The GE Respiratory Flow Sensor Cable, Neonatal is a replacement respiratory-care cable designed to connect a neonatal flow sensor to compatible GE ventilator systems. GE HealthCare identifies Item/Part No. 1505-5604-000 as a neonatal flow sensor cable supplied in a quantity of one. It is listed for compatibility with CARESCAPE R860 and Engstram ventilators.
Additional Features:
Excellent insulation properties
Weather resistant
Operating temperature ranges from -55C up to 105C
Flame retardant
Flammability rating UL 94V-0
Complies to standard: EU REACH
RoHS compliant
Product Category : Respiratory Care
Patient Type : Neonatal
Quantity : 1 cable
Application : Neonatal flow-sensor connection
Connector System : Male cable-to-cable / female snap-type
Genuine GE-compatible replacement accessory
Designed specifically for neonatal flow-sensor applications
Supports neonatal respiratory monitoring
Abrasion and tear-resistant construction
Rectangular Mesh products in 6.0m x 2.4m sheet sizes are general-purpose ribbed mesh sheets used to reinforce concrete slabs.
*SPECIFICATIONS*
Material Carbon Steel
Grade 500 Mpa
Length 6000mm x 2400mm
Main Wire: 6.75@100, 7.60@100. 8.60@100, 9.50@100, 10.70@100, 11.90@100 mm
Cross Wire: 7.60@200 mm
*STANDARDS*
Manufactured in accordance with AS/NZS 4671:2019
ACRS Certified
NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS)
*PACKAGING*
Unit of Measure Sheets
Pack Type Bundles
FCL Quantity 25MT
Premium-quality copper cathode manufactured to international standards with a minimum copper purity of 99.99%. Produced using advanced electrolytic refining technology for superior conductivity, corrosion resistance, and consistent quality. Suitable for wire rods, electrical cables, transformers, electronics, construction, automotive, and industrial manufacturing applications. Available in export-grade packaging with bulk shipment capability and flexible delivery terms.
294 Wires Cables Suppliers
Short on time? Let Wires Cables sellers contact you.
Trench Mesh products in 6.0m x (200mm, 300mm, 400mm, and 500mm) sheet sizes and are a general-purpose ribbed mesh sheet used to reinforce concrete slabs with a narrow profile.
*SPECIFICATIONS*
Material Carbon Steel
Grade 500 Mpa
Length 6000mm x (200mm, 300mm, 400mm, or 500mm);
width is dependent on number of wires (3,4, 5, or 6)
Main Wire: 7.60@100, 10.70@100, 11.90@100 mm
Cross Wire: 4.00@300, 4.75@300 mm
*STANDARDS*
Manufactured in accordance with AS/NZS 4671:2019
ACRS Certified
NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS)
*PACKAGING*
Unit of Measure Sheets
Pack Type Bundles
FCL Quantity 25MT
Square Mesh products in 6.0m x 2.4m sheet sizes are general-purpose ribbed mesh sheet used to reinforce concrete slabs.
*SPECIFICATIONS*
Material Carbon Steel
Grade 500 Mpa
Length 6000mm x 2400mm
Main Wire (mm): 6.00@200, 6.75@200, 7.60@200, 8.60@200, 9.50@200, 7.60@100 mm
*STANDARDS*
Manufactured in accordance with AS/NZS 4671:2019
ACRS Certified
NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS)
*PACKAGING*
Unit of Measure Sheets
Pack Type Bundles
FCL Quantity 25MT
Alloy Or Not:Non-alloy
Special Use:Free Cutting Steel
Model Number:3.5m
Tensile strength:low/mild/high
Application:Manufacturing, stranded conductors/ACSR/cable/fencing gab
Packing:Standard
Coil weight:3-8t
Technique:Zinc coating
Coated or not:Coated
Car bodies, we do not add any tyres, fuel tanks, engines etc as these are sold as separate scrap items. They will contain the seats and rear suspension which is mainly hms.The car bundles also have substantial amounts of copper cables through wiring left in, portions of aluminium etc. Hence from metal recovery perspective the economics become better as all these additional metals are recovered from these car bales. They are free of all fluids and oil effluents.
Size of 1 bales is 90x60 and the length varies on length of feed.
Average loading in 20 ft container is 20-21 mt but in 40 hc its 25-26 mt.
The B30 monitor is a modular multiparameter patient monitor. The monitor is especially designed for monitoring in PACU, ED, Wards, Step down units, ICU, CCU and OR in regions where anesthesia gas monitoring is not required. It can also be used during transportation within the hospital.
The modular design makes the system flexible and easy to upgrade.
The monitor can be run either on mains power or batteries. Battery operation is initiated when the power cord is disconnected or when the mains power is lost during monitoring.
NOTE: Always use the B30 with batteries inserted. Otherwise all trend data and temporary settings are lost if the power cable is detached from the mains.
Specifications
Condition : Used
Stock Number : 00002
Shovels tools used for digging, scooping, and moving bulk materials.
Texture: Hand shovels feature smooth, powder-coated steel blades and ergonomic grip handles. Mining shovels have a rough, heavily textured, cast-steel armor surface with ultra-hard, granular weld-on teeth.
Style: Hand shovels are slim, lightweight, and single-operator oriented. Mining shovels are colossal, track-mounted, lattice-boom or hydraulic-arm heavy industrial structures.
Design: Manual variants use a simple dished blade attached to a straight shaft. Mining variants use a cable-actuated or hydraulic front-loading dipper bucket with a bottom-opening door.
Usage: Hand shovels move garden soil, sand, or snow. Mining shovels excavate massive mineral blast faces and load 300-tonne haul trucks in three to four rapid cycles.
Our 500 MPa deformed bar is supplied in a range of bar diameters with ribbed profile providing a locking anchorage with surrounding concrete. Diameters over 36mm are available upon special order.
*STANDARDS*
Manufactured in accordance with AS/NZS 4671:2019
ACRS Certified
NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS)
*PACKAGING*
Unit of Measure Metric Ton (MT)
Pack Type Bundle
FCL Quantity 25MT
*SPECIFICATIONS*
Thickness: 3 ~ 26 mm available in other sizes on request
Width: 25 ~ 220 mm available in other sizes on request
Length Available: 6000/9000/12000 mm
Copper Millberry scrap 99.97% - 99.99%
Large quantities 4,000-5,000 MT per month
Buyers located in China, Taiwan, Philippines & Australia
Buyers will engage once they can see photos (geotagged/time stamped) of the stock on hand with either date on a sign or with the name of the potential customer to see the stockpile exists and is ready to be traded.
