required.
Resilient Technologies
M. No. - +91 9810995267
Visit on: www.resilienttec.com
Corporate office: 578 | UdyogVihar Phase V | Gurgaon – 122001
Branch office: 465 | Pocket E-16 | Rohini | New Delhi – 110085
This is a tailor made enterprise solution System capable of performing multiple operations at several locations to get accurate and instant information related to Access and Time & Attendance management. It permits single-point administration of individual control systems, feeding the processed data to enterprise management systems, thus allowing analysis of building operations. It is designed to withstand harsh environment and also prevents unauthorized access into predefined restricted areas within the perimeter of your organization. The system is compatible with Proximity (RFID & Smartcards) and Biometric (Fingerprint) Readers. The system shall be capable of operating an electro magnetic lock / electric strike/Turnstile/ barrier or Gate.
Features
• Enterprise wide solutions.
• TCP/IP Connectivity enables easy and fast Communication management across Enterprise through LAN/WAN/Internet.
• Access Rights: Configurable in various modes
• Can store upto 8,000 records
• Can be used for 1 to 4 controllers, reducing cost of upgradation to Readers only.
• Data retention upto 5 yrs incase of power failure.
• Online Data Capturing Facility for instant monitoring and control.
• Cross Platform compatible.
• Compatible with most legacy systems.
• Multiple choices of Time Zones.
• Prompt updation of door controller Tables.
• Punching allowed when updation is in progress.
• Designed to work in Online/Offline Mode.
• Safety feature: can be integrated with Fire Panel to release doors in case of emergency
• Hot swappable Power Module Controller card: Helps maintain the BMS without shutting down the system.
• Heavy duty Euro connectors: Avoids additional internal cabling and enhances reliability of the system.
• Provision for self cooling of the system: Provision of exhaust fan, which is automatically switched ON when the predefined temperature level is reached on the Temperature Controller.
Specifications
• Electrical: 230 volts + / - 10 % (two power inputs, can be given from 2 different phase / source in case of redundant power supply only)
• SMPS: Single power supply, Can be made redundant by providing dual Power supply.
• Enclosure: Aluminum
• Emergency Exit Door: provision to control 1 emergency exit
• Software Modules: BMS Pro : BMS lite
• Time & Attendance (Optional)
• Dimensions: 445(L) x 380(H) x 205(W) mm
• Weight: 8.75kg approx
Can made-to-order appearance
With charge and discharge circuit
With "push" input, electrical signal input and electric lock output interface
High efficiency of pure copper transformers and huge wiring terminal
Appearance size: 182*79*62mm
Standard packing: 20pcs.
5a can be customized
Weight:1.04kg
Gar:3008a (waterproof, confirm to ip85):
Work voltage:ac&dc9-28v ;static current:<=30ma
Reading range:3-8cm;capacity: 2000 users
Ambient temperature:-25-60;ambient humidity:10%-90%
Electricity lock output:<=3a;alarm output:<=20a
Output short circuit protection time:<=100us
Open time:0 - 99 seconds (adjustable)
Size:120 *80*25mm
Independent password: can only use password which irrelevant with the card to open the door, can be used as smart card reader
