The GE Respiratory Flow Sensor Cable, Neonatal is a replacement respiratory-care cable designed to connect a neonatal flow sensor to compatible GE ventilator systems. GE HealthCare identifies Item/Part No. 1505-5604-000 as a neonatal flow sensor cable supplied in a quantity of one. It is listed for compatibility with CARESCAPE R860 and Engstram ventilators.
Additional Features:
Excellent insulation properties
Weather resistant
Operating temperature ranges from -55C up to 105C
Flame retardant
Flammability rating UL 94V-0
Complies to standard: EU REACH
RoHS compliant
Product Category : Respiratory Care
Patient Type : Neonatal
Quantity : 1 cable
Application : Neonatal flow-sensor connection
Connector System : Male cable-to-cable / female snap-type
Genuine GE-compatible replacement accessory
Designed specifically for neonatal flow-sensor applications
Supports neonatal respiratory monitoring
Abrasion and tear-resistant construction
Premium-quality copper cathode manufactured to international standards with a minimum copper purity of 99.99%. Produced using advanced electrolytic refining technology for superior conductivity, corrosion resistance, and consistent quality. Suitable for wire rods, electrical cables, transformers, electronics, construction, automotive, and industrial manufacturing applications. Available in export-grade packaging with bulk shipment capability and flexible delivery terms.
The B30 monitor is a modular multiparameter patient monitor. The monitor is especially designed for monitoring in PACU, ED, Wards, Step down units, ICU, CCU and OR in regions where anesthesia gas monitoring is not required. It can also be used during transportation within the hospital.
The modular design makes the system flexible and easy to upgrade.
The monitor can be run either on mains power or batteries. Battery operation is initiated when the power cord is disconnected or when the mains power is lost during monitoring.
NOTE: Always use the B30 with batteries inserted. Otherwise all trend data and temporary settings are lost if the power cable is detached from the mains.
Rectangular Mesh products in 6.0m x 2.4m sheet sizes are general-purpose ribbed mesh sheets used to reinforce concrete slabs.
*SPECIFICATIONS*
Material Carbon Steel
Grade 500 Mpa
Length 6000mm x 2400mm
Main Wire: 6.75@100, 7.60@100. 8.60@100, 9.50@100, 10.70@100, 11.90@100 mm
Cross Wire: 7.60@200 mm
*STANDARDS*
Manufactured in accordance with AS/NZS 4671:2019
ACRS Certified
NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS)
*PACKAGING*
Unit of Measure Sheets
Pack Type Bundles
FCL Quantity 25MT
1242 Computer Cables Suppliers
Short on time? Let Computer Cables sellers contact you.
Specifications
Condition : Used
Stock Number : 00002
Shovels tools used for digging, scooping, and moving bulk materials.
Texture: Hand shovels feature smooth, powder-coated steel blades and ergonomic grip handles. Mining shovels have a rough, heavily textured, cast-steel armor surface with ultra-hard, granular weld-on teeth.
Style: Hand shovels are slim, lightweight, and single-operator oriented. Mining shovels are colossal, track-mounted, lattice-boom or hydraulic-arm heavy industrial structures.
Design: Manual variants use a simple dished blade attached to a straight shaft. Mining variants use a cable-actuated or hydraulic front-loading dipper bucket with a bottom-opening door.
Usage: Hand shovels move garden soil, sand, or snow. Mining shovels excavate massive mineral blast faces and load 300-tonne haul trucks in three to four rapid cycles.
High-Quality Original IRP Replacement Battery for Electronic Devices
Product Overview:
We specialize in supplying 100% genuine original IRP batteries, designed to deliver exceptional performance, reliability, and safety for your devices. Built with strict adherence to original manufacturer specifications, our batteries ensure seamless compatibility and long-lasting power.
Key Features & Advantages:
1. Genuine Original Quality: 100% original manufacturer parts ensuring optimal safety, voltage stability, and zero compatibility issues.
2. Long Cycle Life & High Capacity: Engineered for extended runtime, low self-discharge rates, and high capacity retention over time.
3. Strict Quality Control: Every battery undergoes rigorous factory testing prior to shipment, maintaining a defect rate of less than 0.1%.
4. Global Standards & Safety: Compliant with international safety and environmental regulations (CE/RoHS compliant standards).
Specifications:
- Brand: IRP
- Product Grade: Original / Premium Grade
- Application: Replacement battery service for electronic equipment
- Packaging: Secure original factory standard individual box packaging, protected with anti-static foam and outer carton for safe global transit.
- Customization & Supply Support: Reliable supply chain support, stable year-round capacity, and professional customer service.
Contact us today to get the best wholesale prices and reliable global shipping solutions!
Trench Mesh products in 6.0m x (200mm, 300mm, 400mm, and 500mm) sheet sizes and are a general-purpose ribbed mesh sheet used to reinforce concrete slabs with a narrow profile.
*SPECIFICATIONS*
Material Carbon Steel
Grade 500 Mpa
Length 6000mm x (200mm, 300mm, 400mm, or 500mm);
width is dependent on number of wires (3,4, 5, or 6)
Main Wire: 7.60@100, 10.70@100, 11.90@100 mm
Cross Wire: 4.00@300, 4.75@300 mm
*STANDARDS*
Manufactured in accordance with AS/NZS 4671:2019
ACRS Certified
NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS)
*PACKAGING*
Unit of Measure Sheets
Pack Type Bundles
FCL Quantity 25MT
Square Mesh products in 6.0m x 2.4m sheet sizes are general-purpose ribbed mesh sheet used to reinforce concrete slabs.
*SPECIFICATIONS*
Material Carbon Steel
Grade 500 Mpa
Length 6000mm x 2400mm
Main Wire (mm): 6.00@200, 6.75@200, 7.60@200, 8.60@200, 9.50@200, 7.60@100 mm
*STANDARDS*
Manufactured in accordance with AS/NZS 4671:2019
ACRS Certified
NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS)
*PACKAGING*
Unit of Measure Sheets
Pack Type Bundles
FCL Quantity 25MT
This machine a specially-designed point-cut rolling dual-purpose for vest & flat bags, is controlled by a computer, the step(servo) setting length system reduces the sealing-cutting dimensions errors, and the installation of photoelectric eyes track help make the position of figure of printing bags accurate, the computer numerical control can be selected to adjust the length of bag the machine will automatically stop and sound a warning if there is something wrong with the printing bags.
It is used for producing best bags and flat-opening bags with printing.The main motor adopts frequency control of motor speed to save more electricity and regulate speed more freely. The color code tracker with good performance makes the sealing and cutting length more accuralte and the error smaller .it adopts advanced computer to adjust length more freely and accurately.
It is used for producing vest bags and flat-opening bags with printing. The main motor adopts frequency control of motor speed to save more electricity and regulate speed more freely. The color code tracker with good performance makes the sealing and cutting length more accurate and the error smaller. It adopts advanced computer to adjust length more freely and accurately.
It is the suitable for ahead and later dealing with of cotton flax, wool, man-made hairs, terylene and blending twisted yarns. When model Y is packed yarns with, it could finish several dye processes such as swell, refining, bleaching, dying and pliability etc.
The distance of every yarn arranging machine sticks is ranging from 426 to 855 millimeters. So it is the suitable for dyeing of different twisted yarns especially FULL-Layers dyeing machine.
Standard Structure:
The body of machine and other parts which be getting in touch with dye are made of stainless steel named SUS-316, which has high erosion-resisting ability. High-efficiency axial-flow pump is made of stainless steel which is equipped with sealed mechanical device.
Accessories:
1.Rising curve is controlled by computer.
2.The system of self-motion by the computer control.
Our 500 MPa deformed bar is supplied in a range of bar diameters with ribbed profile providing a locking anchorage with surrounding concrete. Diameters over 36mm are available upon special order.
*STANDARDS*
Manufactured in accordance with AS/NZS 4671:2019
ACRS Certified
NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS)
*PACKAGING*
Unit of Measure Metric Ton (MT)
Pack Type Bundle
FCL Quantity 25MT
*SPECIFICATIONS*
Thickness: 3 ~ 26 mm available in other sizes on request
Width: 25 ~ 220 mm available in other sizes on request
Length Available: 6000/9000/12000 mm
Alloy Or Not:Non-alloy
Special Use:Free Cutting Steel
Model Number:3.5m
Tensile strength:low/mild/high
Application:Manufacturing, stranded conductors/ACSR/cable/fencing gab
Packing:Standard
Coil weight:3-8t
Technique:Zinc coating
Coated or not:Coated
