Ethanol alcohol distillation column
1. It is standard 95-96% alcohol equipment. Also it can distill pure water.
2.The distillation system has  three columns  and  continuous  distillation  process.The process is the  same as industrial(large scale) alcohol equipment.
 Mash distillation  column distills  fermented  mash or light alcohol  to 50% alcohol ethanol .
It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste, Â ethanol discharge in waste 0.05%, better than international standard requirements.
The first rectification distillation  column  increases  alcohol degree  to 70-75% ,  separates  fusel oil and high boiling point  Impurities.  It auto discharges waste water,  ethanol discharge in waste 0.05%, better than international standard requirements.
The second rectification distillation  column  increases alcohol degree to 95%,  separates low boiling point  impurities  like acetaldehyde and methanol .
3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration  module, even  you can run it by a button.
Distillation column For Ethanol Alcohol Plant
1. It is standard 95-96% alcohol equipment. Also it can distill pure water.
2. The distillation system has three columns and continuous distillation process.The process is the same as industrial(large scale) alcohol equipment.
    a. Mash distillation column distills fermented mash or light alcohol to 50% alcohol ethanol .
 It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste, ethanol discharge in waste ?¤0.05%, better than international standard requirements.
    b. The first rectification distillation column increases alcohol degree to 70-75% , separates fusel oil and high boiling point Impurities. It auto discharges waste water, ethanol discharge in waste ?¤0.05%, better than international standard requirements.
    c. The second rectification distillation column increases alcohol degree to 95%, separates low boiling point impurities like acetaldehyde and methanol .
3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration module, even you can run it by a button.
Lactic Acid Liquid, E270, CAS no.50-21-5, Chemical Formula C3H6O3, is a carboxylic acid manufacturing process through fermentation from corn starch. The lactic acid is a yellowish to colorless liquid, property having a mild acid odor and taste. Many bacterial species produce lactic acid, with Lactobacillus, Bifidobacterium, Streptococcus, Pediococcus and Leuconostoc. Lactic acid used as acid ingredient in sour dairy products, fermented fruits and vegetables and in sausages.
As an experienced Lactic Acid Liquid manufacturer and supplier, we has been supplying and exporting Lactic Acid Liquid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
ITEM STANDARD
APPEARANCE YELLOWISH LIQUID
ASSAY 80% MIN
HEAVY METALS(AS Pb) 0.001% MAX
IRON 0.001% MAX
ARSENIC 0.0003% MAX
CHLORIDE 0.2% MAX
SULPHATED ASH 0.1% MAX
RESIDUE ON IGNITION 0.1% MAX
SUGAR PASS TEST
Lactic acid Pharma Grade specification
ITEM STANDARD
Content % 85-90
chloride % 0.002
sulphate % 0.01
iron % 0.001
residualon ignition 0.1
heavy metal % 0.001
arsenate % 0.0001
free carbonizing % no brown color at interface
reducing sugar % no red sediment
Our Company is a well-known name in the industry we are engaged in offering the best quality� Alfalfa Hay Bales. Our offered products are prepared using the latest technologies. These products are offered at very affordable rates.
The size is (16 x 27 x 32 inch), wherein the approximate bale weight of each bale will be 50 Kgs.
Technical Specification:
Protein: 16% to 22%
Fat: 1.5% to 2.5%
Fibre: 24% to 32%
Ash: 2.5% to 6%
Moisture: 10% to 12%
As in reference to the supply of Alfalfa Hay, we would like to share following details related to same:
Alfalfa Haying Process is done through Sun Drying Process, which is called Sun Curing Process. The haying process is totally manual and labour intensive process.
The dry matter recovery is variable in nature. The dry matter means the hay residue of the same
The pricing will fluctuate based on the dry matter recovery.
The baling is done with a static baler in fixed size.
During the sun curing process, the green pigments are lost. Which is a direct loss of Vitamin AD3. In order to avoid the loss of green pigmentation and core vitamin value of the forage, two-stage haying is executed by HAF�®. Stage One is direct sun curing and in Stage two passive sun curing is done in Net House. During the second stage of sun curing, high water content forage on drying process turns to Bottle Green Colour (which visually looks blackish green).
Sometimes lump formation is evident in hay bales and its because the hay in post sun curing process reaches to Moisture level around 6% or 7 %. During the baling process, a mild spray of saline water is applied to the hay (which adds 0.34% Moisture). That enables the appropriate binding process of � the double-compressed bales. The usage of saline water (instead of regular water) for spraying prevents the microbial and toxin growth in the hay.
Internationally accepted standard of Moisture in hay is 17%, whereas our hay has Moisture not above 9% in total.
The shelf life of the HAF Alfalfa Hay is 30 Months and its all because of its meticulous processing methodology
The bales must not come in direct sun light. Due to Photosensitivity, the green leafy material may loose green pigments.
The standard weight of the Bale will be 45 Kgs or 50 Kgs, depending on the volume of the dry hay.
JH series gear reducers for cement kilnsare involute cylindrical gear units with parallel shafts which has four reduction stages.This series has four basic structure including over 50 types.Thanks to the standardized,series and modulated design,the reducers can be manufactured according to standard or specific requirements at customers'choice with good reliabiity and maintenance.
PE coil pipes and tubes for water and wire cable conduit PL231
The PE coil pipes and tubes can be used:
water pipe 4 â?? 6 â?? 1-inch black coil with pressure 1.6mpa, OD 20-75mm, WT 2.3-6.8mm
pe conduit cable embedded wire cable and optical cable, OD 20-200mm, WT 1.8-3.5mm
weak current protection tube and communication tube, OD 20-200mm, WT 1.8-3.5mm
We use new 100% pure raw PE material
WHY NEW MATERIAL HDPE PIPES?
1. Health performance
PE pipe processing without adding heavy metal salt stabilizer, no scaling layer, and no bacteria.
2. Corrosion resistance
It can resist various chemical media erosion, with no electrochemical corrosion.
3. Service life
Under rated temperature and pressure conditions, PE pipes can be used for more than 50 years.
4. Impact resistance
PE pipe toughness, high impact strength, heavy objects directly pressed through the pipeline will not break.
5. Connection performance
The strength of the hot melt or electric melt interface of the polyethylene HDPE pipe is higher than that of the pipe body, and the joint will not be broken due to soil movement or live load.
6. Construction performance
It has a lightweight pipe weight, a simple welding process, convenient construction, and a low overall project cost.
MOQ: 10,000 Barrels per Month
Supply Ability: 1,000,000 Barrels per Month
JP54 Technical Specifications:
ADDITIVES
Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3
COMBUSTION PROPERTIES
Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM
COMPOSITION
Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952
VOLATILITY
Initial boiling point centigrade max report 123 D 96
10% vol at C 240
20% vol at C report
50% vol at C report
80% vol at C report
End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298
LOW TEMPERATURES PROPERTIES
freezing point centigrade max 40 15 D 1298
Corrosion copper (2hrs at 100 C)
Corrosion silver (4 hrs at 500C) max 1 227
STABILITY
Thermal stability control temp. 280C 323
Filter pressure, differential mm. Hg max 25
Tube deposit rating (visual) max <3
CONTAMINATION
Existent gum mg/100 ml max 7 131 D 361 Water reaction, interface rating max 16 258 D 1084 Fuel whit static dissipater additives min 75 D 3648 Fuel without static dissipater additives min 85
Color light yellow to yellowish white.
Butter will be manufactured with cow's milk.
Color and smell natural.
Expiry date 24months after production date. Not older than 30 days from the date of shipment. All packages bear production and expiration date.
Taste pure, mild acid, not rancid.
Chemical Specifications
Pure butter fat not less than 82%
Moisture and milk solids total not more than 18%
Iodine index 33-43 range
Saponification value 210-235 range
Polenske index 1.5-3.7 range
Free fatty acid 0.3% max
Peroxide value 0.6 meq/kg. max
Melting inter 30-34 range
Radio activity (Cs137) content in butter less than 10bq/kg
Microbiological Specifications
Coliforms absent
Yeasts and modules max 50 per gr.
Salmonella absent per 25gr
E.coli absent
