DaShi ANYK-R17 Rack System is a configurable media converter rack that can host 16 slots of media converters and 1 slot net manage card.A wide range of media converters is available depending on your variety of network cabling environment. These optional media converters include UTP to multimode or single mode fiber cable. The Chassis provides a central power supply to the converters and serves as a converter center and wiring concentrator.
1. Hot Swappable
The design of the power system is based on an idea of providing maximum flexibility and redundancy. In this way, you may remove any of the two power supplies without turning off the system.
2. Redundancy
During operation, both power supplies are switched on and share the current load. In case that one of them should fail, the other will instantaneously take 100% of the load without any loss. Similarly, if one power supply is removed from servicing, it can be switched off and removed while the chassis continues 3.functioning.
3. Protection System
The power of each converter bay comes from the two shared power supplies. Each bay is isolated from each other under a certain protection mechanism, so that it is free from any problem that might occur to the power supplies or faulty converter bay. This is the best solution to protect your investment in media converters.
4. Media Converters
The functions of all 16 slots in ANYK-OaxxH-x-1-1M are identical. 2U Media Converter Moule series can work independently and be installed into any available slot of ANYK-OAxxH-x-1-1M;
Parameter:
shape size: 426mm*278mm*88mm* (internal power supply )
weight: 5KG
power source: 100v-275VAC, 50-60Hz ,100A
Operation Temperature:0ípC-60ípC
Humidity:5%-95%
Storage Temperature:-10ípC-70ípC
Application: WAN and LAN system( FTTB,FTTH ) ISP suppliers
STHS Consulting Ltd is an official partner of OMPECO Middle East, Africa, Asia and Pacific Islands (www.ompeco.me). I can be contacted at stephen@ompeco.me for matters concerning this order.
Our product, The Converter, is an innovative way to manage waste, transforming all forms of rubbish into a safe, dry, and reduced final product using a completely mechanical process that harnesses the principle of mechanical to thermal energy transformation.
The key benefits of OMPECO are:
- Zero Emissions: No pollutants or harmful substances released.
- Safe Output Material: Produces sterile, odourless, dust-free, non-fermenting, and vermin-free material.
- Significant Reduction: Up to 50% weight reduction and up to 80% volume reduction- Zero Landfill.
- Environmentally Friendly: No use of chemicals, combustion, microwaves, or pressure.
The Converter is a 100% sustainable, zero waste, zero emission solution that eliminates the need for waste separation. Simply load the machine, The Converter will remove any liquid, converting the waste into premium grade refused derived fuel (RDF) with high calorific value in only 30 minutes. The resulting RDF is a sterile, inert flock suitable for fuel or domestic disposal, eliminating odors, dust, and refrigeration needs while ensuring long-term storage stability. This can then be safely stored or even sold on for use in the circular economy (see attachment on medical waste)
GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and
high security power services.
Safe and reliable
High quality li-ion cell for mobile use
Laser welding connection with high strength and low impedance
Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation
Damping pad design to improve the impact resistance of the system
IP54 safe and reliable operation in outdoor environment
Serially designed PCS and battery pack eliminates circulating current and improve system reliability.
Integrated BMS,DC, AC multi-layer protection, maximum safety performance design
Efficient and Convenient
Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion
Easy access to PV and diesel generator, intelligent muli-energy management.
Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring
Multi systems could be connected in parallel
Cost optimization
One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc.
Small size, light weight, less space and installation cost
Long cycle life, low failure rate, reduce operation and maintenance investment
Maximize green energy utilization.
Features :
3 times peak power, excellent loading capability.
Combine inverter/solar controller/battery all in one.
Multiple output : 2*AC output socket, 4*DC 12V, 2*
Working mode AC prior/ECO mode/Solar prior selectable
AC charging current 0 1 0A selectable.
LVD/HVD/Charging voltage adjutable, suitable for kinds of battery
Adding fault code to monitor real time work situations
Continuous stable p ure sine wave output with inbuilt AVR stabilizer .
Digital LCD and LED for visualization of operation status of the equipment.
Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
Input Voltage 12V / 24V DC optional
Output Voltage 115V / 230V AC optional
Portable power for AC products, AC outlets for connecting multiple loads
High surge capacity for products that require more power to start
High efficiency converts virtually all of the battery's power to AC
Mounting brackets for convenient installation
Heavy duty stud-connection mounting
RS232 communication port
WIFI/BMS Optional
Overload and over temperature shut down
Low voltage and over voltage alarm/cut off
Input reverse protection
Short circuit protection
PI15 series is a pure sine wave inverter, high frequency machine solution, the product is small size, the solution is reliable and stable, the main function is to invert the DC 12VDC battery or 24VDC battery to AC 230VAC or AC 115VAC output, mainly used for emergency use Electricity, car inverter,
outdoor electricity and other occasions.
11232 17 Slots Nms Media Converter Rack For Converter Suppliers
Short on time? Let 17 Slots Nms Media Converter Rack For Converter sellers contact you.
Rated power : 5KW
Pure sine wave solar inverter
Output power factor 1
Built-in 80A MPPT solar charger
Built-in anti-dust kit for harsh environment
Support parallel operation up to 3 units (available for 3KW-5.5KW 48V)
WIFI remote monitoring (optional)
Compatible to generator
VFD for biomass burner, biomass gasification burner. For electric cabinet frequency and voltage converting, to meet different countries voltage. Ensure the bioamss burner can work well.
Eastman advanced Grid Tied inverters seamlessly convert solar energy into a reliable power source, ensuring a continuous and efficient supply for your needs.
Parameter
Specifications
Access mode
10/100mbps
Standard
Ieee802.3 10base-t ethernet, ieee802.3u, 100base-tx/fx fast ethernet, ieee802.3x flow control, ieee802.1q vlan, ieee802.1p qos, ieee802.1d spanning tree
Wavelength
850nm/1310nm/1550nm
Transmission distance
Single-fiber single-mode: 25/40/60/80/100km ; category-5 twisted pair: 100m
Port
One rj45 connector, connected to stp/utp category-5 twisted pair one fiber port: multi-mode - sc or st (fiber size: 50, 62.5/125µm) single mode - sc/fc fiber port (fiber size: 9/125µm) single-fiber single-mode - sc/fc fiber port (fiber size: 9/125µm)
Conversion mode
Medium conversion, storing and forwarding
Mac address table
I k
Buffer space
1mbit
Flow control
Full duplex state: flow control; half duplex state: back pressure mode
Delay
9.6us
Bit error rate
<1/1000000000
Mtbf
100, 000 hours
Led
Power tx link ( fiber link action ), tp link1000, tp link100, tp act ) fdx (fx full duplex mode), fx100 (fiber, with a transmission rate of 100m) tp1/2/3/4 link/act (1/2/3/4-port twisted pairs connection action) tp1/2/3/4100 (1/2/3/4-port twisted pairs, with a transmission rate of 100m)
Two 10/100m electrical ports, one single-mode or multi-mode optical port
Multi-mode transmission distance: 2km, single-mode transmission distance: 120km, single-strand double-directions /double-strand double-directions.
Set - in 1m cache, supporting 2k mac address self-learning and self-updating capability
Supports forcible execution the cross of 10m, 100m, full-duplex, half-duplex, twisted-pair and automatically adapt to connect auto mdix function directly
Supports rate control function and the rate can been controlled between nx64k (n=1~1600) to 100mbps
Supports renovate system automatically function, support system regular refresh automatically via setting time, protect from system halted
Supports management based on web, snmp, telnet or local console
Supports lld(search disconnected link automatically), llr(return alarm message when disconnected link found)
Supports llcf(report the disconnected alarm message to local network administration)
Detect and control the operational states of electrical port and optical port of the near end and the far end via interface of management
Supports open or close electrical and optical ports through via the far end network management
Supports legal maximum packet size up to 1912 bytes, support cisco, isl and vtp
Physical property:
Input power: ac 100v~220v or dc 48v
Dimension: 191mm x 110mm x 25mm
Environment requirements:
Operating temperature: 0¦-50¦
Storage temperature: -40¦-70¦
Environment humidity: 5-90%(non-condensing)
SFP Slot 10/100/1000M Optic Media Converter
pls contact us for more details
info[at]hongkien[dot]com
10/100/1000Base-TX to 1000Base-FX Converter
Standards: IEEE802.3 IEEE802.3U, 10/100/1000Base-TX, 1000Base-FX
Interface: 1x RJ-45 connector 1x SFP Slot
Flow Control: TEEE802.3x Flow control for full duplex mode.
Back-pressure flow control for half duplex model
Our water Hyacinth Tatami Cushion is made of Water Hyacinth in Ninh Binh, Vietnam combine with textile and foam. It's durable, beautiful and eco-friendly. 100% handmade from natural material by skillful craftsman. Ecofriendly non-toxic and durable in function. Available in variety of design and colors for choice and can be customized.
Material: Water hyacinth and acacia wood
Color: Natural, brown, black, white....we can make at any color you want.
Size: Dia 60x40cm, 45x35 cm, 40x40 cm, 40x20 cm, as customer's request
Origin: Vietnam
Feature: Adjustable (height), Foldable, Adjustable (other), Convertible
Usage: Home furniture
10gbps media converter, 90 to 240v ac, 12v dc adapter power source type
Specifications:
Interface:
Left side:
One 10gbps rj-45 port
One 10gbps sfp + port (mini-gbic)
Right side:
One rs-232 console port (rj-45 connector)
One power jack
Wire speed cable length: up to 100m cat6a cable for wire speed transmission
Transceiver (phy), teranetics chip for 10gbase-t and net logic chip for 10gbase-r
Temperature:
Main features
In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 1000 Base-TX, IEEE802.3z, IEEE802.3abstandard
Built in high efficiency SRAM for packet buffer, with 1K-entry lookup table and 4-way associative hash algorithm
Half duplex: back pressure flow control
Full duplex: IEEE802.3x flow control
Automatic identification of MDI/MDI-X cross line
Technical parameter:
Standard protocol: IEEE802.3 10 Base-T standard, IEEE 802.3u 1000Base-TX and IEEE802.3z standard
Connector: one UTPRJ-45 connector, one SC/ST connector
Operation mode: full duplex mode or half duplex mode
Power supply parameter:
Adapter(External): 110-265V AC input, 5V1A DC output
Power(Internal): 110-265V AC input, 5V1A DC output
Environmental temperature: 0 - 50
Relative humidity: 5%-90%
TP cable: Cat5 UTP cable
Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140ª¦m
single mode: 8.3/125, 8.7/125, 9/125 or 10/125
Dimensions:
Power external: 94mm(L)x 71mm(W) x 26mm(H)
Power internal: 150mm(L) x 110mm(W)x 28mm(H)
Media Converter, 10/100M 1310nm SM 5km
Fiber optic media converter
Skype:wirenettehnology
Features :
Surporting : Full duplex and half duplex transmission and capable of automatic negotiation. efficient builtin switching core ,to implement flow control and reduce broadcast packets.
Surporting : The transmission of extra-long packes over VLAN
Surporting : The selection of mutiple types of fiber ports such as dual-fiber multi-mode .dual-fiber single mode and single fiber single mode, to satisty the extended requirements of users.
Technical specifications
Parameter
Specifications
Access mode
10/100Mbps
Standard
IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
