Find Verified Wire Mesh Suppliers, Manufacturers and Wholesalers

Function characteristics :

Light weight, convenient to carry and operate in any area.
Highly reliable circuit design and high quality electron element.
Flexible input mode of welding parameter.
Simple and clear operation process.
Long-term and reliable work.
Swiftly output response time when power supply breaks, high stability.
Indication to the work state.
Large capacity welding data storage.
Warn function of open and short circuit of load.

Parameter :
Article No. KEW-2
Name Electro fusion welding machine
Welding range PE pipe and pipe fitting
Welding diameter 300 ~ 1600 mm
Nominal power 4 KW
Power supply Single phase 220 / 110V f+10%, 50 / 60 Hz
Weight 21 KG
Dimension 270 ?330 ?380 mm
Operating Temp -10=+C ~ 50=+C
Moisture below 85=+C
Data input mode Keypad or barcode scanning input.

Gas welding torches.

The series gabion mesh machines have been designed to make gabion mesh of various widths and mesh sizes. The possible coatings are heavily galvanized and zinc. For high corrosion resistance, zinc and PVC, galfan coated wire is available.

1.Width scope of weaving: 1-4m
Wire scope of weaving: 2-4mm
Mesh scope of weaving: 30-100mm
With 3 sets of mesh model at buyer's requirements
2.The machine is controlled by plc automatic controller, so only one person is needed to operate it 3.The output per minute: for example: if the mesh is 50x50mm, width: 2m, the output will be: 1m2 min.
4.Suitable wire to the machine: the tensile scope of the wire 300-500n/m2
5.Use compacting machine to make it into rolls
6.Total power of equipment 11kw
7.Weight of equipment: 4200kg
8.Outside size: main machine: 6700x1430x1800mm.

1, Max. speed can be 65 mesh per minute, speed can be adjusted with different raw materials.
2, Smooth operation, low noise. It will give an alarm at broken wire, broken mesh or at preset length.
3, Big width. It can weave double 1.25 m or single 2.5 m width.
4, Even and flat openings, wire can be added at any spot when weaving.
5, It has clutch brake device, can move by spot, flexible operation and has no high demand for operating personnel.
6, Reliable lubrication and convenient use.
7, Durable and strong, convenient maintenance.

Detailed Product Description Specifications:
1) Power of direct-current motor: 4kW
2) Exterior size of main machine: 2500 x 60 x 1600mm
3) Weight: about 1300kg
4) Exterior size of wire drawing frame: 3800 x 900 x 1200mm
5) Weight: about 1200kg
6) Exterior size of wire winding machine: 2000 x 1400 x 1100mm
7) Weight: about 600kg
8) Total power: 55kW
9) Exterior size of payoff reel: 1900 x 450 x 1000mm.

Dia of takeup wheel: 550mm
Draw die: 8dies
Max.Incoming diameter: 3.2-5.6mm
Outgoing diameter: 1.4-3.0mm
Total compressibility: 80%
Average partial compressibility: 18.25%
Drawing speed: 4.17m/s
Motor power: 1.32kw
Overall dimension: 5980x3300x164mm
Weight: 1400kg.

Cold rolled ribbed steel wire line
Model: zj5-12a
Max. Input wire diameter: 6-13.5mm
Min. Output wire diameter: 5-12mm (adjustable)
Total power: 22kw-100kw
Connection: 380v 50hz
Speed: 2.1m/s
Cutting length: <=12m
Place taken: 6x20m
Weight: approx. 10mt

Expanded metal mesh machine
Model: zj5-12a
Max. Input wire diameter: 6-13.5mm
Min. Output wire diameter: 5-12mm (adjustable)
Total power: 22kw-100kw
Connection: 380v 50hz
Speed: 2.1m/s
Cutting length: <=12m
Place taken: 6x20m
Weight: approx. 10mt

Decoiling-leveling-cutting the coil to desired plate.

Model: HFH04
Power supply: ac220v 50hz
Temperature range: 180½450
Iron handle: lf90/lf003
Heating element: ht70/90 (ht70 metal heater)

Power consumption: 90w
Temperature range: 180-450 centi-degree
Heating element: Imported 1321 ceramic heater

Model: DNW315-1500-25
Mesh width: 1000-1500 adjustable.
Mesh length: 6m for mesh sheet or 120m for mesh roll
Warp wire distance: 25-300mm adjustable
Weft wire distance:25-300 adjustable
Electrode number: 61 sets
Welding wire diameter: 1-4mm
Wire material: stainless wire or low carbon wire
Wire surface: clean, or galvanized
Welding speed: 80times/min
Capability: 80strokes/min
Total power: 63KVAX5=315KVA
Air press: 0.6Mpa.

This machine adopts multifunctional weft wire positioning device, which has won the patent no.Zl02200273.0, it can fix the weft wire accurately with simple structure and convenient operation. This kind of machine adopts closed straightened wire device, upright gearbox and electromagnetism stepless adjustable speed, integrated clutch sends the weft, the hole of mesh is very even and firm. Welding is controlled by 3-phase power electronics. This machine stop working by digital control, adjustable control is also very meticulous
Width 609.6(2)1219.2(4)(mm)
Aperture(inch) 1/2-1, 1/3, 3/8-3/4
Diameter(mm)
0.65-2.0
0.65-1.2
0.61-1.5
Speed(mesh/min) 50
Length(m)120400.


1.5*2.3*1.6m
2750kg

Max. Input wire diameter: 6-13.5mm
Min. Output wire diameter: 5-12mm (adjustable)
Total power: 22kw-100kw
Connection: 380v 50hz
Speed: 2.1m/s
Cutting length: <=12m
Place taken: 6x20m
Weight: approx. 10mt.

Model: ct-1.6-5.8
Cutting wire dia. 1.6-5.8mm
Cutting length: 60-6000mm
Cutting speed: 80-100m/min
Wheel speed: max. 912.8r/min
Dimension: 1750x600x1260(main part)
Weight: 900kg

Technical parameters:
Production capacity: (ping / h) 25-60
Wire diameter: (mm) ¦2.0-¦4.0
Production of double wire
Description:
Wire standards accord: gb3081-82 yb544-65
Wire materials: b 1 f-b 3f
Mesh width: (mm) 600-2000
Mesh length: optional
Power: motor: 3.0kw 4.0kw1 0.12 kw.

Small welded wire mesh machine
Technical parameters:
Welded mesh (mm): 6.35-12.7 (1 / 4 "-1 / 2")
Welding net width (mm) : 914.4-1219 .2 (12 "-48")
Wire by the (mm): dia.0.45-dia.1.07 (bwg25-bwg19)
Volume production for each length: 120m (400 ')
Welding speed (mesh / minute): 75 (radia)
Energy consumption: 380/220v 50-60hz 50kva * 4
Machine dimensions (mm): 2350 * 1820 * 1700

Solid state HF welder

SSARC1800 dc arc inverter welder has the following characteristics:
Features:
1. Compact structure, small, light, portable, easy to carry, energy saving. The electric welding mahcine is one of the smallest and lightest in the world.
2. Direct and reliable welding current digital display.
3. Automatic compensation for electricity voltage pulsation.
4. Advanced IGBT inverter technology, electronic circuit design, handy power supply.
5. Easy arc initiation, stable welding current, fast dynamic response, no welding noise, low welding spatter, no magnetic bias, smooth weld appearance.
6. Safe, stable and reliable operation, good efficiency.

Applications:
1. Suitable for carbon steel, stainless steel, alloy steels and others require
High quality weld applications.
2. Shipyards.
3. Electric power, petrochemical Constructions.
4. Maintenance shop.
5. Light and heavy industries.
6. Boiler pressure container manufacture.
SPECIFICATIONS
SSARC1800

Input power voltage (V)
AC230í+10%

Rated input current(A)
24A

Input AC(HZ)
50/60

NO-load voltage(V)
80

Output voltage(V) 27.6V

Output current range(A)
5-180

Protection class
IP21

Efficiency(%)
85

Duty cycle(%)
60

No-load power(W)
30

Power factor cos
0.93

Net Weight(KG)
4.7

Product size:
LxWxH(cm)
31x13x21

Carton :
LxWxH(cm)
39.5x31x29 (2pcs/carton)

Standard: CE,EMC
Trademark: OEM/SONSCN/neutral


1. accessories:welding holder ,welding cable,earth clamp
1 set/white box 2boxes/carton size:38x33x31cm
2. accessories:welding holder,welding cable,earth clamp,wire brush,welding mask
1set/plastic box 3boxes/carton size:47.5x46x49.5cm