Find Verified Weighing Scales Measures Suppliers, Manufacturers and Wholesalers

Product Name:
S type Force Sensors

Features:
1. Miniature S type Tension Load Cells are small and it is easy to install them.
2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency.
3. The load cells are made of stainless steel and provide robust construction.
4. The load cells utilize strain gauge technology and provide high dynamic frequency

Applications:
Miniature Compression and Tension Load Cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc.

Technical Specification:
Rated output
2.0 ± 5% mV / V
Zero balance
±2 % F.S.
Non-linearity
0.03% F.S.
Hysteresis
0.03% F.S.
Repeatability
0.03% F.S.
Creep (30min)
0.03% F.S.
Temp. effect on output
0.025% F.S. / 10ºC
Temp. effect on zero
0.025% F.S. / 10ºC
Input impedance
350±5Ω
Output impedance
350±5Ω
Insulation resistance
�5000MΩ/100VDC
Recommended excitation
5-10V
Maximum excitation
15 V
Compensated temp range
- 10 ~ 60 ºC
Operation temp range
- 20 ~ 80ºC
Safe overload
120%
Ultimate overload
150 %
Cable size
Ã?5Ã?3m
Wiring
Red: + Excitation Black: - Excitation
Green: + Signal White: - Signal

Detailed Product Description

Weighing Controller IN-420

Interchangeable With ATRAX 420 PLUS INDICATOR

RS485/RS232 signal output with Modbus rtu available
2 RELAYS(Optional)
Free PC software with programable for all function
Special Function
Fast speed
High accuracy



Weight Controller Function:
â?¢ Auto zero scale â?¢ Auto zero tracking â?¢ Normal weighing
â?¢ Peak â?¢ Counting â?¢ Zero scale â?¢ Gross/Net
â?¢ Tare â?¢ RS-232C â?¢ RS-485 â?¢ Print interface (PS805 Printer)


Has an A/D adopted conversion technology of a 24-bit microprocessor with a rate of conversion of 200 cycles
per second and drives up to eight 350Ω or sixteen 700Ω load cells.

With a SS304 stainless steel wash down enclosure is ideal for the food industry, agricultural industry, and industrial applications
and COMPLY WITH STANDARD OF NTEP III/IIIL, 10000 and Measurement Canada III, 10000; III HD 20000.
COMPLY WITH STANDARD OF NTEP III/IIIL, 10 000
COMPLY WITH STANDARD OF Measurement Canada III, 10 000; III HD 20 000
Material: Stainless steel SS304
IP Rating: IP66
LED 6-digit display
Power Supply: AC adaptor, 100-240VAC, 50-60Hz
Parameter and calibration settings are performed on the front panel
LABRADOR computer software for parameter and calibration settings
Units of Measurement: kg, lb
Improper operation and fault indication
Two way relay signal output
Equipped with RS-232 and RS-485 connecting ports
Print functions with programmable print format
Built-in clock
Weight Controlloer Data

Enclosure MaterialStainless steel SS304
Units of Measurementkg, lb
Working Humidityâ?¤90% RH
Working Temperature-10°C to 40°C/14°F to 104°F
Dimensions (mm)226mm x 71mm x 161mm
Dimensions (in)8.9in x 3.7in x 6.34in
Display TypeLCD
Display Digits6 digits
Digit Height25.4mm/1in
Display Dimensions143mm x 41mm/5.6in x 1.6in
Power SupplyAC adaptor, 100-240VAC, 50-60Hz
IP Rating
IP66

Division1, 2, 5, 10
Tare Range100% of Cn
Maximum Number of Load Cells8350Ω or 16700Ω
Maximum Power Consumption6VA
Excitation Voltage5VDC ± 5%
Fusible Link Fuse (slow blow)1A
Communications InterfaceRS-232C, RS-485
Print InterfaceSerial interfacr

Detailed Product Description
Categories canister and compression load cell
Model IN-RC3
Pattern Column Cylinder Type
Transform Type Resistance Strain
Out-Wire 4-Wire
Output Signal Type Analog Type
Material Stainless Steel/Alloy Steel
Capacity 5T, 10T, 20T, 30T
IP Rating IP68
Application Truck Scale
Accuracy OIML C2 C3
FOB port SHANGHAI
Terms of Payment L/C

Detailed Product Description
0.1G High precision Batching Controller - BS-50000-------------Accuracy up to 0.1g

batching scale controller
Batching Controller Advantages

* Accuracy up to 0.1g
--- Can auto calibrate the close time of valve according to batching speed to reach high precision
* Output port function for site programming
* Can be widely applied to chemical, building materials, food, feed and other industries
quantitative packaging or multi-material automatic batching system.
* Super strong communication function, so that the host computer can easily and reliably
send a variety of ingredients to a number of controllers, or from a variety of controllers to
read a variety of data to form a large-scale batching system.



Batching Controller Function
*Auto zero tracking
*Panel digital calibration, capacity, division value,
decimal point, overload value, zero range all can be
set by panel digital
*Formula table and material table both can be programmed by keyboard and host computer
Can store 10 kinds of formula and material table
of 10 kinds of materials
*Add in weigh & loss in weigh optional
* Can set continuous batching times
* Overshoot value auto modify, jog feeding
* With 4-way programmable switch value input


* With 4-way programmable switch value output
* Gross weight, net weight, tolerance display optional when batching
* Manual discharge, feeding optional
* With WATCH DOG circuit
* With RS232C and RS485 serial communication interface, baud rate optional, can set the
communication address for multi-machine communication
* Can do various operations by panel keyboard, switching output or host computer
communication
* Built-in load cell bridge power supply
* With alarm like overload, underload, over tolerance, material blocking and other
working state prompt

Detailed Product Description
Touching electrostatic eliminator also named human body electrostatic eliminator.

With the rapid development of industrial economy,
more and more appear particularly important to eliminate static electricity.
The human body electrostatic eliminator which adopts a passive circuit,
the circuit works by electrostatic human body, finally to eliminate the electrostatic effect.
Its features are: small size, light weight. Without power supply. Convenient installation.
The characteristics of static elimination without feeling.
Touching type electrostatic eliminator,
the appearance is made of stainless steel tube and the ball is made of stainless steel,
which is suitable for chemical industry, metallurgy, military, oil, fireworks, computer room,
high-grade hotels,hotel, office and other inflammable and explosive places.
The circuit principle and the other is basically the same,
it is the biggest characteristic of energy at the temperature of -50~100 â?? normal work.

Human Body Electrostatic Eliminator/Touching Electrostatic Eliminator Technical indicators
1). The human body electrostatic voltage: V 20KV
2). Static release time: t 100mS
3). The maximum release current: I 0.1mA
4) the environment temperature: 20
5). Environmental humidity: 80% (40)

Human Body Electrostatic Eliminator/Touching Electrostatic Eliminator Test conditions and results
The human body electrostatic voltage: 18KV environment temperature: 20 â??
The five fingers release time
+
0.091s
residual voltage -10V
The five fingers release time
-
0.090s
residual voltage -10V
Palm release time
+
0.084s
residual voltage -9V
Palm release time
-
0.082s
residual voltage -9V

Electrostatic elimination time conforms to the ESD standard

The use and installation methods:
just a finger touch the metal ball 0.1s can eliminate the static electricity of the human body.
The base type electrostatic elimination ball: first through a screw nut screw at the bottom
of the tube on the stainless steel wire, grounding wire with the best of not less than
0.3 square multi strand wires to the ground.
No base type electrostatic eliminating ball: the ball electrostatic eliminator ahead
buried underground needs at least 400mm, a header body upward, thus completed the installation.
Maintenance:
Do not enter the debris inside the steel tube, especially metal objects,
because there are the original circuit, if the metal circuit does not work.

Detailed product description
Antistatic tooth brush esd brush, antistatic brush, cleaning brush

Antistatic tooth brush esd brush, antistatic brush, cleaning brush species:
1 anti-static brushes according to shape can be divided into:
Brush type (also known as crank type), paint brush type, u type, abnormalfour.
2 according to the brush hair softness can be divided into:
Hard hair, fur two.
According to materials can be divided into 3:
Pp plastic handle with pa nylon bristles;
Wooden handle with animal hair.
Plastic anti-static brushes that
Antistatic toothbrush brush on the market can be divided into: large, medium and small, suitable for cleaning of various electronic components, pcb board, pcb board also can brush.
Paint brush brush can be divided into: round handle, straight handle two kinds, each with size, suitable for cleaning of various electronic components, pcb board.
U type brush is also divided into large, medium and small, suitable for cleaningof various electronic components, pcb board, pcb board also can brush.
Special brush for some processes for aluminum alloy special design, such asplastic printing production of anti-static brush.
How to choose:
The brush hair anti-static brushes of the soft and hard choice, should be based on the components in the pcb board to clear requirements to be, afraid of being scratched by selecting suitable soft brush, but the effect of cleaningbristle brush dominant.