Please click here to check who's online and chat with them.

Find Verified Construction Chemicals Suppliers, Manufacturers and Wholesalers

Apr-24-20
Supplier From New York, New York, United States
 Inquire Now  
Solvent based modified bituminous rust proofing , waterproofing emulsion incorporating elastomers and reinforcing agents.

PROPERTIES
Colour : black

Solids : 70 ± 2%

Specific gravity 1.40 at 25 C

Theoretical Coverage 3 5 m2/lit (@ 70u M)

DRYING TIME : AT 25 T
To touch: 15 min

To Recoat: 2 hours

Max.overcoat interval: Not applicable

Vehicle type: bitumen coal tar

Flash Point: 35C.

Tollens Solvbit imparts outstanding weather and light chemicals resistance. Surface has to be primed with Tolokote bitumen emulsion, if the surface is very dry or porous. The dry film provides a durable, flexible coating, which will not brake under severe climatic conditions. Typical range: -10C - +70 C
Apr-24-20

Epoxy Top Coat

MOQ: Not Specified
Supplier From New York, New York, United States
 Inquire Now  
A two pack high build epoxy Polyamide based under coat containing inert pigments. It is recommended as a final coat in an Epoxy system

CHARACTERISTICS
High build in single coat.
Excellent resistance to fresh and salt water
Abrasion resistance and flexible films.
Excellent inter-coat adhesion.
Resistant to solvents.
Resistance to mild acids.
USES
Coating for long term protection for structural steel, concrete surface and internal lining of edible oil tanks, and fuel tanks. Suitable for marine installations, power plants, fertilizers, hospitals, laboratories, etc.
Apr-24-20

G P Thinner

MOQ: Not Specified
Supplier From New York, New York, United States
 Inquire Now  
G P THINNER
It is a blend of Alcohol's, Aromatic Solvents and specialty solvents. This thinner is recommended for spray application of oil based Enamels, Primers, Nitrocellulose Paints, Acrylic Paints and Epoxies. This is also recommended for cleaning of equipments & tools. It is strictly not recommended for Polyurethane coatings.

PROPERTIES
Colour : Crystal Clear

Odor: Characteristic

Non-volatile matter : NIL

S.g kg/l :0.850�±0.05

Flash Point (ASTM D93): Not less than 12 �°C
Apr-24-20

Acrylic Thinner

MOQ: Not Specified
Supplier From New York, New York, United States
 Inquire Now  
ACRYLIC THINNER
IT is a blend of Alcoholâ??s, Aromatic Solvents and specialty solvents. This thinner is recommended for spray application of oil based Enamels, Primers, Nitrocellulose Paints, Acrylic Paints and Epoxies. This is also recommended for cleaning of equipments & tools. It is strictly not recommended for Polyurethane coatings.

PROPERTIES
Colour : Crystal Clear

Odor : Characteristic

Non - volatile matter : Nil

S.g kg/l: 0.850�±0.05

Flash Point (ASTM D93) Not less than 12 �°C

Description
Review
Apr-24-20
Supplier From New York, New York, United States
 Inquire Now  
Polyurethane Coating is two component chemically cured product that forms a film that is resistant to chemicals, solvents and abrasion.

PROPERTIES
Colour : Full spectrum

Solids: 50 +/- 2 %

Theoretical Coverage 10 - 11 m2/lit

DRYING TIME : AT 25 C
To handle: 3 hours

To Recoat: 5 hours

Flash point: 27C

Specific gravity: 1.10 �±0.05

Pot life: 6 hours

Mixing ratio: 4 parts base "A" :1 part hardner "B"

Solvent: Polyurethane thinner.

High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
10 Construction Chemicals Suppliers
Short on time? Let Construction Chemicals sellers contact you.
Jul-17-17
Supplier From New York, United States
 Inquire Now
Jun-26-20
Supplier From New York, United States
 Inquire Now
Jul-07-17
Supplier From New York, United States
 Inquire Now
Oct-22-19
Supplier From New York, Ny, United States
 Inquire Now
Oct-06-21
Supplier From New York, United States
 Inquire Now
10 Construction Chemicals Suppliers
Short on time? Let Construction Chemicals sellers contact you.
  • First page
  • Next
See what buyers and suppliers are discussing in Construction Chemicals import export community